The brake line lock is one of the many possible upgrades in one's vehicle. While your car can work just fine without them, the brake line lock can do considerable improvement in your car's performance. This is precisely why countless on- and off-road drivers prefer to have a brake line lock in their braking systems. If you are planning to ride on the bandwagon, it is better to equip yourself with knowledge. Following are some information you need to consider before buying a new brake line lock for your car.
Ball valve vs. solenoid valve
Two kinds of brake line locks are most common in the aftermarket industry today-the one with ball valve and the one with solenoid valve. While both are effective and good in their own ways, it's better to see which one will be perfect for your car.A ball valve brake line lock is relatively larger than the solenoid valve. It has a high flow rate that can deliver considerable amount of brake fluid to your wheels for better control. However, also due to its size, it is difficult to find a place for it install inside the car. Also, it reacts slower than the solenoid valve.
The solenoid valve, on the other hand, is lightweight and compact, making it easier to install. It has a fail-safe design that is normally open or closed. In addition, this kind of brake line lock reacts faster and has higher life cycle than the ball valve. However, the solenoid valve accommodates lower amount of pressure than the ball valve.
Work under pressure
One major consideration in buying a brake line lock is the amount of pressure it can handle. The device's reliability largely depends on this particular aspect. A typical brake line lock for on-road purposes can handle a pressure of 1,500 psi. However, there are brake line locks in the market offering greater braking power with 3,000 psi. Think of how much you will be needing the brake line lock and determine the amount of pressure your car would most likely require.
The brake line lock is usually sold in a kit with other tiny parts. These parts are to be installed and mounted onto your car individually. If you do not consider yourself as a do-it-yourself person but would want to install this device to your car, you might want to consider the ease of the installation of the brake line lock. Check the instruction manuals and see if you can handle the process. Take note that the small parts will be installed near crucial parts of the car and one mistake can cause a lot.