Have you repaired a crank handle before? It's not as complicated or tricky as you think it is. It's a very simple project that you can perform by yourself. You just have to be equipped with a clip remover and a bit of patience to fix your window handle. So the first thing you must do is to set the removal tool in place and then rotate the handle until the c-clip is caught up and removed from its slot. If it takes you more time, the clip must be too far to reach, so just continue what you're doing until the clip pops out of the handle. With just the right amount of force, pull the crank handle from the area. Next, partially put back the clip in the slot and then attach the handle again. Use the clip remover again so that the clip can snap back and lock in place. Lastly, check the handle if it's working properly again. If it rotates smoothly, then you've done it right! Now you can close and open your window without any hassle at all! So if you don't have a clip remover yet, get it here at Auto Parts Warehouse where you can purchase the best auto parts and accessories at very low prices! And if you purchase more than $50 worth of products, we'll deliver them for free! So start clicking and buy yours today!