Fits the vehicle:
Cadillac Seville, 1989-1991
"Fits Front And Rear, Driver And Passenger Side, Supplied With Gear, Supplied Without Regulator".
- 1989-1989: 8Cyl 4.5L "Gas, FI, VIN "5" Base
- 1989-1989: 8Cyl 4.5L "Gas, FI, VIN "5" STS
- 1990-1990: 8Cyl 4.5L "Gas, FI, VIN "3" Base
- 1990-1990: 8Cyl 4.5L "Gas, FI, VIN "3" STS
- 1991-1991: 8Cyl 4.9L "Gas, FI, VIN "B" Base
- 1991-1991: 8Cyl 4.9L "Gas, FI, VIN "B" STS
If you don't see your model here, call us at 1-800-913-6119, or click here for a live chat with a parts specialist.
A1 Cardone
CARDONE Industries, Inc. has been a leading global supplier of automotive products for over 35 years. With A1 CARDONE, our brand of remanufactured parts, and CARDONE Select, our brand of totally new parts, we offer 61 product lines under eight divisions: Brakes, Drivetrain, Electronics, Engine, Motors, Pumps, Rotating Electrical and Steering. We also offer tools and accessories under the brand, CARDONE Service Plus. CARDONE embraces the "cleantech" philosophy, not only through the very nature of remanufacturing, but in every aspect of our operations. Even with our new products, we offer our customers the opportunity to send their used parts back to us for recycling. Cleantech is any technology that promotes the more efficient use and re-use of the earth's resources in industrial production. Improved operational performance is achieved, while overall costs, energy consumption, waste and pollution are reduced.
-
Overall Rating: 
4 out of 5
Good product, small bolts,
August 15, 2008
By JD in Texas from Houston, TX
| Appearance: | | 4 out of 5 |
| Ease of Use/Installation: | | 3 out of 5 |
| Quality: | | 4 out of 5 |
| Performance: | | 5 out of 5 |
- Pros: works well
- Cons: bolts too small
"The motor itself worked great. Took 5 hours to install, but ony because I had to drill out the rivets on the original. Only drawback was that the bolts were too small for the holes in the door panel, and there wasn't quite enough of them. I compensated by"
-
Overall Rating: 
5 out of 5
good replacmement motor,
May 01, 2008
By Jimmy from Columbia, SC
| Appearance: | | 5 out of 5 |
| Ease of Use/Installation: | | 5 out of 5 |
| Quality: | | 5 out of 5 |
| Performance: | | 5 out of 5 |
- Pros: exact fit replacement
- Cons: none
"Good price on a rebuilt unit. The unit worked great once installed. It came with attaching screws that were a little to small so I used my own 3/16 inch pop rivets to install (like the factory motor had). Hardest part of doing the job was to drill out the"
-
Overall Rating: 
4 out of 5
worked good,
April 06, 2008
By mykle
| Appearance: | | 4 out of 5 |
| Ease of Use/Installation: | | 4 out of 5 |
| Quality: | | 4 out of 5 |
| Performance: | | 4 out of 5 |
- Pros: Replces OEM
- Cons: hard to remove rivets
"The window motors are a good OEM replacement , they were pretty easy to install. Taking out the old ones were much harder."
-
Overall Rating: 
4 out of 5
Cavalier Window Lift Motor,
March 25, 2008
By Al the Elder from SW Connecticut
| Appearance: | | 4 out of 5 |
| Ease of Use/Installation: | | 3 out of 5 |
| Quality: | | 4 out of 5 |
| Performance: | | 4 out of 5 |
- Pros: Worked without a hassel
- Cons: None
"The window lift motor worked without any problem. It's important for the weekend mechanic to remember that no job on a modern auto is easy. No matter where the parts come from, the job is going to be the same. My best review is that the part that I purcha"
-
Overall Rating: 
5 out of 5
March 11, 2008
By mike
| Appearance: | | 5 out of 5 |
| Ease of Use/Installation: | | 3 out of 5 |
| Quality: | | 4 out of 5 |
| Performance: | | 5 out of 5 |
"this was a great price i got two for the price of one."