- Award-winning customer service
- Free shipping on orders over $50
- 30-day no-hassle returns
- Authorized distributor
- 100% secure shopping guaranteed
Dimmer SwitchWe have 102 Items for Dimmer Switch In-stock.
Select your Dimmer Switch vehicle from the list below.
When on the road, there are different scenarios wherein you need different levels of illumination. For example, if you are traversing a dimly lit alley, you need to have your headlights emit stronger beams, while, on the contrary, if you are driving on a bright sunny day, such electronic lighting is something you do not need at all. The trick to controlling the brightness of your headlights lies on the Dimmer Switch. You see, this switch is used to set your headlights from high beam to low and back again. So since having the right amount of illumination is an important factor when it comes to road safety, it is a must that you ensure your switch is always functioning. No driver would want to risk experiencing a collision just because the Dimmer Switch in his car is erratic anyway. In getting a new dipswitch, be sure to buy a product that is made from quality materials and promises a direct fit for the specifications of your vehicle. By getting the right switch, you can ensure full control over your car's headlights. Should you need a Dimmer Switch for your ride, let Auto Parts Warehouse be of assistance to you. We guarantee that the product you will get from us is top-quality and built to last long. Browse our online catalog and order one now!
Selecting the Right Type of Dimmer Switches for Your Car
Prior to the development of interior and exterior lighting, driving at night was a very taxing and altogether dangerous affair. With the addition of a dimmer switch, things became far easier. In general, the switch very rarely breaks down. In the event that it does-which is why you're checking this out-there are a few pointers that you need to know to make the choice a smart one.
Dimmer switches have evolved quite significantly over the years, and there three distinct types that will strongly influence your purchase:
- Dash-mounted, knob-type: Most cars released in the 90s and early 2000s have this type of switch. It's simple enough to operate and requires just a twist to go from ?off' to ?bright' and all gradients in between.
- Steering column-mounted, stick-type: This is the most common of all the different switch types and certainly the most convenient given how close it is to your fingers when you drive. It has numerous axes of motion that allow you to control both headlights and your interior lighting as well.
- Floor-mounted: You will not likely find this type of switch on any modern car as they are the earliest for of dimmer switch. This had the least options to cycle through. They were popular for being so easy to operate-you just had to slide your foot a little!
The bottom line
When you search for a switch replacement, the type of switch you have has to be carefully noted because you might just end up ordering one, only to find that it's not the one you need. The easiest thing to do is search an online retailer based on the specific year, make, and model of your vehicle. This will minimize the possibility of making a costly mistake, and it also takes away the hassle of having to re-order the right piece!
Switching Out Your Old Dimmer Switch for a New One
Unless you're the type of motorist that just enjoys blinding other drivers on the road, it's important that the dimmer switch on your ride remains in tip-top condition. For most people, this kind of do-it-yourself project seems like mission: impossible. The truth is, however, that it's a pretty do-able project. All you truly need are the right tools, a lot of patience, and this very simple and handy guide!
Difficulty level: Moderate
Stuff you'll need:
- New dimmer switch
- Socket set
Step 1: Make sure than your engine is shut off and the battery disconnected. It's a safe bet to let about half an hour to pass before you start working-especially since this will involve a lot of electrical work.
Step 2: Use your screwdriver to gently pry off the trim panel located near the left side of the steering wheel.
Step 3: Take off all the screws that hold your dimmer switch in place-it's under the trim panel you just pried out. Do not yank the dimmer switch out at this point as you might end up severing the electrical wiring that holds it in place.
Step 4: Take note of the way that the dimmer switch is wired. Write it down or sketch it out if it will help you.
Step 5: Carefully disconnect the electrical connections-do it one at a time, in fact.
Step 6: Wire your new dimmer switch in the same way as the old one.
Step 7: Reconnect the battery to test the switch out before closing up the trim panel again.
Step 8: If everything is a-ok, just make sure that the switch is properly installed and the trim panel flush with the rest of your dash. Voila! You're done!
- As you are going to handle electrical wires, always wear insulated gloves to protect yourself from nasty shocks.
- Do not forget the rest of your safety gear, though! Goggles to protect your eyes and closed-toed shoes to guard your toes should be the bare minimum.