Chevy S10 Blazer Intakes

K&N 57 SERIES GENERATION I FIPK COLD AIR INTAKE SYSTEM -- Provides Additional Power Up To 5.58 h.p. At 3963 RPM, 96%-99% Filtration Efficiency Rate, It Creates A Radius Entry That Allows The Engine To Ingest A Greater Volume Compared To The Factory Intake System For More Usable Power And Acceleration Throughout The RPM Range, Significantly Reduces Intake Restriction As It Smoothens And Straightens Air Flow, C.A.R.B. Certified, Street Legal In All 50 US States, Comes With A Washable And Reusable Filter, Easy Installation, With K&N's Limited Million Mile Warranty

Fits the following 1988-1993 Chevrolet S10 Blazer submodels:

• 1988-1989: High Country; 6 Cyl 4.3L;
• 1988-1990: Sport; 6 Cyl 4.3L;

• 1988-1993: Base; 6 Cyl 4.3L;

• 1988-1993: Tahoe; 6 Cyl 4.3L;

• 1991-1993: Tahoe LT; 6 Cyl 4.3L;

Fits 3 more submodels. (Show all) Show less info

K&N 57 SERIES GENERATION I FIPK COLD AIR INTAKE SYSTEM -- A Replacement Intake System For The Vehicle's Restrictive Factory Air Filter And Air Intake Housing, Efficiently Increases Up To 4.66 Horsepower At 3971 RPM, Creates A Radius Entry That Allows The Engine To Ingest A Greater Volume Of Air Compared To The Factory Intake System, Dramatically Reduces Intake Restriction As It Smoothens And Straightens Air Flow, Allows The Vehicle's Engine To Inhale A Large Volume Of Air Than OEM Air Filter Assembly For More Usable Power And Acceleration Throughout The Engine's RPM Range, Comes With A Washable And Reusable Filter, Street Legal In All 50 US States, Easy Installation, With K&N's Million-Mile Limited Warranty

Fits the following 1994 Chevrolet S10 Blazer submodels:

• 1994-1994: Base; 6 Cyl 4.3L;
• 1994-1994: LT; 6 Cyl 4.3L;

• 1994-1994: Tahoe LT; 6 Cyl 4.3L;

• 1994-1994: Tahoe; 6 Cyl 4.3L;

Fits 2 more submodels. (Show all) Show less info

Fits the following 1992-1994 Chevrolet S10 Blazer submodels:

• 1992-1994: All Submodels; All Engines;

DORMAN AIR INTAKE HOSE -- A Direct-Fit OEM Replacement Air Intake Hose, Brings Air From The Air Cleaner Box Into The Throttle Body And Then Into The Engine Cylinder, Keeps Dirt And Debris Out Of The Engine, Greatly Helps In Ensuring That The Proper Mixture Of Air Will Take Place, Prevents The Engine From Stalling Out And The Acceleration From Getting Sluggish, Helps Improve Gas Mileage And Avoid Rough Idle, Replaces OE Part Number 25098669, With Dorman's Limited Lifetime Warranty

Fits the following 1992-1994 Chevrolet S10 Blazer submodels:

• 1992-1992: Sport; 6 Cyl 4.3L; "GAS, FI, VIN W"
• 1992-1992: Sport; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1992-1994: Base; 6 Cyl 4.3L; "GAS, FI, VIN W"

• 1992-1994: Base; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1992-1994: Tahoe LT; 6 Cyl 4.3L; "GAS, FI, VIN W"

• 1992-1994: Tahoe LT; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1992-1994: Tahoe; 6 Cyl 4.3L; "GAS, FI, VIN W"

• 1992-1994: Tahoe; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1994-1994: LT; 6 Cyl 4.3L; "GAS, FI, VIN W"

• 1994-1994: LT; 6 Cyl 4.3L; "GAS, FI, VIN Z"

Fits 8 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1983-1984 Chevrolet S10 Blazer submodels:

• 1983-1984: Base; 4 Cyl 1.9L; "GAS, CARB, VIN A"
• 1983-1984: Durango; 4 Cyl 1.9L; "GAS, CARB, VIN A"

• 1983-1984: Sport; 4 Cyl 1.9L; "GAS, CARB, VIN A"

• 1983-1984: Tahoe; 4 Cyl 1.9L; "GAS, CARB, VIN A"

Fits 2 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1985-1986 Chevrolet S10 Blazer submodels:

• 1985-1986: Base; 4 Cyl 2.5L; "GAS, FI, VIN E"
• 1985-1986: Durango; 4 Cyl 2.5L; "GAS, FI, VIN E"

• 1985-1986: Sport; 4 Cyl 2.5L; "GAS, FI, VIN E"

• 1985-1986: Tahoe; 4 Cyl 2.5L; "GAS, FI, VIN E"

Fits 2 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1983-1990 Chevrolet S10 Blazer submodels:

• 1983-1985: Base; 6 Cyl 2.8L; "GAS, CARB, VIN B"
• 1983-1985: Durango; 6 Cyl 2.8L; "GAS, CARB, VIN B"

• 1983-1985: Sport; 6 Cyl 2.8L; "GAS, CARB, VIN B"

• 1983-1985: Tahoe; 6 Cyl 2.8L; "GAS, CARB, VIN B"

• 1986-1986: Durango; 6 Cyl 2.8L; "GAS, FI, VIN R"

• 1986-1990: Base; 6 Cyl 2.8L; "GAS, FI, VIN R"

• 1986-1990: Sport; 6 Cyl 2.8L; "GAS, FI, VIN R"

• 1986-1990: Tahoe; 6 Cyl 2.8L; "GAS, FI, VIN R"

• 1987-1989: High Country; 6 Cyl 2.8L; "GAS, FI, VIN R"

Fits 7 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1983-1984 Chevrolet S10 Blazer submodels:

• 1983-1984: Base; 4 Cyl 2.0L; "GAS, CARB, VIN Y"
• 1983-1984: Durango; 4 Cyl 2.0L; "GAS, CARB, VIN Y"

• 1983-1984: Sport; 4 Cyl 2.0L; "GAS, CARB, VIN Y"

• 1983-1984: Tahoe; 4 Cyl 2.0L; "GAS, CARB, VIN Y"

Fits 2 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1988-1992 Chevrolet S10 Blazer submodels:

• 1988-1989: High Country; 6 Cyl 4.3L; "GAS, FI, VIN Z"
• 1988-1992: Base; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1988-1992: Sport; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1988-1992: Tahoe; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1991-1992: Tahoe LT; 6 Cyl 4.3L; "GAS, FI, VIN Z"

Fits 3 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1987-1988 Chevrolet S10 Blazer submodels:

• 1987-1988: Base; 4 Cyl 2.5L; "GAS, FI, VIN E"
• 1987-1988: High Country; 4 Cyl 2.5L; "GAS, FI, VIN E"

• 1987-1988: Sport; 4 Cyl 2.5L; "GAS, FI, VIN E"

• 1987-1988: Tahoe; 4 Cyl 2.5L; "GAS, FI, VIN E"

Fits 2 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Lower Set, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1992-1994 Chevrolet S10 Blazer submodels:

• 1992-1992: Sport; 6 Cyl 4.3L; "GAS, FI, VIN W"
• 1992-1994: Base; 6 Cyl 4.3L; "GAS, FI, VIN W"

• 1992-1994: Tahoe LT; 6 Cyl 4.3L; "GAS, FI, VIN W"

• 1992-1994: Tahoe; 6 Cyl 4.3L; "GAS, FI, VIN W"

• 1994-1994: LT; 6 Cyl 4.3L; "GAS, FI, VIN W"

Fits 3 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1993-1994 Chevrolet S10 Blazer submodels:

• 1993-1994: Base; 6 Cyl 4.3L; "GAS, FI, VIN Z"
• 1993-1994: Tahoe LT; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1993-1994: Tahoe; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1994-1994: LT; 6 Cyl 4.3L; "GAS, FI, VIN Z"

Fits 2 more submodels. (Show all) Show less info

VOLANT COLD AIR INTAKE KIT, WITH BOX -- A High Performance Cold Air Intake Kit That Is Engineered To Increase Horsepower And Engine Response, Features A Filter Box That Insulates And Protects The Filter From Pulling In Hot Air From The Engine Compartment, A Large Diameter Air Duct With Smooth Bends That Ensure A Less Restrictive Air Passage, And A Cleanable And Reusable Ram Filter That Optimizes Airflow Throughout The Intake System, Its Carbon Fiber Look Lid Contributes To The System's Sleek Design And Its Silicon Connectors Provide Flexibility While Maintaining Strength And Thermal Stability, 99.9% Efficient In Removing Dirt, Includes Stainless Steel Clamps, With Volant's Limited Warranty

Fits the following 1994 Chevrolet S10 Blazer submodels:

• 1994-1994: Base; 6 Cyl 4.3L; "Gas, FI, Naturally Aspirated, VIN Z"
• 1994-1994: LT; 6 Cyl 4.3L; "Gas, FI, Naturally Aspirated, VIN Z"

• 1994-1994: Tahoe LT; 6 Cyl 4.3L; "Gas, FI, Naturally Aspirated, VIN Z"

• 1994-1994: Tahoe; 6 Cyl 4.3L; "Gas, FI, Naturally Aspirated, VIN Z"

Fits 2 more submodels. (Show all) Show less info

Torker II Series, Intake Manifold, Non-EGR, 2500-6500 RPM, Cast Finish, Not For Sale Or Use On Emissions Equipped Vehicles, Recommend FelPro Gasket Part # 1256 For Manifold Gasket

Fits the following 1985-1986 Chevrolet S10 Blazer submodels:

• 1985-1986: All Submodels; All Engines;

Performer 4.3L T.B.I.. V6, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, EGR, Idle-5500 RPM, Street Legal, Free Computer Chip Provided, Cast Finish, Not For Vehicles With Flash Memory Computer, Use GM Intake Gasket Part # 101594

Fits the following 1988-1994 Chevrolet S10 Blazer submodels:

• 1988-1989: High Country; 6 Cyl 4.3L; "GAS, FI, VIN Z"
• 1988-1994: Base; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1988-1992: Sport; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1988-1994: Tahoe; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1991-1994: Tahoe LT; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1994-1994: LT; 6 Cyl 4.3L; "GAS, FI, VIN Z"

Fits 4 more submodels. (Show all) Show less info