Chevy S10 Pick Up Intakes

K&N 57 SERIES AIRCHARGER HIGH PERFORMANCE AIR INTAKE KITS

• Guaranteed to improve acceleration and power
• Specifically designed to fit your vehicle's engine compartment
• Simple installation, typically in less than 90 minutes
• Washable & reusable air filter lasts up to 100,000 miles before needing service
• Backed by the legendary K&N Million Mile Warranty
• CARB Exempt and street legal in all 50 states

Improve throttle response and power in your vehicle with a K&N 57 Series Aircharger high-performance cold air intake. These high-flow intake kits provide better air flow to your motor by replacing the factory air path with a larger diameter polyethylene tube. This charge of fresh air allows your motor to breathe better and immediately put out more power!

All 57 Series high-flow intakes include the largest conical high-performance filter that will fit in your engine compartment and still use OE holes and mounting points. The bigger filter surface area also allows more air to flow into the engine and captures more dirt, boosting service intervals up to up to 100,000 miles.

Note: Some K&N 57 Series systems won't not fit on applications with lift kits.

Fits the following 1994-1997 Chevrolet S10 submodels:

• 1994-1997: Base; 4 Cyl 2.2L;
• 1994-1997: LS; 4 Cyl 2.2L;

• 1994-1997: SS; 4 Cyl 2.2L;

• 1994-1997: ZR2; 4 Cyl 2.2L;

Fits 2 more submodels. (Show all) Show less info

K&N 57 SERIES AIRCHARGER HIGH PERFORMANCE AIR INTAKE KITS

• Guaranteed to improve acceleration and power
• Specifically designed to fit your vehicle's engine compartment
• Simple installation, typically in less than 90 minutes
• Washable & reusable air filter lasts up to 100,000 miles before needing service
• Backed by the legendary K&N Million Mile Warranty
• CARB Exempt and street legal in all 50 states

Improve throttle response and power in your vehicle with a K&N 57 Series Aircharger high-performance cold air intake. These high-flow intake kits provide better air flow to your motor by replacing the factory air path with a larger diameter polyethylene tube. This charge of fresh air allows your motor to breathe better and immediately put out more power!

All 57 Series high-flow intakes include the largest conical high-performance filter that will fit in your engine compartment and still use OE holes and mounting points. The bigger filter surface area also allows more air to flow into the engine and captures more dirt, boosting service intervals up to up to 100,000 miles.

Note: Some K&N 57 Series systems won't not fit on applications with lift kits.

Fits the following 1996-2004 Chevrolet S10 submodels:

• 2001-2004: ZR5; 6 Cyl 4.3L;
• 1996-2004: LS; 6 Cyl 4.3L;

• 1999-2003: Xtreme; 6 Cyl 4.3L;

• 1996-2003: Base; 6 Cyl 4.3L;

• 1996-2003: ZR2; 6 Cyl 4.3L;

• 1996-1998: SS; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info

K&N 57 SERIES AIRCHARGER HIGH PERFORMANCE AIR INTAKE KITS

• Guaranteed to improve acceleration and power
• Specifically designed to fit your vehicle's engine compartment
• Simple installation, typically in less than 90 minutes
• Washable & reusable air filter lasts up to 100,000 miles before needing service
• Backed by the legendary K&N Million Mile Warranty
• CARB Exempt and street legal in all 50 states

Improve throttle response and power in your vehicle with a K&N 57 Series Aircharger high-performance cold air intake. These high-flow intake kits provide better air flow to your motor by replacing the factory air path with a larger diameter polyethylene tube. This charge of fresh air allows your motor to breathe better and immediately put out more power!

All 57 Series high-flow intakes include the largest conical high-performance filter that will fit in your engine compartment and still use OE holes and mounting points. The bigger filter surface area also allows more air to flow into the engine and captures more dirt, boosting service intervals up to up to 100,000 miles.

Note: Some K&N 57 Series systems won't not fit on applications with lift kits.

Fits the following 1998-2003 Chevrolet S10 submodels:

• 2001-2003: ZR5; 4 Cyl 2.2L;
• 1999-2003: Xtreme; 4 Cyl 2.2L;

• 1998-2003: Base; 4 Cyl 2.2L;

• 1998-2003: LS; 4 Cyl 2.2L;

• 1998-2003: ZR2; 4 Cyl 2.2L;

• 1998-1998: SS; 4 Cyl 2.2L;

Fits 4 more submodels. (Show all) Show less info

K&N 57 SERIES AIRCHARGER HIGH PERFORMANCE AIR INTAKE KITS

• Guaranteed to improve acceleration and power
• Specifically designed to fit your vehicle's engine compartment
• Simple installation, typically in less than 90 minutes
• Washable & reusable air filter lasts up to 100,000 miles before needing service
• Backed by the legendary K&N Million Mile Warranty
• CARB Exempt and street legal in all 50 states

Improve throttle response and power in your vehicle with a K&N 57 Series Aircharger high-performance cold air intake. These high-flow intake kits provide better air flow to your motor by replacing the factory air path with a larger diameter polyethylene tube. This charge of fresh air allows your motor to breathe better and immediately put out more power!

All 57 Series high-flow intakes include the largest conical high-performance filter that will fit in your engine compartment and still use OE holes and mounting points. The bigger filter surface area also allows more air to flow into the engine and captures more dirt, boosting service intervals up to up to 100,000 miles.

Note: Some K&N 57 Series systems won't not fit on applications with lift kits.

Fits the following 1988-1993 Chevrolet S10 submodels:

• 1992-1993: EL; 6 Cyl 4.3L;
• 1988-1993: Base; 6 Cyl 4.3L;

• 1988-1992: Tahoe; 6 Cyl 4.3L;

• 1991-1991: Baja; 6 Cyl 4.3L;

• 1988-1990: Durango; 6 Cyl 4.3L;

• 1988-1989: Sport; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info

K&N 57 SERIES AIRCHARGER HIGH PERFORMANCE AIR INTAKE KITS

• Guaranteed to improve acceleration and power
• Specifically designed to fit your vehicle's engine compartment
• Simple installation, typically in less than 90 minutes
• Washable & reusable air filter lasts up to 100,000 miles before needing service
• Backed by the legendary K&N Million Mile Warranty
• CARB Exempt and street legal in all 50 states

Improve throttle response and power in your vehicle with a K&N 57 Series Aircharger high-performance cold air intake. These high-flow intake kits provide better air flow to your motor by replacing the factory air path with a larger diameter polyethylene tube. This charge of fresh air allows your motor to breathe better and immediately put out more power!

All 57 Series high-flow intakes include the largest conical high-performance filter that will fit in your engine compartment and still use OE holes and mounting points. The bigger filter surface area also allows more air to flow into the engine and captures more dirt, boosting service intervals up to up to 100,000 miles.

Note: Some K&N 57 Series systems won't not fit on applications with lift kits.

Fits the following 1994-1995 Chevrolet S10 submodels:

• 1994-1995: Base; 6 Cyl 4.3L;
• 1994-1995: LS; 6 Cyl 4.3L;

• 1994-1995: SS; 6 Cyl 4.3L;

• 1994-1995: ZR2; 6 Cyl 4.3L;

Fits 2 more submodels. (Show all) Show less info

K&N 57 SERIES AIRCHARGER HIGH PERFORMANCE AIR INTAKE KITS

• Guaranteed to improve acceleration and power
• Specifically designed to fit your vehicle's engine compartment
• Simple installation, typically in less than 90 minutes
• Washable & reusable air filter lasts up to 100,000 miles before needing service
• Backed by the legendary K&N Million Mile Warranty
• CARB Exempt and street legal in all 50 states

Improve throttle response and power in your vehicle with a K&N 57 Series Aircharger high-performance cold air intake. These high-flow intake kits provide better air flow to your motor by replacing the factory air path with a larger diameter polyethylene tube. This charge of fresh air allows your motor to breathe better and immediately put out more power!

All 57 Series high-flow intakes include the largest conical high-performance filter that will fit in your engine compartment and still use OE holes and mounting points. The bigger filter surface area also allows more air to flow into the engine and captures more dirt, boosting service intervals up to up to 100,000 miles.

Note: Some K&N 57 Series systems won't not fit on applications with lift kits.

Fits the following 1994-1995 Chevrolet S10 submodels:

• 1994-1995: Base; 6 Cyl 4.3L;
• 1994-1995: LS; 6 Cyl 4.3L;

• 1994-1995: SS; 6 Cyl 4.3L;

• 1994-1995: ZR2; 6 Cyl 4.3L;

Fits 2 more submodels. (Show all) Show less info

KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM

This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum and oiled cotton gauze air filter. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!

Features and Benefits:

• Up to 99 percent filtration efficiency
• Provides additional power up to 11.3 h.p. at 5500 RPM and 10.9 lb.-ft. of torque at 5250 RPM
• Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter

Parts Included:

• Heat shield
• Intake tube
• Premium red air filter
• All necessary hardware for easy installation

Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.

Fits the following 1996-2004 Chevrolet S10 submodels:

• 2001-2004: ZR5; 6 Cyl 4.3L;
• 1996-2004: LS; 6 Cyl 4.3L;

• 1999-2003: Xtreme; 6 Cyl 4.3L;

• 1996-2003: Base; 6 Cyl 4.3L;

• 1996-2003: ZR2; 6 Cyl 4.3L;

• 1996-1998: SS; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info

KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM

This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum and oiled cotton gauze air filter. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!

Features and Benefits:

• Up to 99 percent filtration efficiency
• Provides additional power up to 7.4 h.p. at 4750 RPM and 23.7 lb.-ft. of torque at 1500 RPM
• Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter

Parts Included:

• Heat shield
• Intake tube
• Premium red air filter
• All necessary hardware for easy installation

Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.

Fits the following 1998-2003 Chevrolet S10 submodels:

• 2003-2003: ZR5; 4 Cyl 2.2L;
• 2003-2003: ZR5; 6 Cyl 4.3L;

• 1999-2003: Xtreme; 4 Cyl 2.2L;

• 1999-2003: Xtreme; 6 Cyl 4.3L;

• 1998-2003: Base; 4 Cyl 2.2L;

• 1998-2003: Base; 6 Cyl 4.3L;

• 1998-2003: LS; 4 Cyl 2.2L;

• 1998-2003: LS; 6 Cyl 4.3L;

• 1998-2003: ZR2; 4 Cyl 2.2L;

• 1998-2003: ZR2; 6 Cyl 4.3L;

• 1998-1998: SS; 4 Cyl 2.2L;

• 1998-1998: SS; 6 Cyl 4.3L;

Fits 10 more submodels. (Show all) Show less info

DORMAN INTAKE MANIFOLD KIT, PLASTIC -- 50-state legal; Includes plastic vacuum manifold, gaskets, and O-rings; Features reinforced aluminum coolant crossover that means there will be no repeat failure due to corrosion and vibration, integrated silicone gasket that means no separate gasket to deal with and fewer leak paths at cylinder heads and throttle body, and reinforced coolant passages that means stronger protection against recurring leaks; It also has thicker intake walls and better fillet design to prevent warping of the manifold at the gasket mounting surfaces; Designed to eliminate the double sided throttle body gasket; Replaces OE number 17113542.

Fits the following 1996-2004 Chevrolet S10 submodels:

• 2001-2004: ZR5; 6 Cyl 4.3L;
• 1996-2004: LS; 6 Cyl 4.3L;

• 1999-2003: Xtreme; 6 Cyl 4.3L;

• 1996-2003: Base; 6 Cyl 4.3L;

• 1996-2003: ZR2; 6 Cyl 4.3L;

• 1996-1998: SS; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info

AIRAID CLASSIC INTAKE SYSTEM

Airaid's Classic intake system is designed to add a new spin to vehicles with limited air flow to the original filter location. Its high flow air filter delivers exceptionally high filtration and its mandrel-bent powdercoated stainless steel intake tube moves the air inlet to a better location optimizing air flow at the drop of the throttle.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Mounting hardware included
• Silver tube finish
• Stainless steel tube material

Features

• Provides power up to 12 to 18 h.p.
• Up to 820 CFM
• Up to 100% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-520-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Fits the following 1996-2004 Chevrolet S10 submodels:

• 2001-2004: ZR5; 6 Cyl 4.3L;
• 1996-2004: LS; 6 Cyl 4.3L;

• 1999-2003: Xtreme; 6 Cyl 4.3L;

• 1996-2003: Base; 6 Cyl 4.3L;

• 1996-2003: ZR2; 6 Cyl 4.3L;

• 1996-1998: SS; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info

AIRAID CLASSIC INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; 99 percent filtration efficiency rate; Includes air filter, gray intake tube and all the parts necessary for easy installation; Adds a new spin to vehicles with limited air flow to the original filter location; Features Synthamax air filter with 360-degree conical style and is made of two distinct layers of specifically designed synthetic materials for exceptionally high filtration; Dry element; Washable and reusable; Its mandrel-bent powdercoated stainless steel intake tube moves the air inlet to a better location optimizing air flow at the drop of the throttle; Made in USA.

Fits the following 1996-2004 Chevrolet S10 submodels:

• 2001-2004: ZR5; 6 Cyl 4.3L;
• 1996-2004: LS; 6 Cyl 4.3L;

• 1999-2003: Xtreme; 6 Cyl 4.3L;

• 1996-2003: Base; 6 Cyl 4.3L;

• 1996-2003: ZR2; 6 Cyl 4.3L;

• 1996-1998: SS; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info

AIRAID COLD AIR DAM INTAKE SYSTEM

Airaid's Cold Air Dam intake system is designed to produce optimum performance by isolating engine heat away from air intake. It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing. Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Without tube

Features

• Washable and reusable air filter
• Made in U.S.A.

Notes

• Without intake tube
• Product legal for sale in California under Executive Order (EO) number D-609-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Fits the following 1996-2004 Chevrolet S10 submodels:

• 2001-2004: ZR5; 6 Cyl 4.3L;
• 1996-2004: LS; 6 Cyl 4.3L;

• 1999-2003: Xtreme; 6 Cyl 4.3L;

• 1996-2003: Base; 6 Cyl 4.3L;

• 1996-2003: ZR2; 6 Cyl 4.3L;

• 1996-1998: SS; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info

AIRAID QUICKFIT INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; Provides additional power from 6 h.p. to 18 h.p.; Increases airflow between 20 percent and 200 percent; 99 percent filtration efficiency rate; Includes air filter, heat shield and all the parts necessary for easy installation; Without intake tube; Specifically designed to get more out of an engine using the vehicle's stock cold-air inlet and filter housing and augment it with a washable and reusable Airaid Synthamax air filter that is made of two distinct layers of specifically designed synthetic materials for exceptionally high filtration; Dry element; Designed with a powdercoated heat shield setup for an aggressive improvement; Features an exclusive design that feeds air directly into the intake system and isolates hot air from the filter for a denser charge; Its bolt-on system mounts to the stock lower box using OE mounting clips and clamps for easy installation and eliminates the restrictive air box lid and paper filter; Made in USA.

Fits the following 1996-2004 Chevrolet S10 submodels:

• 2001-2004: ZR5; 6 Cyl 4.3L;
• 1996-2004: LS; 6 Cyl 4.3L;

• 1999-2003: Xtreme; 6 Cyl 4.3L;

• 1996-2003: Base; 6 Cyl 4.3L;

• 1996-2003: ZR2; 6 Cyl 4.3L;

• 1996-1998: SS; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info

AEM BRUTE FORCE AIR INDUCTION SYSTEM

AEM's Brute Force Air Induction System is dyno-tuned to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.

Specifications

• Synthetic filter material
• Dry filter element
• With heat shield
• Silver tube finish
• T-6063 aluminum tube material

Features

• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-392-21. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Fits the following 1996-2004 Chevrolet S10 submodels:

• 2001-2004: ZR5; 6 Cyl 4.3L;
• 1996-2004: LS; 6 Cyl 4.3L;

• 1999-2003: Xtreme; 6 Cyl 4.3L;

• 1996-2003: Base; 6 Cyl 4.3L;

• 1996-2003: ZR2; 6 Cyl 4.3L;

• 1996-1998: SS; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info

AEM BRUTE FORCE AIR INDUCTION SYSTEM

AEM's Brute Force Air Induction System is dyno-tuned to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Polished tube finish
• T-6063 aluminum tube material

Features

• Up to 99.52% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-670-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Fits the following 1996-2004 Chevrolet S10 submodels:

• 2001-2004: ZR5; 6 Cyl 4.3L;
• 1996-2004: LS; 6 Cyl 4.3L;

• 1999-2003: Xtreme; 6 Cyl 4.3L;

• 1996-2003: Base; 6 Cyl 4.3L;

• 1996-2003: ZR2; 6 Cyl 4.3L;

• 1996-1998: SS; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info