Chevy Tahoe Car Bra

LEBRA CUSTOM FRONT END COVER, VINYL, BLACK

The easiest way to protect your vehicle from unexpected road damage. These LeBra custom front end covers have stylish protection that makes your vehicle look great.

Features:

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
• Easy installation with no tools required
• All parts are pre-attached

Fits the following 2007-2012 Chevrolet Tahoe submodels:

• 2007-2012: LS; All Engines;
• 2007-2012: LT; All Engines;

• 2007-2012: LTZ; All Engines;

Fits 1 more submodels. (Show all) Show less info

LEBRA CUSTOM HOOD PROTECTOR, VINYL, BLACK

The stylish and affordable way to protect your vehicle's hood from common road hazards such as rock chips, bugs, and tar.

Features:

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

Fits the following 1999-2006 Chevrolet Tahoe submodels:

• 2003-2006: Z71; All Engines;
• 1999-2006: Base; All Engines;

• 1999-2006: LS; All Engines;

• 1999-2006: LT; All Engines;

Fits 2 more submodels. (Show all) Show less info

LEBRA CUSTOM FRONT END COVER, VINYL, BLACK

The easiest way to protect your vehicle from unexpected road damage. These LeBra custom front end covers have stylish protection that makes your vehicle look great.

Features:

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
• Easy installation with no tools required
• All parts are pre-attached

Fits the following 2001-2006 Chevrolet Tahoe submodels:

• 2001-2006: Base; All Engines;
• 2001-2006: LS; All Engines;

• 2001-2006: LT; All Engines;

Fits 1 more submodels. (Show all) Show less info

LEBRA CUSTOM HOOD PROTECTOR, VINYL, BLACK

The stylish and affordable way to protect your vehicle's hood from common road hazards such as rock chips, bugs, and tar.

Features:

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

Fits the following 1995-1998 Chevrolet Tahoe submodels:

• 1995-1998: Base; All Engines;
• 1995-1998: LS; All Engines;

• 1995-1998: LT; All Engines;

Fits 1 more submodels. (Show all) Show less info

COVERCRAFT MN SERIES MINI-MASK HOOD PROTECTOR, VINYL, BLACK

Covercraft MN Series Mini-Mask hood protector offers an economical alternative to a full front mask. It is designed to protect the area of the hood that takes the most abuse.

Features:

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

Fits the following 2007-2008 Chevrolet Tahoe submodels:

• 2007-2008: All Submodels; All Engines;

COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE

Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.

Features:

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Fits the following 2007-2008 Chevrolet Tahoe submodels:

• 2008-2008: LS; 8 Cyl 4.8L;
• 2008-2008: LS; 8 Cyl 5.3L;

• 2008-2008: LT; 8 Cyl 5.3L;

• 2008-2008: LTZ; 8 Cyl 5.3L;

• 2007-2007: All Submodels; All Engines;

Fits 3 more submodels. (Show all) Show less info

COVERCRAFT MD SERIES DEFLECTOR-PROTECTOR HOOD SHIELD, VINYL, BLACK

Covercraft MD Series Deflector-Protector is a hood protector with a built-in bug deflector. Unlike hard plastic bug deflectors, Deflector-Protector can be removed in minutes and stored in your vehicle's trunk or behind the seat.

Features:

• Made of tough vinyl material that has a soft fleeced backing
• The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
• Custom-tailored to protect the front of the hood of most cars, vans, and pickups
• Can be used in any weather, including sun, snow or rain
• Easy no-drill installation

Fits the following 2001-2006 Chevrolet Tahoe submodels:

• 2001-2006: All Submodels; All Engines;

COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE

Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.

Features:

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Fits the following 2001-2006 Chevrolet Tahoe submodels:

• 2001-2006: All Submodels; All Engines;

COVERCRAFT MN SERIES MINI-MASK HOOD PROTECTOR, VINYL, BLACK

Covercraft MN Series Mini-Mask hood protector offers an economical alternative to a full front mask. It is designed to protect the area of the hood that takes the most abuse.

Features:

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

Fits the following 2001-2006 Chevrolet Tahoe submodels:

• 2001-2006: All Submodels; All Engines;

COVERCRAFT MD SERIES DEFLECTOR-PROTECTOR HOOD SHIELD, VINYL, BLACK

Covercraft MD Series Deflector-Protector is a hood protector with a built-in bug deflector. Unlike hard plastic bug deflectors, Deflector-Protector can be removed in minutes and stored in your vehicle's trunk or behind the seat.

Features:

• Made of tough vinyl material that has a soft fleeced backing
• The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
• Custom-tailored to protect the front of the hood of most cars, vans, and pickups
• Can be used in any weather, including sun, snow or rain
• Easy no-drill installation

Fits the following 1995-1999 Chevrolet Tahoe submodels:

• 1995-1999: All Submodels; All Engines;

COVERCRAFT MN SERIES MINI-MASK HOOD PROTECTOR, VINYL, BLACK

Covercraft MN Series Mini-Mask hood protector offers an economical alternative to a full front mask. It is designed to protect the area of the hood that takes the most abuse.

Features:

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

Fits the following 1995-1999 Chevrolet Tahoe submodels:

• 1995-1999: All Submodels; All Engines;

COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE

Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.

Features:

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Fits the following 1995-1999 Chevrolet Tahoe submodels:

• 1995-1999: All Submodels; All Engines;