Ford Bronco Ii Brake Pad

EBC ULTIMAX BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Replace your worn out brake pads with new EBC Ultimax Brake Pads. Manufactured according to OE specifications, these long lasting pads completely eliminate brake judder and reduce brake disc wear by up to 50 percent. It's common practice to replace stock discs when replacing pads, but with Ultimax, your discs can last two pad sets. This means that with EBC Ultimax Brake Pads, you get to enjoy big savings and high performance braking over a good period of time.

Features:

• Manufactured from a semi-metallic compound with aramid soft fibers
• With center slots and edge chamfers plus noise reduction shims on the reverse
• EBC red Brake-In surface coating conditions rotors after installation allowing pads to quickly deliver their stopping power
• Hardware and wear leads included where fitted as standard by factory
• Long lasting high friction pad designed for non-sport urban driving on all sedans, SUVs, and light trucks

Install these brake pads with the help of EBC's Instructional Video P/N E35DVD083 (sold separately).

Fits the following 1987-1990 Ford Bronco II submodels:

• 1989-1990: XLT Plus; 6 Cyl 2.9L;
• 1988-1990: XL Sport; 6 Cyl 2.9L;

• 1987-1990: Eddie Bauer; 6 Cyl 2.9L;

• 1987-1990: XL; 6 Cyl 2.9L;

• 1987-1990: XLT; 6 Cyl 2.9L;

Fits 3 more submodels. (Show all) Show less info

EBC GREENSTUFF 6000 SERIES BRAKE PADS, ORGANIC, 2-WHEEL SET

For SUVs and light trucks that see occasional offroading, choose EBC Greenstuff 6000 Brake Pads. These pads offer up to 15 percent increase in stopping power over stock pads and resist dust and sand brought about by trekking, making your braking system more reliable for tackling rough roads and going up and down slopes.

Features:

• GG rated friction for better stopping
• Reduces rotor wear
• Painted with EBC's Brake-In coating for fast break-in and high initial brake effect
• Shimmed, chamfered, and slotted construction for silent running

Install these brake pads with the help of EBC's Instructional Video P/N E35DVD083 (sold separately).

Fits the following 1987-1990 Ford Bronco II submodels:

• 1989-1990: XLT Plus; 6 Cyl 2.9L;
• 1988-1990: XL Sport; 6 Cyl 2.9L;

• 1987-1990: Eddie Bauer; 6 Cyl 2.9L;

• 1987-1990: XL; 6 Cyl 2.9L;

• 1987-1990: XLT; 6 Cyl 2.9L;

Fits 3 more submodels. (Show all) Show less info

CENTRIC POSI QUIET EXTENDED WEAR SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Extended Wear Semi-Metallic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance, even at high temperatures
• Low rotor wear
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

Fits the following 1984-1990 Ford Bronco II submodels:

• 1984-1990: All Submodels; All Engines;

CENTRIC PREMIUM SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Premium Semi-Metallic Brake Pads with shims are manufactured using the same positive molding process used by leading automotive manufacturers. Centric Premium Semi-Metallic Brake Pads with shims provide superior stopping power with minimal dusting and noise. These brake pads are formulated for increased service life while maintaining high friction levels at all operating temperatures.

Features:

• High friction level at all temperatures
• 100% shimmed
• Stable friction performance across wide temperature range
• Positive Mold technology
• 100% asbestos and copper free compounds
• Precision cut backing plates
• High anti dust capability
• Application specific OE style shims

Item Details:

• Includes shims

Fits the following 1984-1990 Ford Bronco II submodels:

• 1984-1990: All Submodels; All Engines;

CENTRIC C-TEK STANDARD SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Restore the performance of your braking system with Centric C-Tek Standard Brake Pads. These high quality OE replacements ensure safe and consistent stopping ability so that you can enjoy your daily drive without worry. Centric C-Tek Standard Brake Pads offer exceptional stopping power and are available for most import and domestic vehicles.

Features:

• 100% asbestos and copper free formulas
• Special semi-metallic friction compounds
• Shimmed to eliminate noise and vibration
• Formulated for reduced noise
• Offers excellent pad and rotor life with minimal brake dust

Item Details:

• Includes shims

Fits the following 1984-1990 Ford Bronco II submodels:

• 1984-1990: All Submodels; All Engines;

CENTRIC POSI QUIET CERAMIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Ceramic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

Fits the following 1984-1990 Ford Bronco II submodels:

• 1984-1990: All Submodels; All Engines;

CENTRIC POSI QUIET SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Semi-Metallic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos and copper free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

Fits the following 1984-1990 Ford Bronco II submodels:

• 1984-1990: All Submodels; All Engines;

CENTRIC C-TEK STANDARD SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Restore the performance of your braking system with Centric C-Tek Standard Brake Pads. These high quality OE replacements ensure safe and consistent stopping ability so that you can enjoy your daily drive without worry. Centric C-Tek Standard Brake Pads offer exceptional stopping power and are available for most import and domestic vehicles.

Features:

• 100% asbestos and copper free formulas
• Special semi-metallic friction compounds
• Shimmed to eliminate noise and vibration
• Formulated for reduced noise
• Offers excellent pad and rotor life with minimal brake dust

Item Details:

• Includes shims

Fits the following 1986 Ford Bronco II submodels:

• 1986-1986: All Submodels; All Engines;

AKEBONO PRO-ACT ULTRA-PREMIUM BRAKE PADS, CERAMIC, 2-WHEEL SET

Make your brakes feel like brand new with Akebono Pro-ACT Ultra-Premium Brake Pads, the ultimate upgrade for OE semi-metallic and organic brake pads. As the aftermarket's only OE-validated pads, Pro-ACT offers high-caliber braking performance, produces minimal dust so as to keep wheels clean, and exhibits incredible pad wear resistance so that you don't have to visit the repair shop for replacements for a long time. Moreover, they boast of a harmonically damped design and have chamfers, slots, and precision-fit steel backing plates to maximize control over noise, vibration, and harshness (NVH). On top of all these, front Pro-ACT Pads are post-cured and heat-scorched to maximize initial braking effectiveness - no break-in required!

Features:

• Asbestos-free
• Low-dust and long-wearing vehicle-optimized formulation
• Harmonically damped, chamfered, slotted, and shimmed for NVH control
• Causes only minimal rotor wear to prolong rotor life
• Backing plates are powdercoated black for corrosion resistance
• Includes high-temperature resistant moly lube

Fits the following 1988-1990 Ford Bronco II submodels:

• 1988-1990: All Submodels; All Engines;

Akebono Pro-ACT Ultra-Premium Brake Pads

Akebono Pro-ACT Ultra-Premium brake pads utilize the aftermarket’s only OE-validated, application-specific friction formulations. This guarantees that Pro-ACT Ultra-Premium brake pads provide the ultimate braking experience to brand new performance levels or even better.

Engineered to eliminate noise, vibration and harshness (NVH), Pro-ACT Ceramic Disc Brake Pads provide the ultimate braking experience. Pro-ACT Ceramic Disc Pads are ideal for restoring OE ceramic pad performance, and for upgrading from conventional pads.

In addition to dramatically quieter braking, Pro-ACT Ceramic Pads provide best-in-class braking performance, including enhanced initial effectiveness (no break-in required), high resistance to fade, consistent brake pedal feel and ultra-low dusting for cleaner wheels and tires. Ceramic technology also causes minimal wear on brake rotors.

• Increased stopping power in critical braking situations
• Harmonically damped design for maximum control of NVH
• Vehicle specific optimized ceramic formulas for superior performance
• Post cured and heat scorched to ensure the highest initial effectiveness requiring no break-in procedures (exclusive to front formulations)
• Rotor-friendly pad formulations prevent uneven rotor wearing and pulsation complaints
• Precision-fit steel backing plates lead the industry in reducing vibration induced noise
• 100% chamfered and slotted to further enhance NVH control
• High resistance to fade with fast recovery
• Precision-fit shims aid in noise abatement and prevent shim migration
• Black powder coat finish provides OE-level corrosion resistance
• 100% asbestos-free formulations
• High-temperature resistant moly lube included in all boxes

Akebono’s Aftermarket disc pads contain the same materials, engineering, quality standards, and advanced technologies used to create their OE ceramic brake pads.

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Pro-ACT Ceramic w/Shims

Fits the following 1984-1990 Ford Bronco II submodels:

• 1989-1990: XLT Plus; 6 Cyl 2.9L;
• 1988-1990: XL Sport; 6 Cyl 2.9L;

• 1987-1990: XL; 6 Cyl 2.9L;

• 1986-1990: Eddie Bauer; 6 Cyl 2.9L;

• 1986-1990: XLT; 6 Cyl 2.9L;

• 1986-1986: Base; 6 Cyl 2.9L;

• 1985-1985: Base; 6 Cyl 2.8L;

• 1985-1985: Eddie Bauer; 6 Cyl 2.8L;

• 1985-1985: XLS; 6 Cyl 2.8L;

• 1985-1985: XLT; 6 Cyl 2.8L;

• 1984-1984: All Submodels; All Engines;

Fits 9 more submodels. (Show all) Show less info

HAWK PERFORMANCE LTS BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Hawk Performance LTS brake pads are designed to deliver enhanced braking performance over OE pads on large brake systems used by import and domestic full-size trucks, vans, and half-ton SUVs used for moderate hauling and towing.

Specifications:

• 0.59 in. thickness

Features:

• Asbestos-free
• Low-dust and long-wear ferro-carbon formulation
• Greater stopping power and fade resistance
• Virtually silent
• Prolongs rotor life

Fits the following 1984-1990 Ford Bronco II submodels:

• 1984-1990: All Submodels; All Engines;

BENDIX CT-3 BRAKE PADS, CERAMIC, 2-WHEEL SET

Experience ultra-quiet braking with Bendix CT-3 aftermarket brake pads. Made especially for medium and heavy duty vehicles, these pads feature a distinct and premium blend of friction raw materials that drastically reduces brake noise and minimizes brake dust for cleaner wheels. Noise abatement is further augmented by features such as thermally bonded insulator shims, angled chamfers, and/or slots. To protect against edge lift, most models have their friction material bonded to steel using advanced mechanical attachments. Whether installed in SUVs, pickups trucks, or even sedans, you can expect nothing less than superior long-term performance from Bendix CT-3 brake pads.

Features:

• Asbestos-free
• Low dust and low noise formulation
• Integrally molded
• Chamfered
• Slotted

This brake pad set comes with shims and pad lubricant.

Fits the following 1984-1990 Ford Bronco II submodels:

• 1989-1990: XLT Plus; 6 Cyl 2.9L;
• 1988-1990: XL Sport; 6 Cyl 2.9L;

• 1987-1990: Eddie Bauer; 6 Cyl 2.9L;

• 1987-1990: XL; 6 Cyl 2.9L;

• 1987-1990: XLT; 6 Cyl 2.9L;

• 1984-1985: Base; 6 Cyl 2.8L;

• 1984-1985: Eddie Bauer; 6 Cyl 2.8L;

• 1984-1985: XLS; 6 Cyl 2.8L;

• 1984-1985: XLT; 6 Cyl 2.8L;

Fits 7 more submodels. (Show all) Show less info

BENDIX GLOBAL BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Bendix brake pads offer unsurpassed quality for various kinds of vehicles.

Features:

• Asbestos-free
• Semi-metallic material provides strength and conducts heat away from the brake disc
• Designed for optimum performance across a wide variety of operating conditions

Fits the following 1984-1990 Ford Bronco II submodels:

• 1989-1990: XLT Plus; 6 Cyl 2.9L; "VIN T"
• 1988-1990: XL Sport; 6 Cyl 2.9L; "VIN T"

• 1987-1990: Eddie Bauer; 6 Cyl 2.9L; "VIN T"

• 1987-1990: XL; 6 Cyl 2.9L; "VIN T"

• 1987-1990: XLT; 6 Cyl 2.9L; "VIN T"

• 1984-1985: Base; 6 Cyl 2.8L; "VIN S"

• 1984-1985: Eddie Bauer; 6 Cyl 2.8L; "VIN S"

• 1984-1985: XLS; 6 Cyl 2.8L; "VIN S"

• 1984-1985: XLT; 6 Cyl 2.8L; "VIN S"

Fits 7 more submodels. (Show all) Show less info

BENDIX TITANIUMETALLIC II BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Enjoy unmatched braking performance right out of the box with TitaniuMetallic II brake pads. These boast a completely reformulated TitaniuMetallic II blue coating that cuts down the required break-in period from 200 stops to just 50 stops, assuring greater stopping power sooner. They also have an all-new semi-metallic pad formulation that provides shorter stopping distances with less pedal effort. Additionally, these have noise-reducing shims and match OE pads in terms of design (chamfered and/or slotted), configuration (riveted and/or integrally-molded) and included components (attaching hardware and/or wear sensors).

Features:

• Asbestos-free
• Semi-metallic formulation provides superior braking performance
• TitaniuMetallic II coating shortens the break-in period
• Greater stopping power from the very first stop

Fits the following 1984-1990 Ford Bronco II submodels:

• 1989-1990: XLT Plus; 6 Cyl 2.9L;
• 1988-1990: XL Sport; 6 Cyl 2.9L;

• 1987-1990: Eddie Bauer; 6 Cyl 2.9L;

• 1987-1990: XL; 6 Cyl 2.9L;

• 1987-1990: XLT; 6 Cyl 2.9L;

• 1984-1985: Base; 6 Cyl 2.8L;

• 1984-1985: Eddie Bauer; 6 Cyl 2.8L;

• 1984-1985: XLS; 6 Cyl 2.8L;

• 1984-1985: XLT; 6 Cyl 2.8L;

Fits 7 more submodels. (Show all) Show less info

BENDIX GLOBAL BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Bendix brake pads offer unsurpassed quality for various kinds of vehicles.

Features:

• Asbestos-free
• Semi-metallic material provides strength and conducts heat away from the brake disc
• Designed for optimum performance across a wide variety of operating conditions

Fits the following 1986-1987 Ford Bronco II submodels:

• 1987-1987: XL; 6 Cyl 2.9L; "VIN T"
• 1986-1987: Eddie Bauer; 6 Cyl 2.9L; "VIN T"

• 1986-1987: XLT; 6 Cyl 2.9L; "VIN T"

• 1986-1986: Base; 6 Cyl 2.9L; "VIN T"

Fits 2 more submodels. (Show all) Show less info