Ford Bronco Intakes

K&N 57 SERIES GENERATION II FIPK COLD AIR INTAKE SYSTEM -- Provides Additional Power Up To 10.22 hp At 4201 RPM, 96%-99% Filtration Efficiency Rate, It Significantly Reduces Intake Restriction As It Smoothens And Straightens Air Flow, This Allows The Vehicle's Engine To Inhale A Large Volume Of Air Than OEM Air Filter Assembly For More Usable Power And Acceleration Throughout The RPM Range, C.A.R.B. Certified, Street Legal In All 50 US States, Comes With A Washable And Reusable Filter, Heat Shield Included, Easy Installation, With K&N's Limited Million Mile Warranty

Fits the following 1994-1996 Ford Bronco submodels:

• 1994-1996: Eddie Bauer; 8 Cyl 5.0L;
• 1994-1996: XL; 8 Cyl 5.0L;

• 1994-1996: XLT; 8 Cyl 5.0L;

• 1995-1996: Eddie Bauer; 8 Cyl 5.8L;

• 1995-1996: XL; 8 Cyl 5.8L;

• 1995-1996: XLT Sport; 8 Cyl 5.0L;

• 1995-1996: XLT Sport; 8 Cyl 5.8L;

• 1995-1996: XLT; 8 Cyl 5.8L;

Fits 6 more submodels. (Show all) Show less info

K&N 57 SERIES GENERATION II FIPK COLD AIR INTAKE SYSTEM -- Provides additional power up to 9.33 h.p. at 3696 RPM; 96 to 99 percent filtration efficiency; Includes black roto molded intake tube, red air filter, heat shield, and all the necessary hardware for installation; Fuel injection performance kit; Features high density polyethylene intake tube that is custom engineered and aerodynamically designed to drive air into your engine; Its washable and reusable air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow; Comes with a heat shield that is custom designed to isolate and provide cooler air; Virtually eliminates intake tract restriction by replacing the air filter and the entire air path to the engine; Can go up to 100,000 miles between cleanings depending on driving conditions; C.A.R.B. exempted with E.O. number D-269-28, street legal in all 50 US states; Easy to install; With K&N's limited million mile warranty.

Fits the following 1988-1995 Ford Bronco submodels:

• 1988-1993: Custom; 8 Cyl 5.0L;
• 1988-1993: Custom; 8 Cyl 5.8L;

• 1988-1995: Eddie Bauer; 8 Cyl 5.0L;

• 1988-1995: Eddie Bauer; 8 Cyl 5.8L;

• 1988-1995: XLT; 8 Cyl 5.0L;

• 1988-1995: XLT; 8 Cyl 5.8L;

• 1990-1995: XL; 8 Cyl 5.0L;

• 1990-1995: XL; 8 Cyl 5.8L;

• 1992-1992: XLT Nite; 8 Cyl 5.0L;

• 1992-1992: XLT Nite; 8 Cyl 5.8L;

• 1993-1993: XLT Lariat; 8 Cyl 5.0L;

• 1993-1993: XLT Lariat; 8 Cyl 5.8L;

• 1995-1995: XLT Sport; 8 Cyl 5.0L;

• 1995-1995: XLT Sport; 8 Cyl 5.8L;

Fits 12 more submodels. (Show all) Show less info

K&N 57 SERIES GENERATION I FIPK COLD AIR INTAKE SYSTEM -- Provides additional power up to 5.33 h.p. at 3654 RPM; 96 to 99 percent filtration efficiency; Includes red air filter with adapter; Fuel injection performance kit; Its washable and reusable air filter is made of 4-6 layers cotton gauze; Creates a radius entry that allows the engine to ingest a greater volume compared to the factory intake system for more usable power and acceleration throughout the RPM range; Significantly reduces intake restriction as it smoothens and straightens air flow; Can go up to 100,000 miles between cleanings depending on driving conditions; C.A.R.B. certified with E.O. number D-269-17, street legal in all 50 US states; Easy to install; With K&N's limited million mile warranty.

Fits the following 1988-1995 Ford Bronco submodels:

• 1988-1992: Custom; 6 Cyl 4.9L;
• 1988-1992: Eddie Bauer; 6 Cyl 4.9L;

• 1988-1992: XLT; 6 Cyl 4.9L;

• 1988-1993: Custom; 8 Cyl 5.0L;

• 1988-1993: Custom; 8 Cyl 5.8L;

• 1988-1995: Eddie Bauer; 8 Cyl 5.0L;

• 1988-1995: Eddie Bauer; 8 Cyl 5.8L;

• 1988-1995: XLT; 8 Cyl 5.0L;

• 1988-1995: XLT; 8 Cyl 5.8L;

• 1990-1992: XL; 6 Cyl 4.9L;

• 1990-1995: XL; 8 Cyl 5.0L;

• 1990-1995: XL; 8 Cyl 5.8L;

• 1992-1992: XLT Nite; 6 Cyl 4.9L;

• 1992-1992: XLT Nite; 8 Cyl 5.0L;

• 1992-1992: XLT Nite; 8 Cyl 5.8L;

• 1993-1993: XLT Lariat; 8 Cyl 5.0L;

• 1993-1993: XLT Lariat; 8 Cyl 5.8L;

• 1995-1995: XLT Sport; 8 Cyl 5.0L;

• 1995-1995: XLT Sport; 8 Cyl 5.8L;

Fits 17 more submodels. (Show all) Show less info

K&N 57 SERIES FIPK COLD AIR INTAKE, GENERATION I -- Replaces The Entire Air Intake Tract And Filter, Produces An Additional Horsepower, Increases Fuel Mileage, Comes With Uniquely Designed Adapters And A Washable And Reusable Filter That Lasts Longer, Easy Installation, Street Legal In All 50 US States, With Manufacturer's Million Mile Warranty

Fits the following 1994-1996 Ford Bronco submodels:

• 1994-1996: Eddie Bauer; 8 Cyl 5.0L;
• 1994-1996: XL; 8 Cyl 5.0L;

• 1994-1996: XLT; 8 Cyl 5.0L;

• 1995-1996: Eddie Bauer; 8 Cyl 5.8L;

• 1995-1996: XL; 8 Cyl 5.8L;

• 1995-1996: XLT Sport; 8 Cyl 5.0L;

• 1995-1996: XLT Sport; 8 Cyl 5.8L;

• 1995-1996: XLT; 8 Cyl 5.8L;

Fits 6 more submodels. (Show all) Show less info

K&N 63 SERIES AIRCHARGER COLD AIR INTAKE KIT -- Provides Additional Power Up To 9.45 h.p. At 3787 RPM, 96%-99% Filtration Efficiency Rate, This Aircharger Kit Represents A Significant Improvement Over A K&N OE Replacement Filter Alone, It Features A Non-Metallic Rotationally Molded Tubes That Can Reduce Intake Air Temperature And Decrease Intake Sound Over A Metal Tube, Street Legal In Most States But Not Legal In California, Comes With A Washable And Reusable Filter That Lasts Longer, With K&N's Limited Million Mile Warranty

Fits the following 1996 Ford Bronco submodels:

• 1996-1996: Eddie Bauer; 8 Cyl 5.0L;
• 1996-1996: Eddie Bauer; 8 Cyl 5.8L;

• 1996-1996: XL; 8 Cyl 5.0L;

• 1996-1996: XL; 8 Cyl 5.8L;

• 1996-1996: XLT Sport; 8 Cyl 5.0L;

• 1996-1996: XLT Sport; 8 Cyl 5.8L;

• 1996-1996: XLT; 8 Cyl 5.0L;

• 1996-1996: XLT; 8 Cyl 5.8L;

Fits 6 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Lower Set, Upper Set Included, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1987-1992 Ford Bronco submodels:

• 1987-1992: Custom; 6 Cyl 4.9L; "GAS, FI, VIN Y"
• 1987-1992: Eddie Bauer; 6 Cyl 4.9L; "GAS, FI, VIN Y"

• 1987-1992: XLT; 6 Cyl 4.9L; "GAS, FI, VIN Y"

• 1990-1992: XL; 6 Cyl 4.9L; "GAS, FI, VIN Y"

• 1992-1992: XLT Nite; 6 Cyl 4.9L; "GAS, FI, VIN Y"

Fits 3 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1966-1976 Ford Bronco submodels:

• 1966-1967: Base; 8 Cyl 4.7L; "GAS, CARB"
• 1968-1968: Base; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1968: Roadster; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1968: Wagon; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1973: Wagon; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1969-1969: Roadster; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1969-1974: Base; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1975: Northland; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1975: Ranger; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1976: Custom; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1976: Sport; 8 Cyl 5.0L; "GAS, CARB, VIN G"

Fits 9 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.

Fits the following 1977-1987 Ford Bronco submodels:

• 1977-1977: Custom; 8 Cyl 5.0L; "GAS, CARB, VIN G"
• 1977-1977: Sport; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1978-1978: Northland; 8 Cyl 5.8L; "GAS, CARB, VIN H"

• 1978-1979: Ranger XLT; 8 Cyl 5.8L; "GAS, CARB, VIN H"

• 1978-1987: Custom; 8 Cyl 5.8L; "GAS, CARB, VIN H"

• 1980-1981: Ranger XLT; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1980-1981: Ranger XLT; 8 Cyl 5.8L; "GAS, CARB, VIN G"

• 1980-1984: Custom; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1980-1985: Custom; 8 Cyl 5.8L; "GAS, CARB, VIN G"

• 1982-1983: XLS; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1982-1983: XLS; 8 Cyl 5.8L; "GAS, CARB, VIN G"

• 1982-1983: XLT Lariat; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1982-1983: XLT Lariat; 8 Cyl 5.8L; "GAS, CARB, VIN G"

• 1984-1984: XLT; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1984-1985: XLT; 8 Cyl 5.8L; "GAS, CARB, VIN G"

• 1984-1987: XLT; 8 Cyl 5.8L; "GAS, CARB, VIN H"

• 1985-1985: Eddie Bauer; 8 Cyl 5.8L; "GAS, CARB, VIN G"

• 1985-1987: Eddie Bauer; 8 Cyl 5.8L; "GAS, CARB, VIN H"

Fits 16 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Lower Set, Upper Set Included, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1985-1996 Ford Bronco submodels:

• 1985-1993: Custom; 8 Cyl 5.0L; "GAS, FI, VIN N"
• 1985-1996: Eddie Bauer; 8 Cyl 5.0L; "GAS, FI, VIN N"

• 1985-1996: XLT; 8 Cyl 5.0L; "GAS, FI, VIN N"

• 1990-1996: XL; 8 Cyl 5.0L; "GAS, FI, VIN N"

• 1992-1992: XLT Nite; 8 Cyl 5.0L; "GAS, FI, VIN N"

• 1993-1993: XLT Lariat; 8 Cyl 5.0L; "GAS, FI, VIN N"

• 1995-1996: XLT Sport; 8 Cyl 5.0L; "GAS, FI, VIN N"

Fits 5 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.

Fits the following 1988-1996 Ford Bronco submodels:

• 1988-1993: Custom; 8 Cyl 5.8L; "GAS, FI, VIN H"
• 1988-1996: Eddie Bauer; 8 Cyl 5.8L; "GAS, FI, VIN H"

• 1988-1996: XLT; 8 Cyl 5.8L; "GAS, FI, VIN H"

• 1990-1996: XL; 8 Cyl 5.8L; "GAS, FI, VIN H"

• 1992-1992: XLT Nite; 8 Cyl 5.8L; "GAS, FI, VIN H"

• 1993-1993: XLT Lariat; 8 Cyl 5.8L; "GAS, FI, VIN H"

• 1995-1996: XLT Sport; 8 Cyl 5.8L; "GAS, FI, VIN H"

Fits 5 more submodels. (Show all) Show less info

Performer RPM 302, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Air-Gap 302, Cast Finish, Recommend FelPro Gasket PN[1250] For Manifold Gasket

Fits the following 1966-1984 Ford Bronco submodels:

• 1966-1967: Base; 8 Cyl 4.7L; "GAS, CARB"
• 1968-1968: Base; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1968: Roadster; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1968: Wagon; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1973: Wagon; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1969-1969: Roadster; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1969-1974: Base; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1975: Northland; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1975: Ranger; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1977: Custom; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1977: Sport; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1980-1981: Ranger XLT; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1980-1984: Custom; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1982-1983: XLS; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1982-1983: XLT Lariat; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1984-1984: XLT; 8 Cyl 5.0L; "GAS, CARB, VIN F"

Fits 14 more submodels. (Show all) Show less info

RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Cast Finish, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Recommend FelPro Gasket PN[1250] for Manifold Gasket

Fits the following 1966-1984 Ford Bronco submodels:

• 1966-1967: Base; 8 Cyl 4.7L; "GAS, CARB"
• 1968-1968: Base; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1968: Roadster; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1968: Wagon; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1973: Wagon; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1969-1969: Roadster; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1969-1974: Base; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1975: Northland; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1975: Ranger; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1977: Custom; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1977: Sport; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1980-1981: Ranger XLT; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1980-1984: Custom; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1982-1983: XLS; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1982-1983: XLT Lariat; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1984-1984: XLT; 8 Cyl 5.0L; "GAS, CARB, VIN F"

Fits 14 more submodels. (Show all) Show less info

Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Street Legal, Cast Finish, Recommend FelPro Gasket Part # 1250 for Manifold Gasket

Fits the following 1966-1984 Ford Bronco submodels:

• 1966-1967: Base; 8 Cyl 4.7L; "GAS, CARB"
• 1968-1968: Base; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1968: Roadster; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1968: Wagon; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1973: Wagon; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1969-1969: Roadster; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1969-1974: Base; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1975: Northland; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1975: Ranger; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1977: Custom; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1977: Sport; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1980-1981: Ranger XLT; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1980-1984: Custom; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1982-1983: XLS; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1982-1983: XLT Lariat; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1984-1984: XLT; 8 Cyl 5.0L; "GAS, CARB, VIN F"

Fits 14 more submodels. (Show all) Show less info

Performer RPM 302, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Air-Gap 302, Polished Finish, Recommend FelPro Gasket PN[1250] For Manifold Gasket

Fits the following 1966-1984 Ford Bronco submodels:

• 1966-1967: Base; 8 Cyl 4.7L; "GAS, CARB"
• 1968-1968: Base; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1968: Roadster; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1968: Wagon; 8 Cyl 4.7L; "GAS, CARB, VIN N"

• 1968-1973: Wagon; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1969-1969: Roadster; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1969-1974: Base; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1975: Northland; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1975: Ranger; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1977: Custom; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1975-1977: Sport; 8 Cyl 5.0L; "GAS, CARB, VIN G"

• 1980-1981: Ranger XLT; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1980-1984: Custom; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1982-1983: XLS; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1982-1983: XLT Lariat; 8 Cyl 5.0L; "GAS, CARB, VIN F"

• 1984-1984: XLT; 8 Cyl 5.0L; "GAS, CARB, VIN F"

Fits 14 more submodels. (Show all) Show less info

RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, PermaStar Coated, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Recommend FelPro Gasket PN[1250] for Manifold Gasket

Fits the following 1966-1996 Ford Bronco submodels:

• 1966-1967: Base; 8 Cyl 4.7L; "GAS"
• 1968-1968: Base; 8 Cyl 4.7L; "GAS, VIN N"

• 1968-1968: Roadster; 8 Cyl 4.7L; "GAS, VIN N"

• 1968-1968: Wagon; 8 Cyl 4.7L; "GAS, VIN N"

• 1968-1973: Wagon; 8 Cyl 5.0L; "GAS, VIN G"

• 1969-1969: Roadster; 8 Cyl 5.0L; "GAS, VIN G"

• 1969-1974: Base; 8 Cyl 5.0L; "GAS, VIN G"

• 1975-1975: Northland; 8 Cyl 5.0L; "GAS, VIN G"

• 1975-1975: Ranger; 8 Cyl 5.0L; "GAS, VIN G"

• 1975-1977: Custom; 8 Cyl 5.0L; "GAS, VIN G"

• 1975-1977: Sport; 8 Cyl 5.0L; "GAS, VIN G"

• 1980-1981: Ranger XLT; 8 Cyl 5.0L; "GAS, VIN F"

• 1980-1984: Custom; 8 Cyl 5.0L; "GAS, VIN F"

• 1982-1983: XLS; 8 Cyl 5.0L; "GAS, VIN F"

• 1982-1983: XLT Lariat; 8 Cyl 5.0L; "GAS, VIN F"

• 1984-1984: XLT; 8 Cyl 5.0L; "GAS, VIN F"

• 1994-1996: Eddie Bauer; 8 Cyl 5.0L; "GAS, VIN N"

• 1994-1996: XL; 8 Cyl 5.0L; "GAS, VIN N"

• 1994-1996: XLT; 8 Cyl 5.0L; "GAS, VIN N"

• 1995-1996: XLT Sport; 8 Cyl 5.0L; "GAS, VIN N"

Fits 18 more submodels. (Show all) Show less info