Honda Crx Brake Pads

EBC REDSTUFF CERAMIC 3000 SERIES BRAKE PAD SET -- Made from high quality Kevlar fiber-based compound that is enhanced with ceramic particles; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; Strong resistant to fade under load and totally resistant to rotor vibration; Reduces dust by 60 to 90 percent and can be removed easily; Superb brake effect from cold up to race temperature; Engineered for highly tuned vehicles and best for high-speed spirited street driving; With EBC's limited 1-year or 10,000-mile warranty.

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI"

AKEBONO PROACT ULTRA-PREMIUM BRAKE PAD SET, CERAMIC -- Includes high-temperature resistant moly lube; Comes with precision-fit steel backing plates for less noise and precision-fit shims to avoid shim migration; Best replacement for restoring OE ceramic pad performance and ideal for upgrading conventional brakes; Made from carefully selected materials and rotor-friendly asbestos-free formulations that minimize or virtually eliminate dusting, brake squealing, groaning, and vibration; Has black powdercoat finish for OE-level corrosion resistance; 100 percent chamfered and slotted to further enhance NVH control; Offers improved pad wear performance compared to traditional brake pads; Post cured and heat scorched to ensure highest initial effectiveness requiring no break-in procedures but exclusive only for front formulations.

Fits the following 1990-1991 Honda CRX submodels:

• 1990-1991: Si; 4 Cyl 1.6L; "GAS, FI, D16A6"

AKEBONO PROACT ULTRA-PREMIUM BRAKE PAD SET, CERAMIC -- Includes high-temperature resistant moly lube; Comes with precision-fit steel backing plates for less noise and precision-fit shims to avoid shim migration; Best replacement for restoring OE ceramic pad performance and ideal for upgrading conventional brakes; Made from carefully selected materials and rotor-friendly asbestos-free formulations that minimize or virtually eliminate dusting, brake squealing, groaning, and vibration; Has black powdercoat finish for OE-level corrosion resistance; 100 percent chamfered and slotted to further enhance NVH control; Offers improved pad wear performance compared to traditional brake pads; Post cured and heat scorched to ensure highest initial effectiveness requiring no break-in procedures but exclusive only for front formulations.

Fits the following 1989-1990 Honda CRX submodels:

• 1989-1990: Base; 4 Cyl 1.5L; "GAS, FI, D15B2"

Pro-ACT Ceramic w/Shims

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1988: DX; All Engines;
• 1988-1989: Si; All Engines;

• 1989-1991: Base; All Engines;

Fits 1 more submodels. (Show all) Show less info

AKEBONO PREMIUM BRAKE PAD SET, CERAMIC -- Comes with precision-fit steel backing plate for precise caliper fit; Made with vehicle-optimized ceramic formulations to generate less wheel dust and to provide further comfort through the control of noise, vibration, and harshness; Chamfered and slotted as per OE specifications.

Fits the following 1989-1990 Honda CRX submodels:

• 1989-1990: Base; 4 Cyl 1.5L; "GAS, FI, D15B2"

ACT Ceramic w/ Shims

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1988: DX; All Engines;
• 1988-1989: Si; All Engines;

• 1989-1991: Base; All Engines;

Fits 1 more submodels. (Show all) Show less info

AKEBONO PREMIUM BRAKE PAD SET, CERAMIC -- Comes with precision-fit steel backing plate for precise caliper fit; Made with vehicle-optimized ceramic formulations to generate less wheel dust and to provide further comfort through the control of noise, vibration, and harshness; Chamfered and slotted as per OE specifications.

Fits the following 1990-1991 Honda CRX submodels:

• 1990-1991: Si; 4 Cyl 1.6L; "FI, D16A6"

Pro-ACT Ceramic w/Shims

Fits the following 1990-1991 Honda CRX submodels:

• 1990-1991: Si; All Engines;

ACT Ceramic w/ Shims

Fits the following 1990-1991 Honda CRX submodels:

• 1990-1991: Si; All Engines;

CENTRIC PREMIUM BRAKE PAD SET -- Provides superior stopping power with minimal dusting; Features shims to reduce brake noise and prevent high amount of vibration; With Centric's limited 90-day or 3,000-mile warranty.

Fits the following 1990-1991 Honda CRX submodels:

• 1990-1991: Si; 4 Cyl 1.6L; "FI, D16A6"

CENTRIC POSI QUIET EXTENDED WEAR BRAKE PAD SET -- Manufactured using the same positive molding process used by OE suppliers which assures consistent friction material density throughout the pad resulting in even wear and braking power; 100 percent asbestos free; Features precision cut or shaved backing plates with mechanically attached and application specific shims that provide superior noise abatement; Positively molded and scorched to enhance consistent friction performance across a wide temperature range; Excellent for fleet service and heavy duty applications; With Centric's limited 90-day or 3,000-mile warranty.

Fits the following 1988-1989 Honda CRX submodels:

• 1988-1989: Si; 4 Cyl 1.6L; "FI, D16A6"

CENTRIC POSI QUIET CERAMIC BRAKE PAD SET -- Manufactured using the same positive molding process used by OE suppliers which assures consistent friction material density throughout the pad resulting in even wear and braking power; 100 percent asbestos free; Features precision cut or shaved backing plates with mechanically attached and application specific shims that provide superior noise abatement; Positively molded and scorched to enhance consistent friction performance across a wide temperature range; With Centric's limited 90-day or 3,000-mile warranty.

Fits the following 1988-1989 Honda CRX submodels:

• 1988-1989: Si; 4 Cyl 1.6L; "FI, D16A6"

CENTRIC POSI QUIET CERAMIC BRAKE PAD SET -- Manufactured using the same positive molding process used by OE suppliers which assures consistent friction material density throughout the pad resulting in even wear and braking power; 100 percent asbestos free; Features precision cut or shaved backing plates with mechanically attached and application specific shims that provide superior noise abatement; Positively molded and scorched to enhance consistent friction performance across a wide temperature range; With Centric's limited 90-day or 3,000-mile warranty.

Fits the following 1990-1991 Honda CRX submodels:

• 1990-1991: Si; 4 Cyl 1.6L; "FI, D16A6"

CENTRIC NISSIN BRAKE PAD SET -- Manufactured in actual OEM supplier plants using OEM processes, materials and procedures; A high quality, direct fit OE replacement brake pad set; Distributed by Centric; With Centric's limited 90-day or 3,000-mile warranty.

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: HF; 4 Cyl 1.5L;

CENTRIC POSI QUIET EXTENDED WEAR BRAKE PAD SET -- Manufactured using the same positive molding process used by OE suppliers which assures consistent friction material density throughout the pad resulting in even wear and braking power; 100 percent asbestos free; Features precision cut or shaved backing plates with mechanically attached and application specific shims that provide superior noise abatement; Positively molded and scorched to enhance consistent friction performance across a wide temperature range; Excellent for fleet service and heavy duty applications; With Centric's limited 90-day or 3,000-mile warranty.

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: HF; 4 Cyl 1.5L;