Honda Crx Intakes

K&N 57 SERIES GENERATION I FIPK COLD AIR INTAKE SYSTEM -- Provides Additional Power Up To 4.39 h.p. At 5416 RPM, 96%-99% Filtration Efficiency Rate, It Creates A Radius Entry That Allows The Engine To Ingest A Greater Volume Compared To The Factory Intake System For More Usable Power And Acceleration Throughout The RPM Range, Significantly Reduces Intake Restriction As It Smoothens And Straightens Air Flow, C.A.R.B. Certified, Street Legal In All 50 US States, Comes With A Washable And Reusable Filter, Easy Installation, With K&N's Limited Million Mile Warranty

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1988: DX; 4 Cyl 1.5L;
• 1988-1991: Si; 4 Cyl 1.6L;

• 1989-1991: Base; 4 Cyl 1.5L;

Fits 1 more submodels. (Show all) Show less info

AEM HYBRID AIR INTAKE SYSTEM, POWDERCOATED TITANIUM LOOK -- Its Three-Inch Aircraft Aluminum Inlet Pipe Delivers Maximum Flow For High Output Motors, Not 50-State Legal, For Off-Road Use Only, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced Tig-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Guaranteed For Life Of The Vehicle By AEM

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1988: DX; 4 Cyl 1.5L; "GAS, FI, B18B"
• 1988-1988: DX; 4 Cyl 1.5L; "GAS, FI, B18C5"

• 1988-1988: DX; 4 Cyl 1.5L; "GAS, FI, D15B2"

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, B18B"

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, B18C5"

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, D16A6"

• 1988-1991: HF; 4 Cyl 1.5L; "GAS, FI, B18B"

• 1988-1991: HF; 4 Cyl 1.5L; "GAS, FI, B18C5"

• 1988-1991: HF; 4 Cyl 1.5L; "GAS, FI, D15B2"

• 1990-1991: Base; 4 Cyl 1.5L; "GAS, FI, B18B"

• 1990-1991: Base; 4 Cyl 1.5L; "GAS, FI, B18C5"

• 1990-1991: Base; 4 Cyl 1.5L; "GAS, FI, D15B6"

• 1990-1991: HF; 4 Cyl 1.5L; "GAS, FI, D15B6"

• 1991-1991: Base; 4 Cyl 1.5L; "GAS, FI, D15B2"

Fits 12 more submodels. (Show all) Show less info

AEM COLD AIR INDUCTION SYSTEM, POLISHED -- Engineered To Produce Significant Increases In Power By Locating The Air Filter Outside Of The Engine Compartment And By Tuning The Inlet Pipe In Length And Diameter To Match The Engine's Resonance, 50 State Legal, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced Tig-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Guaranteed For Life Of The Vehicle By AEM

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, D16A6"

AEM COLD AIR INDUCTION SYSTEM, POWDERCOATED RED -- Engineered To Produce Significant Increases In Power By Locating The Air Filter Outside Of The Engine Compartment And By Tuning The Inlet Pipe In Length And Diameter To Match The Engine's Resonance, 50 State Legal, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced Tig-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Guaranteed For Life Of The Vehicle By AEM

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, D16A6"

AEM COLD AIR INDUCTION SYSTEM, POWDERCOATED SILVER -- Engineered To Produce Significant Increases In Power By Locating The Air Filter Outside Of The Engine Compartment And By Tuning The Inlet Pipe In Length And Diameter To Match The Engine's Resonance, 50 State Legal, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced Tig-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Guaranteed For Life Of The Vehicle By AEM

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, D16A6"

AEM COLD AIR INDUCTION SYSTEM, POWDERCOATED BLUE -- Engineered To Produce Significant Increases In Power By Locating The Air Filter Outside Of The Engine Compartment And By Tuning The Inlet Pipe In Length And Diameter To Match The Engine's Resonance, 50 State Legal, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced Tig-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Guaranteed For Life Of The Vehicle By AEM

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, D16A6"

AEM HYBRID AIR INTAKE SYSTEM, POWDERCOATED TITANIUM LOOK -- Its Three-Inch Aircraft Aluminum Inlet Pipe Delivers Maximum Flow For High Output Motors, Not 50-State Legal, For Off-Road Use Only, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced Tig-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Guaranteed For Life Of The Vehicle By AEM

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1988: DX; 4 Cyl 1.5L; "GAS, FI, B18C1"
• 1988-1988: DX; 4 Cyl 1.5L; "GAS, FI, D15B2"

• 1988-1988: HF; 4 Cyl 1.5L; "GAS, FI, D15B2"

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, B18C1"

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, D16A6"

• 1988-1991: HF; 4 Cyl 1.5L; "GAS, FI, B18C1"

• 1990-1991: Base; 4 Cyl 1.5L; "GAS, FI, B18C1"

• 1990-1991: Base; 4 Cyl 1.5L; "GAS, FI, D15B6"

• 1990-1991: HF; 4 Cyl 1.5L; "GAS, FI, D15B6"

Fits 7 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, D16A6"
• 1989-1991: Base; 4 Cyl 1.5L; "GAS, FI, D15B2"

FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1989: HF; 4 Cyl 1.5L; "GAS, FI"
• 1990-1991: HF; 4 Cyl 1.5L; "GAS, FI, D15B6"

AEM SHORT RAM INDUCTION SYSTEM, POWDERCOATED RED -- Engineered To Produce Significant Increases In Power By Locating The Air Filter In The Coolest Location Possible Of The Engine Compartment, 50 State Legal, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced Tig-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Guaranteed For Life Of The Vehicle By AEM

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, D16A6"

AEM SHORT RAM INDUCTION SYSTEM, POLISHED -- Engineered To Produce Significant Increases In Power By Locating The Air Filter In The Coolest Location Possible Of The Engine Compartment, 50 State Legal, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced Tig-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Guaranteed For Life Of The Vehicle By AEM

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, D16A6"

AEM SHORT RAM INDUCTION SYSTEM, POWDERCOATED BLUE -- Engineered To Produce Significant Increases In Power By Locating The Air Filter In The Coolest Location Possible Of The Engine Compartment, 50 State Legal, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced Tig-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Guaranteed For Life Of The Vehicle By AEM

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: Si; 4 Cyl 1.6L; "GAS, FI, D16A6"

Fits the following 1989-1991 Honda CRX submodels:

• 1989-1991: Base; All Engines;

OEM

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1991: HF; All Engines;

Fits the following 1988-1991 Honda CRX submodels:

• 1988-1988: DX; All Engines;
• 1988-1991: Si; All Engines;

• 1989-1991: Base; All Engines;

Fits 1 more submodels. (Show all) Show less info