Honda Prelude Exhaust

EXHAUST MANIFOLD -- A high quality, direct fit OE replacement exhaust manifold; Made of tough and durable material for strong resistance to harsh temperature condition, providing long-lasting life and service; Proven to last longer than the other exhaust manifold brands that easily wear off; Covered by a 1-year unlimited mileage warranty.

Fits the following 1992-1996 Honda Prelude submodels:

• 1992-1996: S; 4 Cyl 2.2L; "GAS, FI, F22A1"
• 1993-1996: VTEC; 4 Cyl 2.2L; "GAS, FI, H22A1"

FLOWMASTER AMERICAN THUNDER REAR SECTION EXHAUST SYSTEM, ALUMINIZED STEEL -- Single Pipe Out The Rear Exit (SOR), Benefits Include Reduced Backpressure For Improved Acceleration And Towing Power, Cooler Under Hood Temperatures, Cleaner And More Efficient Burn In The Combustion Chambers, And Better Fuel Economy, Delivers Lesser Sound Volume, Features Mandrel-Bent 16-Gauge Aluminized Steel Tubing, Comes With 2 in. Flange Back, 60 Series Delta Flow Muffler, Welding All Slip-Fit Connections Is Strongly Recommended, With Flowmaster's Limited 3-Year Warranty

Fits the following 1997-2001 Honda Prelude submodels:

• 1997-2001: Base; All Engines;

PACESETTER MONZA PERFORMANCE EXHAUST SYSTEM, ALUMINIZED STEEL, BLACK -- Cat-Back, Dual Rear Exit, 2.5 in. Main Piping Diameter, 2.5 in. Tailpipe Diameter, 2.5 in. Tip Outlet Diameter, Includes Aluminized Steel Turbo Muffler With Single Inlet/Dual Outlet Configuration And Dual T304 Stainless Steel Round Exhaust Tip With Angled Cut And Non-Rolled Edge Style, This Exhaust System Is Made From Corrosion-Resistant Aluminized Steel And Designed To Replace The Original Equipment Muffler System, It Utilizes The Right Combination Of Larger-Than-Stock 16-Gauge Mandrel-Bent Tubing And Low Back-Pressure High-Flow Performance Mufflers For Cooler And Smoother Engine Operation And Increased Performance, Comes With All The Necessary Hardware For A Complete Installation, With Pacesetter's 3-Year Warranty

Fits the following 1992-1993 Honda Prelude submodels:

• 1992-1993: Si 4WS; 4 Cyl 2.3L;
• 1992-1993: Si; 4 Cyl 2.3L;

PACESETTER MONZA PERFORMANCE EXHAUST SYSTEM, ALUMINIZED STEEL, BLACK -- Cat-Back, Dual Rear Exit, 2.25 in. Main Piping Diameter, 2.25 in. Tailpipe Diameter, 2.5 in. Tip Outlet Diameter, Includes Aluminized Steel Turbo Muffler With Single Inlet/Dual Outlet Configuration And Dual T304 Stainless Steel Round Exhaust Tip With Angled Cut And Non-Rolled Edge Style, This Exhaust System Is Made From Corrosion-Resistant Aluminized Steel And Designed To Replace The Original Equipment Muffler System, It Utilizes The Right Combination Of Larger-Than-Stock 16-Gauge Mandrel-Bent Tubing And Low Back-Pressure High-Flow Performance Mufflers For Cooler And Smoother Engine Operation And Increased Performance, Comes With All The Necessary Hardware For A Complete Installation, With Pacesetter's 3-Year Warranty

Fits the following 1988-1989 Honda Prelude submodels:

• 1988-1989: 2.0 Si 4WS; 4 Cyl 2.0L;
• 1988-1989: 2.0 Si; 4 Cyl 2.0L;

PACESETTER MONZA PERFORMANCE CAT-BACK EXHAUST SYSTEM, ALUMINIZED STEEL, BLACK -- 2.25 in. main piping diameter, 2.25 in. tailpipe diameter; Dual rear exit; Single inlet and dual outlet muffler configuration; Includes installation hardware, black aluminum muffler, and 2.5 in. dual T-304 stainless steel round exhaust tip with angled-cut and non-rolled edge style; This exhaust system is made from corrosion-resistant aluminized steel and designed to replace the original equipment muffler system; It utilizes the right combination of larger-than-stock 16-gauge mandrel-bent tubing and low back-pressure high-flow performance muffler for cooler and smoother engine operation and increased performance; With Pacesetter's 3-year warranty.

Fits the following 1990-1991 Honda Prelude submodels:

• 1990-1991: 2.0 Si; 4 Cyl 2.0L;

PACESETTER MONZA PERFORMANCE CATBACK EXHAUST SYSTEM, BLACK -- Made From Corrosion-Resistant Aluminized Steel, Designed To Replace Original Equipment Muffler System, Utilizes The Right Combination Of 2-1/2 Large-Than-Stock 16-Gauge Mandrel-Bent Tubing And Low Back-Pressure High-Flow Performance Mufflers For Cooler And Smoother Engine Operation With Increased Performance, Features A 2-1/2 Dual Angle-Cut Chrome-Plated T304 Stainless Steel Monza Premium Exhaust Tip, Includes Necessary Hardware And Installation Instructions

Fits the following 1997-1999 Honda Prelude submodels:

• 1997-1999: Base; 4 Cyl 2.2L;
• 1997-1999: Type SH; 4 Cyl 2.2L;

DORMAN EXHAUST MANIFOLD KIT -- Transports Extremely Hot Exhaust Gases With A Temperature Of Up To 1400 Degrees Fahrenheit From The Cylinder Head To The Exhaust Piping, Provides Mounting For Oxygen Sensors, A.I.R. Piping, And EGR Piping, Seals The Engine Head And Exhaust Piping To Prevent Fumes And Noise From Escaping The Engine Compartment, Application-Specific, Engineered To Perform Better Than The Original OE Design, Includes All The Necessary Hardware For A Complete Installation, Replacement For OE Part Number 18100PT3A00, 18100PT3307, With Dorman's Limited Lifetime Warranty

Fits the following 1992-1996 Honda Prelude submodels:

• 1992-1996: S; 4 Cyl 2.2L; "GAS, FI, F22A1"
• 1993-1996: VTEC; 4 Cyl 2.2L; "GAS, FI, H22A1"

Fits the following 1992-1996 Honda Prelude submodels:

• 1992-1996: S; All Engines;

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.5 in. inlet diameter, 8 in. length; Round shape; Single style; Angle-cut non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2001 Honda Prelude submodels:

• 1996-1996: S; 4 Cyl 2.2L;
• 1996-1996: Si; 4 Cyl 2.3L;

• 1996-1996: VTEC; 4 Cyl 2.2L;

• 1997-2001: Base; 4 Cyl 2.2L;

• 1997-2001: Type SH; 4 Cyl 2.2L;

Fits 3 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.25 in. inlet diameter, 6 in. length; Round shape; Single style; Straight rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2001 Honda Prelude submodels:

• 1996-1996: S; 4 Cyl 2.2L;
• 1996-1996: Si; 4 Cyl 2.3L;

• 1996-1996: VTEC; 4 Cyl 2.2L;

• 1997-2001: Base; 4 Cyl 2.2L;

• 1997-2001: Type SH; 4 Cyl 2.2L;

Fits 3 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3.5 in. outlet diameter, 2.5 in. inlet diameter, 6 in. length; Round shape; Single style; Straight rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2001 Honda Prelude submodels:

• 1996-1996: S; 4 Cyl 2.2L;
• 1996-1996: Si; 4 Cyl 2.3L;

• 1996-1996: VTEC; 4 Cyl 2.2L;

• 1997-2001: Base; 4 Cyl 2.2L;

• 1997-2001: Type SH; 4 Cyl 2.2L;

Fits 3 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3.5 in. outlet diameter, 2.5 in. inlet diameter, 8 in. length; Round shape; Single style; Angle-cut non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2001 Honda Prelude submodels:

• 1996-1996: S; 4 Cyl 2.2L;
• 1996-1996: Si; 4 Cyl 2.3L;

• 1996-1996: VTEC; 4 Cyl 2.2L;

• 1997-2001: Base; 4 Cyl 2.2L;

• 1997-2001: Type SH; 4 Cyl 2.2L;

Fits 3 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, STAINLESS STEEL, POLISHED -- 4 in. outlet diameter, 2.5 in. inlet diameter, 6 in. length; Round shape; Single style; Straight rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2001 Honda Prelude submodels:

• 1996-1996: S; 4 Cyl 2.2L;
• 1996-1996: Si; 4 Cyl 2.3L;

• 1996-1996: VTEC; 4 Cyl 2.2L;

• 1997-2001: Base; 4 Cyl 2.2L;

• 1997-2001: Type SH; 4 Cyl 2.2L;

Fits 3 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.5 in. inlet diameter, 12 in. length; Round shape; Single style; Angle-cut turndown, non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2001 Honda Prelude submodels:

• 1996-1996: S; 4 Cyl 2.2L;
• 1996-1996: Si; 4 Cyl 2.3L;

• 1996-1996: VTEC; 4 Cyl 2.2L;

• 1997-2001: Base; 4 Cyl 2.2L;

• 1997-2001: Type SH; 4 Cyl 2.2L;

Fits 3 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.25 in. inlet diameter, 8 in. length; Round shape; Single style; Angle-cut non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2001 Honda Prelude submodels:

• 1996-1996: S; 4 Cyl 2.2L;
• 1996-1996: Si; 4 Cyl 2.3L;

• 1996-1996: VTEC; 4 Cyl 2.2L;

• 1997-2001: Base; 4 Cyl 2.2L;

• 1997-2001: Type SH; 4 Cyl 2.2L;

Fits 3 more submodels. (Show all) Show less info