Mazda Millenia Brakes

PowerStop 1-Click Evolution Brake Kits contain everything you need to upgrade your braking system. Drilled and slotted brake rotors help keep brake temperatures down, while the Powerstop Evolution Ceramic Pads reduce brake noise and dust. Lower brake temperatures enhance braking performance and longevity.

• Drilled & Slotted rotors look great behind custom (or factory) wheels
• Each Powerstop kit includes necessary brake sensors and hardware where needed – up to a $100 value you’ll only find here! (see item details for specifics)
• Powerstop brake kits ensure that the correct pad is matched to the correct rotor for faster stops
• Powerstop Evolution ceramic brake pads provide a higher coefficient of friction than most OEM or aftermarket pads
• Powerstop Evolution ceramic brake pads enhance stopping power without generating noise and excessive brake dust
• Powerstop Brake Kits are more economical than purchasing stock brakes from the dealer
• Drilled & Slotted rotors provide temperature reduction via drilled holes and gas/dust removal via slots - the end result is more braking performance

Powerstop OE Replacement brake kits provide the opportunity to order one part number and receive all the parts you need for a complete brake job on your vehicle. Powerstop OE replacement rotors are manufactured to OEM specs using G3000 metallurgy, the industry standard for brake rotors. The Evolution Ceramic brake pads that are included keep your wheels clean and provide a quiet commute.

• 1-Click ordering helps choose the complete set of parts for your car on the first try
• Each Powerstop kit includes necessary brake sensors and hardware where needed – up to a $100 value you’ll only find here! (see item details for specifics)
• G3000 metallurgy provides the ideal balance between tensile strength and hardness
• Includes Powerstop Evolution Ceramic Brake Pads to provide more pad bite without noise or dust
• Rotor construction is per OEM specs
• Ceramic brake pads keep your wheels clean and quiet

• 5 x 114.3 mm bolt pattern
• 273.7 mm disc diameter
• 13 mm bolt size
• 26 mm minimum thickness

• Manufactured to meet QS and ISO quality system standards
• Utilizes an electrocoating finish that provides long lasting corrosion protection
• Designed to withstand 400 hours of salt water exposure without rusting
• Double disc grinding ensures parallelism, eliminates run out, and provides near perfect disc thickness
• The double disc grinding also leaves a non-directional finish on the friction surface area for more effective pad-disc break in while providing quieter and smoother stops
• Center-split core casting offers proper heat transfer and thermal efficiency for superior braking and safety
• 100 percent fully machined hat delivers better disc balance
• Mill-corrected to a tolerance of less than 2 oz. per inch

• 5 x 114.3 mm bolt pattern
• 295 mm disc diameter
• 13 mm bolt size
• 26 mm minimum thickness

• Manufactured to meet QS and ISO quality system standards
• Utilizes an electrocoating finish that provides long lasting corrosion protection
• Designed to withstand 400 hours of salt water exposure without rusting
• Double disc grinding ensures parallelism, eliminates run out, and provides near perfect disc thickness
• The double disc grinding also leaves a non-directional finish on the friction surface area for more effective pad-disc break in while providing quieter and smoother stops
• Center-split core casting offers proper heat transfer and thermal efficiency for superior braking and safety
• 100 percent fully machined hat delivers better disc balance
• Mill-corrected to a tolerance of less than 2 oz. per inch

• 5 lugs

• Made from a material that is a direct descendant of the patented StopTech AeroRotor
• Prevents glazing of the pads
• Increases pad bite
• Improves wet and dry braking performance
• Increased molybdenum content that extends reliability, prolongs service life, and helps reduce NVH issues
• Delivers superior resistance to cracking due to thermal stress

• 5 lugs

• Made from a material that is a direct descendant of the patented StopTech AeroRotor
• Prevents glazing of the pads
• Increases pad bite
• Improves wet and dry braking performance
• Increased molybdenum content that extends reliability, prolongs service life, and helps reduce NVH issues
• Delivers superior resistance to cracking due to thermal stress

• 5 x 114.3 mm bolt pattern
• 285.7 mm disc diameter
• 13 mm bolt size
• 7.5 mm minimum thickness

• Manufactured to meet QS and ISO quality system standards
• Utilizes an electrocoating finish that provides long lasting corrosion protection
• Designed to withstand 400 hours of salt water exposure without rusting
• Double disc grinding ensures parallelism, eliminates run out, and provides near perfect disc thickness
• The double disc grinding also leaves a non-directional finish on the friction surface area for more effective pad-disc break in while providing quieter and smoother stops
• Center-split core casting offers proper heat transfer and thermal efficiency for superior braking and safety
• 100 percent fully machined hat delivers better disc balance
• Mill-corrected to a tolerance of less than 2 oz. per inch

CENTRIC POSI QUIET CERAMIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Ceramic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

CENTRIC POSI QUIET CERAMIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Ceramic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

CENTRIC OE FORMULA BRAKE PADS, 2-WHEEL SET

Centric OE Formula Brake Pads are manufactured using OEM or OEM-equivalent material formulations. Centric OE Formula Brake Pads are 100 percent positive molded for even friction material density throughout the pads. Depending on your application, your pads will come with sensor wires and proper hardware installed for optimized performance and ease of installation. Centric OE Formula Brake Pads feature a special scorching process forces any impurities out of the friction material and accelerates the break-in process.

Features:

• Uses fine blank backing plates for correct caliper fitment, even pad wear, and consistent stopping power
• Notched for shims
• 100 percent positive molded for constant material density all throughout the pads
• Manufactured in actual OEM supplier plants using OEM processes, materials and procedures

Item Details:

• Includes shims

Notes: Centric Parts OE Formula Brake Pads are manufactured by original equipment manufacturer suppliers from Asia and Europe including ATE, Ferodo, Sumitomo, Textar, Jurid, DanBlock, Nissin, TRW, Korea Beral, and Pagid.

Fits the following 1995-2002 Mazda Millenia submodels:

• 1995-2002: Base; 6 Cyl 2.5L;
• 1995-2002: S; 6 Cyl 2.3L;

• 1999-2001: Base; 6 Cyl 2.3L;

• 2000-2000: Millennium Edition; 6 Cyl 2.3L;

• 1999-2000: S; 6 Cyl 2.5L;

• 1995-1998: L; 6 Cyl 2.5L;

Fits 4 more submodels. (Show all) Show less info

CENTRIC C-TEK STANDARD SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Restore the performance of your braking system with Centric C-Tek Standard Brake Pads. These high quality OE replacements ensure safe and consistent stopping ability so that you can enjoy your daily drive without worry. Centric C-Tek Standard Brake Pads offer exceptional stopping power and are available for most import and domestic vehicles.

Features:

• 100% asbestos and copper free formulas
• Special semi-metallic friction compounds
• Shimmed to eliminate noise and vibration
• Formulated for reduced noise
• Offers excellent pad and rotor life with minimal brake dust

Item Details:

• Includes shims

CENTRIC PREMIUM SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Premium Semi-Metallic Brake Pads with shims are manufactured using the same positive molding process used by leading automotive manufacturers. Centric Premium Semi-Metallic Brake Pads with shims provide superior stopping power with minimal dusting and noise. These brake pads are formulated for increased service life while maintaining high friction levels at all operating temperatures.

Features:

• High friction level at all temperatures
• 100% shimmed
• Stable friction performance across wide temperature range
• Positive Mold technology
• 100% asbestos and copper free compounds
• Precision cut backing plates
• High anti dust capability
• Application specific OE style shims

Item Details:

• Includes shims