Mazda Mx6 Intakes

K&N 57 SERIES AIRCHARGER HIGH PERFORMANCE AIR INTAKE KITS

• Guaranteed to improve acceleration and power
• Specifically designed to fit your vehicle's engine compartment
• Simple installation, typically in less than 90 minutes
• Washable & reusable air filter lasts up to 100,000 miles before needing service
• Backed by the legendary K&N Million Mile Warranty
• CARB Exempt and street legal in all 50 states

Improve throttle response and power in your vehicle with a K&N 57 Series Aircharger high-performance cold air intake. These high-flow intake kits provide better air flow to your motor by replacing the factory air path with a larger diameter polyethylene tube. This charge of fresh air allows your motor to breathe better and immediately put out more power!

All 57 Series high-flow intakes include the largest conical high-performance filter that will fit in your engine compartment and still use OE holes and mounting points. The bigger filter surface area also allows more air to flow into the engine and captures more dirt, boosting service intervals up to up to 100,000 miles.

Note: Some K&N 57 Series systems won't not fit on applications with lift kits.

Fits the following 1993-1997 Mazda MX-6 submodels:

• 1993-1997: LS; 6 Cyl 2.5L;
• 1996-1996: M Edition; 6 Cyl 2.5L;

AIR INTAKE HOSE, BLACK -- A high quality, OE replacement air intake hose; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1993-1997 Mazda MX-6 submodels:

• 1993-1997: LS; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated"
• 1996-1996: M Edition; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated"

Dorman Products
Dorman Products, Inc. is a leading supplier of automotive products and hardware to the automotive aftermarket.

Fits the following 1988-1992 Mazda MX-6 submodels:

• 1988-1992: All Submodels; All Engines;

DORMAN AIR INTAKE HOSE, SOLD INDIVIDUALLY -- Protects the models or components that are most susceptible to damage by keeping dirt and debris away from the engine; Replaces OE numbers F12Z9B697A, F20113221B.

Fits the following 1990-1992 Mazda MX-6 submodels:

• 1990-1992: DX; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated"
• 1990-1992: LX; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated"

• 1991-1991: LE; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated"

Fits 1 more submodels. (Show all) Show less info

DORMAN AIR INTAKE HOSE, SOLD INDIVIDUALLY -- Protects the models or components that are most susceptible to damage by keeping dirt and debris away from the engine; Replaces OE number KL1113220D.

Fits the following 1993-1997 Mazda MX-6 submodels:

• 1993-1997: LS; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated"
• 1996-1996: M Edition; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated"

FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets

Fits the following 1988-1992 Mazda MX-6 submodels:

• 1992-1992: Base; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated"
• 1992-1992: Base; 4 Cyl 2.2L; "GAS, FI, Turbocharged"

• 1988-1992: DX; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated"

• 1988-1992: GT; 4 Cyl 2.2L; "GAS, FI, Turbocharged"

• 1988-1992: LX; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated"

• 1991-1991: LE; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated"

• 1989-1990: GT 4WS; 4 Cyl 2.2L; "GAS, FI, Turbocharged"

Fits 5 more submodels. (Show all) Show less info

FELPRO INTAKE MANIFOLD GASKET SET -- Includes lower set; A high quality, direct fit OE replacement intake manifold gasket set.

Fits the following 1993-1997 Mazda MX-6 submodels:

• 1993-1997: Base; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated"

FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, OE replacement intake manifold gasket set.

Fits the following 1993-1997 Mazda MX-6 submodels:

• 1993-1997: LS; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated"
• 1996-1996: M Edition; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated"

Ishino
Ishino Japan is an original equipment manufacturer of sealing products, lubricants, and gaskets.

Fits the following 1993-1997 Mazda MX-6 submodels:

• 1993-1997: LS; 6 Cyl 2.5L;
• 1996-1996: M Edition; 6 Cyl 2.5L;

Ishino
Ishino Japan is an original equipment manufacturer of sealing products, lubricants, and gaskets.

Fits the following 1993-1997 Mazda MX-6 submodels:

• 1993-1997: Base; 4 Cyl 2.0L;

Ishino
Ishino Japan is an original equipment manufacturer of sealing products, lubricants, and gaskets.

Fits the following 1988-1992 Mazda MX-6 submodels:

• 1988-1992: All Submodels; All Engines;

BECK ARNLEY INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket; With Beck Arnley's limited warranty.

Fits the following 1993-1997 Mazda MX-6 submodels:

• 1993-1997: LS; 6 Cyl 2.5L;
• 1996-1996: M Edition; 6 Cyl 2.5L;

BECK-ARNLEY INTAKE MANIFOLD GASKET -- A High Quality, Direct-Fit OEM Replacement Intake Manifold Gasket

Fits the following 1993-1997 Mazda MX-6 submodels:

• 1993-1997: Base; 4 Cyl 2.0L;

BECK-ARNLEY INTAKE MANIFOLD GASKET -- A High Quality, Direct-Fit OEM Replacement Intake Manifold Gasket

Fits the following 1993-1997 Mazda MX-6 submodels:

• 1993-1997: LS; 6 Cyl 2.5L;
• 1996-1996: M Edition; 6 Cyl 2.5L;

VICTOR INTAKE MANIFOLD GASKETS, SET OF 2 -- A high quality, OE replacement intake manifold gasket set.

Fits the following 1990-1992 Mazda MX-6 submodels:

• 1992-1992: Base; 4 Cyl 2.2L; "Naturally Aspirated"
• 1992-1992: Base; 4 Cyl 2.2L; "Turbocharged"

• 1992-1992: DX; 4 Cyl 2.2L; "Naturally Aspirated"

• 1992-1992: GT; 4 Cyl 2.2L; "Turbocharged"

• 1992-1992: LX; 4 Cyl 2.2L; "Naturally Aspirated"

• 1991-1991: LE; All Engines;

• 1990-1991: DX; All Engines;

• 1990-1991: GT; All Engines;

• 1990-1991: LX; All Engines;

• 1990-1990: GT 4WS; All Engines;

Fits 8 more submodels. (Show all) Show less info