Mazda Protege Exhaust

EXHAUST MANIFOLD -- A high quality, direct fit OE replacement exhaust manifold; Made of tough and durable material for strong resistance to harsh temperature condition, providing long-lasting life and service; Proven to last longer than the other exhaust manifold brands that easily wear off; Covered by a 1-year unlimited mileage warranty.

Fits the following 1995-1998 Mazda Protege submodels:

• 1995-1998: DX; 4 Cyl 1.5L;
• 1995-1998: LX; 4 Cyl 1.5L;

MAGNAFLOW STAINLESS STEEL CAT-BACK EXHAUST SYSTEM -- 2.25 in. Tubing O.D. Size, 4 in. Tip O.D. Size, Rear Exit Position, Single System, Includes 5 in. X 8 in. X 14 in. Muffler And Polished Stainless Steel Oval Tip, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Fits the following 2001 Mazda Protege submodels:

• 2001-2001: ES; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated"
• 2001-2001: LX; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated"

• 2001-2001: MP3; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated"

Fits 1 more submodels. (Show all) Show less info

MAGNAFLOW STAINLESS STEEL CAT-BACK EXHAUST SYSTEM -- 2.25 in. Tubing O.D. Size, 4 in. Tip O.D. Size, Rear Exit Position, Single System, Includes 5 in. X 8 in. X 14 in. Muffler And Rolled Stainless Steel Tip, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Fits the following 2003 Mazda Protege submodels:

• 2003-2003: Mazdaspeed; 4 Cyl 2.0L; "GAS, FI, Turbocharged"

DORMAN EXHAUST MANIFOLD KIT -- Includes 5 studs, 5 nuts, 1 flange gasket, and 1 manifold gasket; Cast iron construction; Engineered to perform better than the original OE design; Transports extremely hot exhaust gases with a temperature of up to 1400 degrees Fahrenheit from the cylinder head to the exhaust piping; Provides mounting for oxygen sensors, A.I.R. piping, and EGR piping; Seals the engine head and exhaust piping to prevent fumes and noise from escaping the engine compartment; Application-specific; Replacement for OE part number Z509-13-451; With Dorman's limited lifetime warranty.

Fits the following 1995-1998 Mazda Protege submodels:

• 1995-1998: DX; 4 Cyl 1.5L; "GAS, FI"
• 1995-1998: LX; 4 Cyl 1.5L; "GAS, FI"

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.5 in. inlet diameter, 8 in. length; Round shape; Single style; Angle-cut non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2003 Mazda Protege submodels:

• 1996-1998: DX; 4 Cyl 1.5L;
• 1996-1998: LX; 4 Cyl 1.5L;

• 1996-2000: ES; 4 Cyl 1.8L;

• 1999-2001: DX; 4 Cyl 1.6L;

• 1999-2001: LX; 4 Cyl 1.6L;

• 2001-2001: MP3; 4 Cyl 2.0L;

• 2001-2003: ES; 4 Cyl 2.0L;

• 2001-2003: LX; 4 Cyl 2.0L;

• 2002-2003: DX; 4 Cyl 2.0L;

• 2003-2003: Mazdaspeed; 4 Cyl 2.0L;

Fits 8 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.25 in. inlet diameter, 6 in. length; Round shape; Single style; Straight rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2003 Mazda Protege submodels:

• 1996-1998: DX; 4 Cyl 1.5L;
• 1996-1998: LX; 4 Cyl 1.5L;

• 1996-2000: ES; 4 Cyl 1.8L;

• 1999-2001: DX; 4 Cyl 1.6L;

• 1999-2001: LX; 4 Cyl 1.6L;

• 2001-2001: MP3; 4 Cyl 2.0L;

• 2001-2003: ES; 4 Cyl 2.0L;

• 2001-2003: LX; 4 Cyl 2.0L;

• 2002-2003: DX; 4 Cyl 2.0L;

• 2003-2003: Mazdaspeed; 4 Cyl 2.0L;

Fits 8 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3.5 in. outlet diameter, 2.5 in. inlet diameter, 6 in. length; Round shape; Single style; Straight rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2003 Mazda Protege submodels:

• 1996-1998: DX; 4 Cyl 1.5L;
• 1996-1998: LX; 4 Cyl 1.5L;

• 1996-2000: ES; 4 Cyl 1.8L;

• 1999-2001: DX; 4 Cyl 1.6L;

• 1999-2001: LX; 4 Cyl 1.6L;

• 2001-2001: MP3; 4 Cyl 2.0L;

• 2001-2003: ES; 4 Cyl 2.0L;

• 2001-2003: LX; 4 Cyl 2.0L;

• 2002-2003: DX; 4 Cyl 2.0L;

• 2003-2003: Mazdaspeed; 4 Cyl 2.0L;

Fits 8 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3.5 in. outlet diameter, 2.5 in. inlet diameter, 8 in. length; Round shape; Single style; Angle-cut non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2003 Mazda Protege submodels:

• 1996-1998: DX; 4 Cyl 1.5L;
• 1996-1998: LX; 4 Cyl 1.5L;

• 1996-2000: ES; 4 Cyl 1.8L;

• 1999-2001: DX; 4 Cyl 1.6L;

• 1999-2001: LX; 4 Cyl 1.6L;

• 2001-2001: MP3; 4 Cyl 2.0L;

• 2001-2003: ES; 4 Cyl 2.0L;

• 2001-2003: LX; 4 Cyl 2.0L;

• 2002-2003: DX; 4 Cyl 2.0L;

• 2003-2003: Mazdaspeed; 4 Cyl 2.0L;

Fits 8 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, STAINLESS STEEL, POLISHED -- 4 in. outlet diameter, 2.5 in. inlet diameter, 6 in. length; Round shape; Single style; Straight rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2003 Mazda Protege submodels:

• 1996-1998: DX; 4 Cyl 1.5L;
• 1996-1998: LX; 4 Cyl 1.5L;

• 1996-2000: ES; 4 Cyl 1.8L;

• 1999-2001: DX; 4 Cyl 1.6L;

• 1999-2001: LX; 4 Cyl 1.6L;

• 2001-2001: MP3; 4 Cyl 2.0L;

• 2001-2003: ES; 4 Cyl 2.0L;

• 2001-2003: LX; 4 Cyl 2.0L;

• 2002-2003: DX; 4 Cyl 2.0L;

• 2003-2003: Mazdaspeed; 4 Cyl 2.0L;

Fits 8 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.5 in. inlet diameter, 12 in. length; Round shape; Single style; Angle-cut turndown, non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2003 Mazda Protege submodels:

• 1996-1998: DX; 4 Cyl 1.5L;
• 1996-1998: LX; 4 Cyl 1.5L;

• 1996-2000: ES; 4 Cyl 1.8L;

• 1999-2001: DX; 4 Cyl 1.6L;

• 1999-2001: LX; 4 Cyl 1.6L;

• 2001-2001: MP3; 4 Cyl 2.0L;

• 2001-2003: ES; 4 Cyl 2.0L;

• 2001-2003: LX; 4 Cyl 2.0L;

• 2002-2003: DX; 4 Cyl 2.0L;

• 2003-2003: Mazdaspeed; 4 Cyl 2.0L;

Fits 8 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.25 in. inlet diameter, 8 in. length; Round shape; Single style; Angle-cut non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 1996-2003 Mazda Protege submodels:

• 1996-1998: DX; 4 Cyl 1.5L;
• 1996-1998: LX; 4 Cyl 1.5L;

• 1996-2000: ES; 4 Cyl 1.8L;

• 1999-2001: DX; 4 Cyl 1.6L;

• 1999-2001: LX; 4 Cyl 1.6L;

• 2001-2001: MP3; 4 Cyl 2.0L;

• 2001-2003: ES; 4 Cyl 2.0L;

• 2001-2003: LX; 4 Cyl 2.0L;

• 2002-2003: DX; 4 Cyl 2.0L;

• 2003-2003: Mazdaspeed; 4 Cyl 2.0L;

Fits 8 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, SLASH, STAINLESS, SOLD INDIVIDUALLY -- Dimensions 3 Clamp-On Inlet, 3.5 Slash-Cut Outlet, 18" Overall Length, Made Of High Quality 100% Polished 304 Stainless Steel Which Delivers The Brilliant Show Look And Will Not Chip, Flake Or Rust Like Chrome, Features An Exclusive Built-In Clamp At The End Of Each Tip, Hassle Free Installation, Provides A Very Clean Custom Look

Fits the following 1996-2003 Mazda Protege submodels:

• 1996-1998: DX; 4 Cyl 1.5L;
• 1996-1998: LX; 4 Cyl 1.5L;

• 1996-2000: ES; 4 Cyl 1.8L;

• 1999-2001: DX; 4 Cyl 1.6L;

• 1999-2001: LX; 4 Cyl 1.6L;

• 2001-2001: MP3; 4 Cyl 2.0L;

• 2001-2003: ES; 4 Cyl 2.0L;

• 2001-2003: LX; 4 Cyl 2.0L;

• 2002-2003: DX; 4 Cyl 2.0L;

• 2003-2003: Mazdaspeed; 4 Cyl 2.0L;

Fits 8 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, TURN DOWN, STAINLESS, SOLD INDIVIDUALLY -- Dimensions 2.25 Clamp-On Inlet, 3 Turn-Down Slash-Cut Outlet, 12" Overall Length, Made Of High Quality 100% Polished 304 Stainless Steel Which Delivers The Brilliant Show Look And Will Not Chip, Flake Or Rust Like Chrome, Features An Exclusive Built-In Clamp At The End Of Each Tip, Hassle Free Installation, Provides A Very Clean Custom Look

Fits the following 1996-2003 Mazda Protege submodels:

• 1996-1998: DX; 4 Cyl 1.5L;
• 1996-1998: LX; 4 Cyl 1.5L;

• 1999-2001: DX; 4 Cyl 1.6L;

• 1999-2001: LX; 4 Cyl 1.6L;

• 2002-2003: SE; 4 Cyl 1.6L;

Fits 3 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3.5 in. outlet diameter, 2.25 in. inlet diameter, 12 in. length; Round shape; Single style; Angle-cut non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free installation; With Gibson's limited warranty.

Fits the following 1996-2003 Mazda Protege submodels:

• 1996-1998: DX; 4 Cyl 1.5L;
• 1996-1998: LX; 4 Cyl 1.5L;

• 1996-2000: ES; 4 Cyl 1.8L;

• 1999-2001: DX; 4 Cyl 1.6L;

• 1999-2001: LX; 4 Cyl 1.6L;

• 2001-2001: MP3; 4 Cyl 2.0L;

• 2001-2003: ES; 4 Cyl 2.0L;

• 2001-2003: LX; 4 Cyl 2.0L;

• 2002-2003: DX; 4 Cyl 2.0L;

• 2003-2003: Mazdaspeed; 4 Cyl 2.0L;

Fits 8 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, SLASH, STAINLESS, SOLD INDIVIDUALLY -- Dimensions 3.5 Clamp-On Inlet, 4 Slash-Cut Outlet, 12" Overall Length, Made Of High Quality 100% Polished 304 Stainless Steel Which Delivers The Brilliant Show Look And Will Not Chip, Flake Or Rust Like Chrome, Features An Exclusive Built-In Clamp At The End Of Each Tip, Hassle Free Installation, Provides A Very Clean Custom Look

Fits the following 1996-2003 Mazda Protege submodels:

• 1996-1998: DX; 4 Cyl 1.5L;
• 1996-1998: LX; 4 Cyl 1.5L;

• 1996-2000: ES; 4 Cyl 1.8L;

• 1999-2001: DX; 4 Cyl 1.6L;

• 1999-2001: LX; 4 Cyl 1.6L;

• 2001-2001: MP3; 4 Cyl 2.0L;

• 2001-2003: ES; 4 Cyl 2.0L;

• 2001-2003: LX; 4 Cyl 2.0L;

• 2002-2003: DX; 4 Cyl 2.0L;

• 2003-2003: Mazdaspeed; 4 Cyl 2.0L;

Fits 8 more submodels. (Show all) Show less info