Mercedes 240d Brake Pads

• Manufactured from a semi-metallic compound with aramid soft fibers
• With center slots and edge chamfers plus noise reduction shims on the reverse
• EBC red Brake-In surface coating conditions rotors after installation allowing pads to quickly deliver their stopping power
• Hardware and wear leads included where fitted as standard by factory
• Long lasting high friction pad designed for non-sport urban driving on all sedans, SUVs, and light trucks

• Asbestos-free
• Made from a innovative blend of Kevlar fibers and enhanced ceramic particles
• Produces 60-90 percent less dust than OE pads
• Brake bite from cold is as good as OE or better
• Brake performance only increases as the pads heat up
• Built with shims, slots, and chamfers for silent braking
• Coated with Brake-In compound for faster break-in and greater initial braking effect

• Emits less dust than equivalent semi-metallic pads
• Proven in tests to stop a vehicle 20 feet sooner than stock pads
• Reduces heat fade and rotor wear
• Fully shimmed, chamfered, and slotted for silent braking
• Features EBC Brake-In surface coating to accelerate pad bed in after installation
• Greenstuff pads are for spirited street driving

• Manufactured from a semi-metallic compound with aramid soft fibers
• With center slots and edge chamfers plus noise reduction shims on the reverse
• EBC red Brake-In surface coating conditions rotors after installation allowing pads to quickly deliver their stopping power
• Hardware and wear leads included where fitted as standard by factory
• Long lasting high friction pad designed for non-sport urban driving on all sedans, SUVs, and light trucks

• Asbestos-free
• Made from a innovative blend of Kevlar fibers and enhanced ceramic particles
• Produces 60-90 percent less dust than OE pads
• Brake bite from cold is as good as OE or better
• Brake performance only increases as the pads heat up
• Built with shims, slots, and chamfers for silent braking
• Coated with Brake-In compound for faster break-in and greater initial braking effect

• Manufactured from a semi-metallic compound with aramid soft fibers
• With center slots and edge chamfers plus noise reduction shims on the reverse
• EBC red Brake-In surface coating conditions rotors after installation allowing pads to quickly deliver their stopping power
• Hardware and wear leads included where fitted as standard by factory
• Long lasting high friction pad designed for non-sport urban driving on all sedans, SUVs, and light trucks

• Emits less dust than equivalent semi-metallic pads
• Proven in tests to stop a vehicle 20 feet sooner than stock pads
• Reduces heat fade and rotor wear
• Fully shimmed, chamfered, and slotted for silent braking
• Features EBC Brake-In surface coating to accelerate pad bed in after installation
• Greenstuff pads are for spirited street driving

• Emits less dust than equivalent semi-metallic pads
• Proven in tests to stop a vehicle 20 feet sooner than stock pads
• Reduces heat fade and rotor wear
• Fully shimmed, chamfered, and slotted for silent braking
• Features EBC Brake-In surface coating to accelerate pad bed in after installation
• Greenstuff pads are for spirited street driving

CENTRIC PREMIUM SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Premium Semi-Metallic Brake Pads with shims are manufactured using the same positive molding process used by leading automotive manufacturers. Centric Premium Semi-Metallic Brake Pads with shims provide superior stopping power with minimal dusting and noise. These brake pads are formulated for increased service life while maintaining high friction levels at all operating temperatures.

Features:

• High friction level at all temperatures
• 100% shimmed
• Stable friction performance across wide temperature range
• Positive Mold technology
• 100% asbestos and copper free compounds
• Precision cut backing plates
• High anti dust capability
• Application specific OE style shims

Item Details:

• Includes shims

CENTRIC POSI QUIET CERAMIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Ceramic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

CENTRIC POSI QUIET CERAMIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Ceramic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

CENTRIC POSI QUIET SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Semi-Metallic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos and copper free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

CENTRIC POSI QUIET EXTENDED WEAR SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Extended Wear Semi-Metallic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance, even at high temperatures
• Low rotor wear
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

CENTRIC POSI QUIET SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Semi-Metallic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos and copper free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

CENTRIC OE FORMULA BRAKE PADS, 2-WHEEL SET

Centric OE Formula Brake Pads are manufactured using OEM or OEM-equivalent material formulations. Centric OE Formula Brake Pads are 100 percent positive molded for even friction material density throughout the pads. Depending on your application, your pads will come with sensor wires and proper hardware installed for optimized performance and ease of installation. Centric OE Formula Brake Pads feature a special scorching process forces any impurities out of the friction material and accelerates the break-in process.

Features:

• Uses fine blank backing plates for correct caliper fitment, even pad wear, and consistent stopping power
• Notched for shims
• 100 percent positive molded for constant material density all throughout the pads
• Manufactured in actual OEM supplier plants using OEM processes, materials and procedures

Item Details:

• Includes shims

Notes: Centric Parts OE Formula Brake Pads are manufactured by original equipment manufacturer suppliers from Asia and Europe including ATE, Ferodo, Sumitomo, Textar, Jurid, DanBlock, Nissin, TRW, Korea Beral, and Pagid.

Fits the following 1974-1983 Mercedes Benz 240D submodels:

• 1974-1983: All Submodels; All Engines;