Mercedes 500sec Brakes

EBC Super Street Kit is definitely the best choice for a performance brake kit. Made from top notch materials, brake discs and brake pads are also carefully engineered to give you the braking performance you desire. It provides better grip and generates lesser dust at initial stop.

• With a wide aperture scraper slots
• USA made
• Black anodized finish for domestic vehicles
• Gold anodized finish for imported vehicles
• Drives out gases, dust, and dirt
• Prevents record groove effect due to the slotted design
• Helps cool down brake pad surface during heavy braking

EBC Yellowstuff 4000 Brake Pad Details:

• Made to match or even exceed OEM brake pads
• Great initial brake feel
• Exactly made for Muscle and High Horsepower cars
• Absolutely no rotor vibration
• Does not require warm up
• Manufactured in the US

Leave your braking problems behind with EBC Premium Street Stage 1 Brake Disc and Pad Kit. These kits are the perfect combination of OE replacement rotors and pads, making daily driving and stopping fast, safe, and easy.

EBC UPR Premium Brake Disc Details:

• Made from G3000 gray iron
• Precision machined
• Tested and inspected for quality and performance

• Unique Brake-In coating for instant braking efficiency on installation
• Powder coat finish provides lifetime resistance against corrosion and stops moisture build-up
• AF42/66 friction material for long lasting pad life

• 5 lugs
• 12.6 in. disc diameter

• Manufactured to OE specifications using high tensile strength G3000 gray cast iron
• Precision machined, balanced, and 100 percent one by one run out inspected to guarantee zero rotor distortion out of the box

• 5 x 112 mm bolt pattern
• 12.6 in. disc diameter

• Made from precision machined, high quality gray iron that went through extensive testing and rigorous quality control
• Dimple drilled to avoid stress cracks
• Slotted to avoid the record grooves or galling common with non-slotted rotors
• New gold anodized EBC finish provides great looks whilst preventing corrosion

• Asbestos-free
• Made from a innovative blend of Kevlar fibers and enhanced ceramic particles
• Produces 60-90 percent less dust than OE pads
• Brake bite from cold is as good as OE or better
• Brake performance only increases as the pads heat up
• Built with shims, slots, and chamfers for silent braking
• Coated with Brake-In compound for faster break-in and greater initial braking effect

• Manufactured from a semi-metallic compound with aramid soft fibers
• With center slots and edge chamfers plus noise reduction shims on the reverse
• EBC red Brake-In surface coating conditions rotors after installation allowing pads to quickly deliver their stopping power
• Hardware and wear leads included where fitted as standard by factory
• Long lasting high friction pad designed for non-sport urban driving on all sedans, SUVs, and light trucks

• Intense resistance to fade under load
• Utterly resists brake disc vibration
• Exhibits a dust rating similar to OEM parts
• Shimmed to reduce noise
• Slotted to avoid heat cracks
• Chamfered to minimize low speed noise
• Coated with Brake-In compound for faster break-in and greater initial braking effect

• Emits less dust than equivalent semi-metallic pads
• Proven in tests to stop a vehicle 20 feet sooner than stock pads
• Reduces heat fade and rotor wear
• Fully shimmed, chamfered, and slotted for silent braking
• Features EBC Brake-In surface coating to accelerate pad bed in after installation
• Greenstuff pads are for spirited street driving

• Emits less dust than equivalent semi-metallic pads
• Proven in tests to stop a vehicle 20 feet sooner than stock pads
• Reduces heat fade and rotor wear
• Fully shimmed, chamfered, and slotted for silent braking
• Features EBC Brake-In surface coating to accelerate pad bed in after installation
• Greenstuff pads are for spirited street driving

• Manufactured from a semi-metallic compound with aramid soft fibers
• With center slots and edge chamfers plus noise reduction shims on the reverse
• EBC red Brake-In surface coating conditions rotors after installation allowing pads to quickly deliver their stopping power
• Hardware and wear leads included where fitted as standard by factory
• Long lasting high friction pad designed for non-sport urban driving on all sedans, SUVs, and light trucks

• Asbestos-free
• Made from a innovative blend of Kevlar fibers and enhanced ceramic particles
• Produces 60-90 percent less dust than OE pads
• Brake bite from cold is as good as OE or better
• Brake performance only increases as the pads heat up
• Built with shims, slots, and chamfers for silent braking
• Coated with Brake-In compound for faster break-in and greater initial braking effect

• Intense resistance to fade under load
• Utterly resists brake disc vibration
• Exhibits a dust rating similar to OEM parts
• Shimmed to reduce noise
• Slotted to avoid heat cracks
• Chamfered to minimize low speed noise
• Coated with Brake-In compound for faster break-in and greater initial braking effect

• 5 x 112 mm bolt pattern
• 279 mm disc diameter
• 15 mm bolt size
• 8.3 mm minimum thickness

• Manufactured to meet QS and ISO quality system standards
• Utilizes an electrocoating finish that provides long lasting corrosion protection
• Designed to withstand 400 hours of salt water exposure without rusting
• Double disc grinding ensures parallelism, eliminates run out, and provides near perfect disc thickness
• The double disc grinding also leaves a non-directional finish on the friction surface area for more effective pad-disc break in while providing quieter and smoother stops
• Center-split core casting offers proper heat transfer and thermal efficiency for superior braking and safety
• 100 percent fully machined hat delivers better disc balance
• Mill-corrected to a tolerance of less than 2 oz. per inch

• 5 x 112 mm bolt pattern
• 320 mm disc diameter
• 15.3 mm bolt size
• 27.4 mm minimum thickness

• Manufactured to meet QS and ISO quality system standards
• Utilizes an electrocoating finish that provides long lasting corrosion protection
• Designed to withstand 400 hours of salt water exposure without rusting
• Double disc grinding ensures parallelism, eliminates run out, and provides near perfect disc thickness
• The double disc grinding also leaves a non-directional finish on the friction surface area for more effective pad-disc break in while providing quieter and smoother stops
• Center-split core casting offers proper heat transfer and thermal efficiency for superior braking and safety
• 100 percent fully machined hat delivers better disc balance
• Mill-corrected to a tolerance of less than 2 oz. per inch

• 5 x 112 mm bolt pattern
• 300 mm disc diameter
• 17 mm bolt size
• 19.4 mm minimum thickness

• Manufactured to meet QS and ISO quality system standards
• Utilizes an electrocoating finish that provides long lasting corrosion protection
• Designed to withstand 400 hours of salt water exposure without rusting
• Double disc grinding ensures parallelism, eliminates run out, and provides near perfect disc thickness
• The double disc grinding also leaves a non-directional finish on the friction surface area for more effective pad-disc break in while providing quieter and smoother stops
• Center-split core casting offers proper heat transfer and thermal efficiency for superior braking and safety
• 100 percent fully machined hat delivers better disc balance
• Mill-corrected to a tolerance of less than 2 oz. per inch