Mercedes S420 Brake Disc

• 5 lugs
• 12.6 in. disc diameter

• Manufactured to OE specifications using high tensile strength G3000 gray cast iron
• Precision machined, balanced, and 100 percent one by one run out inspected to guarantee zero rotor distortion out of the box

• 5 x 112 mm bolt pattern
• 12.6 in. disc diameter

• Made from precision machined, high quality gray iron that went through extensive testing and rigorous quality control
• Dimple drilled to avoid stress cracks
• Slotted to avoid the record grooves or galling common with non-slotted rotors
• New gold anodized EBC finish provides great looks whilst preventing corrosion

• 5 x 112 mm bolt pattern
• 300 mm disc diameter
• 17 mm bolt size
• 19.4 mm minimum thickness

• Manufactured to meet QS and ISO quality system standards
• Utilizes an electrocoating finish that provides long lasting corrosion protection
• Designed to withstand 400 hours of salt water exposure without rusting
• Double disc grinding ensures parallelism, eliminates run out, and provides near perfect disc thickness
• The double disc grinding also leaves a non-directional finish on the friction surface area for more effective pad-disc break in while providing quieter and smoother stops
• Center-split core casting offers proper heat transfer and thermal efficiency for superior braking and safety
• 100 percent fully machined hat delivers better disc balance
• Mill-corrected to a tolerance of less than 2 oz. per inch

• 5 x 112 mm bolt pattern
• 300 mm disc diameter
• 17 mm bolt size
• 19.4 mm minimum thickness

• Manufactured to meet QS and ISO quality system standards
• Utilizes an electrocoating finish that provides long lasting corrosion protection
• Designed to withstand 400 hours of salt water exposure without rusting
• Double disc grinding ensures parallelism, eliminates run out, and provides near perfect disc thickness
• The double disc grinding also leaves a non-directional finish on the friction surface area for more effective pad-disc break in while providing quieter and smoother stops
• Center-split core casting offers proper heat transfer and thermal efficiency for superior braking and safety
• 100 percent fully machined hat delivers better disc balance
• Mill-corrected to a tolerance of less than 2 oz. per inch

CENTRIC HIGH CARBON BRAKE DISC, VENTED, PLAIN SURFACE, SOLD INDIVIDUALLY

Centric High Carbon brake disc contains an advanced metallurgy that greatly reduces the possibility of pad squeal especially with higher friction. This disc features a double disc ground finish which virtually eliminates run out and any disc thickness variation issues. Centric High Carbon brake disc utilizes an Electrocoating finish that provides long lasting corrosion protection. Mill balancing ensures smooth operation at all speeds.

Item Specifications:

• 5 x 4.41 in. (5 x 112 mm) bolt pattern
• 12.6 in. (320 mm) disc diameter
• 82 mm height
• 30 mm nom. thickness
• 27.4 mm min. thickness
• 67 mm hub reg.
• 15.3 mm bolt size

Item Details:

• Cast iron disc material
• Non-directional disc finish
• Black E-coating hat finish

• 5 lugs

• Offers consistent braking even under hard driving conditions
• Provides reliable braking under wet conditions
• Delivers superior resistance to cracking due to thermal stress

• 5 lugs

• Offers consistent braking even under hard driving conditions
• Provides reliable braking under wet conditions
• Delivers superior resistance to cracking due to thermal stress

A high quality, OE replacement brake disc. This REPLACEMENT brake disc is made from premium material for optimum disc wear and manufactured to OE comparable design, fit and specifications for balance and reliability.

Specifications:

• 5 x 4.41 in. bolt pattern
• 11.81 in. outer diameter
• 2.64 in .inner diameter
• 0.67 in. bolt size
• 0.76 in. minimum thickness
• Non-directional

Features and Benefits:

• Vented construction

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

• 5 lugs
• 300 mm disc diameter
• 22 mm thickness
• 19.4 mm minimum thickness
• 55 mm height
• QS-9000, ISO 9001, and TUV/ABE certified

• Made from casting that came from Brembo facilities to ensure uniform thickness
• Coated for corrosion resistance
• Machined to exacting tolerances
• Electronically balanced to minimize vibration

• Enhances stopping power
• Reduces noise while maximizing cooling, resulting in less wear and more consistent braking

• Enhances stopping power
• Reduces noise while maximizing cooling, resulting in less wear and more consistent braking