Suzuki Samurai Oxygen Sensor

UNIVERSAL OXYGEN SENSOR, HEATED, 4-WIRE, SOLD INDIVIDUALLY

This REPLACEMENT oxygen sensor is crafted from high quality materials - stainless steel shell, hex nut, shield, Teflon-covered insulated wires, high-temperature rubber internal and external seals, and threaded tube coated with anti-seize compound.

Tested to ensure highest level of quality and reliability; it helps to reduce harmful emissions and extends catalyst life.

Notes: May not be compatible with flanges. May require minor modifications

View Installation Instruction

Replacement brand parts are the most affordable solution for your replacement needs! Replacement specializes in a wide range of OE comparable auto parts including body parts, lighting, electrical, brakes, suspension, intake, exhaust, cooling and heating parts. All Replacement brand items are backed by 1-year, unlimited-mileage warranty.

Fits the following 1986-1995 Suzuki Samurai submodels:

• 1986-1995: All Submodels; All Engines;

UNIVERSAL OXYGEN SENSOR, HEATED, 3-WIRE, SOLD INDIVIDUALLY

This REPLACEMENT oxygen sensor is crafted from high quality materials - stainless steel shell, hex nut, shield, Teflon-covered insulated wires, high-temperature rubber internal and external seals, and threaded tube coated with anti-seize compound.

Tested to ensure highest level of quality and reliability; it helps to reduce harmful emissions and extends catalyst life.

Notes: May not be compatible with flanges. May require minor modifications

View Installation Instruction

Replacement brand parts are the most affordable solution for your replacement needs! Replacement specializes in a wide range of OE comparable auto parts including body parts, lighting, electrical, brakes, suspension, intake, exhaust, cooling and heating parts. All Replacement brand items are backed by 1-year, unlimited-mileage warranty.

Fits the following 1985-1995 Suzuki Samurai submodels:

• 1985-1995: All Submodels; All Engines;

UNIVERSAL OXYGEN SENSOR, UNHEATED, 2-WIRE, SOLD INDIVIDUALLY

This REPLACEMENT oxygen sensor is crafted from high quality materials - stainless steel shell, hex nut, shield, Teflon-covered insulated wires, high-temperature rubber internal and external seals, and threaded tube coated with anti-seize compound.

Tested to ensure highest level of quality and reliability; it helps to reduce harmful emissions and extends catalyst life.

Notes: May not be compatible with flanges. May require minor modifications

View Installation Instruction

Replacement brand parts are the most affordable solution for your replacement needs! Replacement specializes in a wide range of OE comparable auto parts including body parts, lighting, electrical, brakes, suspension, intake, exhaust, cooling and heating parts. All Replacement brand items are backed by 1-year, unlimited-mileage warranty.

Fits the following 1986-1995 Suzuki Samurai submodels:

• 1986-1995: All Submodels; All Engines;

UNIVERSAL OXYGEN SENSOR, UNHEATED, 1-WIRE, SOLD INDIVIDUALLY

This REPLACEMENT oxygen sensor is crafted from high quality materials - stainless steel shell, hex nut, shield, Teflon-covered insulated wires, high-temperature rubber internal and external seals, and threaded tube coated with anti-seize compound.

Tested to ensure highest level of quality and reliability; it helps to reduce harmful emissions and extends catalyst life.

Notes: May not be compatible with flanges. May require minor modifications

View Installation Instruction

Replacement brand parts are the most affordable solution for your replacement needs! Replacement specializes in a wide range of OE comparable auto parts including body parts, lighting, electrical, brakes, suspension, intake, exhaust, cooling and heating parts. All Replacement brand items are backed by 1-year, unlimited-mileage warranty.

Fits the following 1985-1995 Suzuki Samurai submodels:

• 1985-1995: All Submodels; All Engines;

BOSCH REGULAR CLASS OXYGEN SENSOR

Bosch Regular Class Oxygen Sensor provides submersible patented connection system that protects against contamination, withstands the effects of extreme temperatures, and engine vibration. Made to improve engine performance, prevents premature failure for catalytic converter, and reduces harmful emissions.

Specifications:

• 1-wire
• 5.1 in. wire length
• 0-1 V
• Unheated
• Thread-in mounting style
• Includes wiring harness

Features:

• Manufactured with a two-foot length sensor wire
• Uses a submersible patented connection system that protects against contamination and withstands the effects of extreme temperatures and engine vibration
• Posi-lock connectors that can be unscrewed and reconnected in case of a wiring mistake

Wire splicing required.

Fits the following 1985-1993 Suzuki Samurai submodels:

• 1991-1993: JL; 4 Cyl 1.3L;
• 1986-1993: JA; 4 Cyl 1.3L;

• 1991-1991: JS; 4 Cyl 1.3L;

• 1985-1989: Base; 4 Cyl 1.3L;

• 1986-1988: JX; 4 Cyl 1.3L;

• 1986-1987: JX SE; 4 Cyl 1.3L;

Fits 4 more submodels. (Show all) Show less info

Bosch Oxygen Sensor

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style connectors and wire lengths.
• Base ceramic probe of Zirconium and Yttrium.
• Patented Platinum Power Grid.
• Fine particle filter.

From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

OE Connector

Fits the following 1986-1995 Suzuki Samurai submodels:

• 1986-1995: All Submodels; All Engines;

BOSCH SUPER CLASS OXYGEN SENSOR

Bosch Super Class Oxygen Sensor provides patented catalytically activated fine particle filter that prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination that increase sensors life.

Specifications:

• 1-wire
• 18.9 in. wire length
• Unheated

Features:

• Constructed of premium ceramic technology that incorporates Zirconium or Titania and Yttrium for superior protection against mechanical and thermal shock
• Patented catalytically activated fine particle filter prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination, thereby increasing sensor life
• Prevents premature failure of the catalytic converter
• Snug fitting OE-style silicone boots ensure proper fit, function, and appearance
• Rigorously tested for perfect performance while saving money in fuel costs

Direct plug-in, no cutting or splicing required.

Fits the following 1985-1993 Suzuki Samurai submodels:

• 1991-1993: JL; 4 Cyl 1.3L;
• 1986-1993: JA; 4 Cyl 1.3L;

• 1991-1991: JS; 4 Cyl 1.3L;

• 1985-1989: Base; 4 Cyl 1.3L;

• 1986-1988: JX; 4 Cyl 1.3L;

• 1986-1987: JX SE; 4 Cyl 1.3L;

Fits 4 more submodels. (Show all) Show less info

Denso Oxygen Sensor

Denso First Time Fit® oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

FEATURES:

• SUPERIOR DESIGN — Maximizes engine performance and fuel efficiency while reducing harmful emissions.
• DOUBLE-PROTECTION COVER — Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
• ALUMINUM-OXIDE TRAP LAYER — Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
• STAINLESS STEEL HOUSING — Resists corrosion and contamination with a rugged, watertight body.
• POROUS PTFE FILTER — Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing.

Denso First Time Fit® oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning.

Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

OE Type

Fits the following 1986-1995 Suzuki Samurai submodels:

• 1986-1995: All Submodels; All Engines;

DENSO SUPER CLASS FIRST TIME FIT OXYGEN SENSOR

Denso Super Class First Time Fit Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 1-wire
• 18.82 in. lead wire

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. This part does not require wire cutting.

Fits the following 1985-1995 Suzuki Samurai submodels:

• 1990-1995: JL; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"
• 1991-1993: JA; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"

• 1991-1991: JS; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"

• 1985-1989: Base; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1988: JA; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1988: JX; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1987: JX SE; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

Fits 5 more submodels. (Show all) Show less info

DENSO REGULAR CLASS OXYGEN SENSOR

Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 1-wire
• 11.77 in. lead wire
• Non-flanged

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.

Fits the following 1985-1995 Suzuki Samurai submodels:

• 1990-1995: JL; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"
• 1991-1993: JA; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"

• 1991-1991: JS; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"

• 1985-1989: Base; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1988: JA; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1988: JX; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1987: JX SE; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

Fits 5 more submodels. (Show all) Show less info

WALKER PRODUCTS OXYGEN SENSOR

Walker Products Oxygen Sensors are made to improve engine response and performance. Their typical life expectancy ranges from 30,000 to 60,000 miles if accompanied with regular preventive maintenance while heated oxygen sensors can last 100,000 miles or more.

Specifications:

• 1-wire
• 19 in. length

Features:

• Improves car's engine response and gas mileage
• Effectively lowers emissions upon replacing its tired old oxygen sensor
• Exceeds OE specifications and test requirements

Fits the following 1986-1995 Suzuki Samurai submodels:

• 1990-1995: JL; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated"
• 1991-1993: JA; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated"

• 1991-1991: JS; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated"

• 1989-1989: Base; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated"

• 1986-1988: JA; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated"

• 1986-1988: JX; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated"

• 1986-1987: JX SE; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated"

Fits 5 more submodels. (Show all) Show less info

Walker Oxygen Sensor

Walker Product's Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specifications and test requirements.

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style connectors and wire lengths.
• Ceramic and platinum components.
• High quality stainless steel.

Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1986-1995 Suzuki Samurai submodels:

• 1986-1995: All Submodels; All Engines;

NTK SUPER CLASS OE IDENTICAL OXYGEN SENSOR

NTK Oxygen Sensors are platinum coated for durability, quality, and expertise with innovation in order to control the fuel and ignition system. Optimize vehicle's performance in the areas of emission and fuel economy.

Specifications:

• 1-wire
• 18.5 in. wire length
• Non-flanged
• 0-1 V voltage range
• Thread-in mounting style
• Includes wiring harness

Features:

• Delivers superior fit, form, and function
• Extensively tested to guarantee quality and reliability
• Precision manufactured with a sensing element incorporating NTK's premier technical ceramics

Direct plug-in and requires no cutting or splicing for installation.

Fits the following 1985-1995 Suzuki Samurai submodels:

• 1990-1995: JL; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"
• 1991-1993: JA; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"

• 1991-1991: JS; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"

• 1985-1989: Base; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1988: JA; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1988: JX; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1987: JX SE; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

Fits 5 more submodels. (Show all) Show less info

DELPHI OXYGEN SENSOR, 1-WIRE -- 18.9 in. overall length, 18 x 1.5 mm thread size, 0.88 in. wrench size, round-1 blade connector type, 100,000 miles inspection interval, non-heated; OE connectors and wire length are within 3 inches of OE specifications; Unique sensor coatings to resist contamination and ensures long lasting reliable operation; With 1-year or 12,000-mile Delphi warranty.

Fits the following 1986-1995 Suzuki Samurai submodels:

• 1986-1995: All Submodels; All Engines;
• 1991-1993: JA; All Engines;

• 1991-1991: JL; All Engines;

• 1991-1991: JS; All Engines;

Fits 2 more submodels. (Show all) Show less info

AC DELCO OXYGEN SENSOR, SOLD INDIVIDUALLY

1-wire, non-heated, position 1; A high quality, OE replacement oxygen sensor.

Fits the following 1986-1995 Suzuki Samurai submodels:

• 1990-1995: JL; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"
• 1991-1993: JA; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"

• 1991-1991: JS; 4 Cyl 1.3L; "GAS, FI, Naturally Aspirated, VIN 3"

• 1989-1989: Base; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1988: JA; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1988: JX; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

• 1986-1987: JX SE; 4 Cyl 1.3L; "GAS, CARB, Naturally Aspirated, VIN 5"

Fits 5 more submodels. (Show all) Show less info