Toyota 4runner Exhaust

EXHAUST MANIFOLD -- A high quality, direct fit OE replacement exhaust manifold; Made of tough and durable material for strong resistance to harsh temperature condition, providing long-lasting life and service; Covered by a 1-year unlimited mileage warranty.

Fits the following 1996-2000 Toyota 4Runner submodels:

• 1996-2000: Base; 4 Cyl 2.7L;
• 1998-2000: Limited; 4 Cyl 2.7L;

• 1998-2000: SR5; 4 Cyl 2.7L;

Fits 1 more submodels. (Show all) Show less info

EXHAUST MANIFOLD -- A high quality, direct fit OE replacement exhaust manifold; Made of tough and durable material for strong resistance to harsh temperature condition, providing long-lasting life and service; Proven to last longer than the other exhaust manifold brands that easily wear off; Covered by a 1-year unlimited mileage warranty.

Fits the following 1988-1995 Toyota 4Runner submodels:

• 1988-1989: DLX; 4 Cyl 2.4L; "22R"
• 1988-1989: DLX; 4 Cyl 2.4L; "22REC"

• 1988-1995: SR5; 4 Cyl 2.4L; "22R"

• 1988-1995: SR5; 4 Cyl 2.4L; "22REC"

Fits 2 more submodels. (Show all) Show less info

MAGNAFLOW STAINLESS STEEL CAT-BACK EXHAUST SYSTEM -- 2.5 in. Tubing O.D. Size, 3 in. X 3.5 in. Tip O.D. Size, Dual Same Side Exit Position Behind The Rear Tire, Single System, Includes 5 in. X 11 in. 22 in. Muffler And Dual Polished Stainless Steel Tips, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Fits the following 2003-2006 Toyota 4Runner submodels:

• 2003-2006: Limited; 8 Cyl 4.7L; "Gas, FI, 2UZFE, Naturally Aspirated"
• 2003-2006: SR5; 8 Cyl 4.7L; "Gas, FI, 2UZFE, Naturally Aspirated"

• 2004-2006: Sport; 8 Cyl 4.7L; "Gas, FI, 2UZFE, Naturally Aspirated"

Fits 1 more submodels. (Show all) Show less info

GIBSON SWEPT SIDE EXHAUST, STAINLESS -- This Swept Side Exhaust System Is Made Of High Quality Heavy Duty 409L Stainless Steel Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, Fully Welded Superflow TM Muffler For Better Volume Efficiency, 3.5 T-304 High Polished Stainless Steel Clampless Slash Tip, 2.5 Tailpipe, Zinc Plated 3/8 in. -1/2 in. Factory Style Hangers And Heavy Duty Clamps, Engineered And Dyno-Tested To Improve Acceleration, Maximum Hill Climbing, Towing And Passing Power, Produces Maximum Torque And 15-20 Horsepower Gains At Low-End With Deep Aggressive Tone, Exits Behind The Rear Tire Near Stock Location, Quieter In The Cab, Improves Fuel Economy And Efficiency, Heavy Duty Enough For Off-Road Use, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 2005-2008 Toyota 4Runner submodels:

• 2005-2008: Limited; 8 Cyl 4.7L;
• 2005-2008: SR5; 8 Cyl 4.7L;

• 2005-2008: Sport; 8 Cyl 4.7L;

Fits 1 more submodels. (Show all) Show less info

GIBSON SWEPT SIDE EXHAUST, ALUMINIZED -- This Swept Side Exhaust System Is Made Of High Quality Heavy Duty Aluminized Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, Fully Welded Superflow TM Muffler For Better Volume Efficiency, 2.5 Single Kit With 3 T-304 High Polished Stainless Steel Clampless Slash Tip, Zinc Plated 3/8 in. -1/2 in. Factory Style Hangers And Heavy Duty Clamps, Engineered And Dyno-Tested To Improve Acceleration, Maximum Hill Climbing, Towing And Passing Power, Produces Maximum Torque And 15-20 Horsepower Gains At Low-End With Deep Aggressive Tone, Exits Behind The Rear Tire Near Stock Location, Quieter In The Cab, Improves Fuel Economy And Efficiency, Heavy Duty Enough For Off-Road Use, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 1996 Toyota 4Runner submodels:

• 1996-1996: Base; 4 Cyl 2.7L;

GIBSON SWEPT SIDE EXHAUST, STAINLESS -- This Swept Side Exhaust System Is Made Of High Quality Heavy Duty 409L Stainless Steel Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, Fully Welded Superflow TM Muffler For Better Volume Efficiency, 2.5 Single Kit With 3 T-304 High Polished Stainless Steel Clampless Slash Tip, Zinc Plated 3/8 in. -1/2 in. Factory Style Hangers And Heavy Duty Clamps, Engineered And Dyno-Tested To Improve Acceleration, Maximum Hill Climbing, Towing And Passing Power, Produces Maximum Torque And 15-20 Horsepower Gains At Low-End With Deep Aggressive Tone, Exits Behind The Rear Tire Near Stock Location, Quieter In The Cab, Improves Fuel Economy And Efficiency, Heavy Duty Enough For Off-Road Use, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 1996 Toyota 4Runner submodels:

• 1996-1996: Base; 4 Cyl 2.7L;

GIBSON SWEPT SIDE EXHAUST, ALUMINIZED -- This Swept Side Exhaust System Is Made Of High Quality Heavy Duty Aluminized Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, Fully Welded Superflow TM Muffler For Better Volume Efficiency, 3.5 T-304 High Polished Stainless Steel Clampless Slash Tip, 2.5 Tailpipe, Zinc Plated 3/8 in. -1/2 in. Factory Style Hangers And Heavy Duty Clamps, Engineered And Dyno-Tested To Improve Acceleration, Maximum Hill Climbing, Towing And Passing Power, Produces Maximum Torque And 15-20 Horsepower Gains At Low-End With Deep Aggressive Tone, Exits Behind The Rear Tire Near Stock Location, Quieter In The Cab, Improves Fuel Economy And Efficiency, Heavy Duty Enough For Off-Road Use, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 2004-2008 Toyota 4Runner submodels:

• 2004-2004: Limited; 8 Cyl 4.7L;
• 2004-2004: SR5; 8 Cyl 4.7L;

• 2004-2004: Sport; 8 Cyl 4.7L;

• 2004-2008: Limited; 6 Cyl 4.0L;

• 2004-2008: SR5; 6 Cyl 4.0L;

• 2004-2008: Sport; 6 Cyl 4.0L;

Fits 4 more submodels. (Show all) Show less info

GIBSON SWEPT SIDE EXHAUST, STAINLESS -- This Swept Side Exhaust System Is Made Of High Quality Heavy Duty 409L Stainless Steel Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, Fully Welded Superflow TM Muffler For Better Volume Efficiency, 3.5 T-304 High Polished Stainless Steel Clampless Slash Tip, 2.5 Tailpipe, Zinc Plated 3/8 in. -1/2 in. Factory Style Hangers And Heavy Duty Clamps, Engineered And Dyno-Tested To Improve Acceleration, Maximum Hill Climbing, Towing And Passing Power, Produces Maximum Torque And 15-20 Horsepower Gains At Low-End With Deep Aggressive Tone, Exits Behind The Rear Tire Near Stock Location, Quieter In The Cab, Improves Fuel Economy And Efficiency, Heavy Duty Enough For Off-Road Use, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 2004-2008 Toyota 4Runner submodels:

• 2004-2004: Limited; 8 Cyl 4.7L;
• 2004-2004: SR5; 8 Cyl 4.7L;

• 2004-2004: Sport; 8 Cyl 4.7L;

• 2004-2008: Limited; 6 Cyl 4.0L;

• 2004-2008: SR5; 6 Cyl 4.0L;

• 2004-2008: Sport; 6 Cyl 4.0L;

Fits 4 more submodels. (Show all) Show less info

GIBSON SWEPT SIDE EXHAUST, ALUMINIZED -- This Swept Side Exhaust System Is Made Of High Quality Heavy Duty Aluminized Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, Fully Welded Superflow TM Muffler For Better Volume Efficiency, 3.5 T-304 High Polished Stainless Steel Clampless Slash Tip, 2.5 Tailpipe, Zinc Plated 3/8 in. -1/2 in. Factory Style Hangers And Heavy Duty Clamps, Engineered And Dyno-Tested To Improve Acceleration, Maximum Hill Climbing, Towing And Passing Power, Produces Maximum Torque And 15-20 Horsepower Gains At Low-End With Deep Aggressive Tone, Exits Behind The Rear Tire Near Stock Location, Quieter In The Cab, Improves Fuel Economy And Efficiency, Heavy Duty Enough For Off-Road Use, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 2005-2008 Toyota 4Runner submodels:

• 2005-2008: Limited; 8 Cyl 4.7L;
• 2005-2008: SR5; 8 Cyl 4.7L;

• 2005-2008: Sport; 8 Cyl 4.7L;

Fits 1 more submodels. (Show all) Show less info

BORLA CAT-BACK EXHAUST SYSTEM, T-304 STAINLESS STEEL, NATURAL FINISH -- 50-state legal, C.A.R.B. certified; Increases power by 7 to 15 percent; 2.5 in. main piping diameter, 2.25 in. tailpipe diameter; Single side exit; Single inlet and outlet muffler configuration; Includes aluminized steel muffler and single 4 in. x 8.5 in. polished stainless steel tip with round shape, angle cut, and phantom design; Made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent stainless steel that maintains low decibels and protects the vehicle against burnout; Dyno-proven to yield an increase in flow and power while providing better fuel economy; Insulated to reduce shell temperature for a cooler driver's compartment; Features a patented uninterrupted-flow design and multi-core technology; With longer spike for scavenging to generate maximum power; Easy bolt-on installation; With Borla's million-mile warranty.

Fits the following 1996-1999 Toyota 4Runner submodels:

• 1996-1999: Limited; 6 Cyl 3.4L;
• 1996-1999: SR5; 6 Cyl 3.4L;

• 1998-1999: Limited; 4 Cyl 2.7L;

• 1998-1999: SR5; 4 Cyl 2.7L;

Fits 2 more submodels. (Show all) Show less info

BORLA CAT-BACK EXHAUST SYSTEM, T-304 STAINLESS STEEL, NATURAL FINISH -- 50-state legal, C.A.R.B. certified; Increases power by 7 to 15 percent; 2.5 in. main piping diameter, 2 in. tailpipe diameter; Split side exit; Single inlet and dual outlet muffler configuration; Includes tailpipes, over axle pipe, brackets, intermediate pipe, washers, nuts, Accuseal clamps, aluminized steel muffler, and dual 4 in. x 13 in. polished stainless steel tips with round shape, angle cut, lined, resonated, and rolled edge design; Made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent stainless steel that maintains low decibels and protects the vehicle against burnout; Dyno-proven to yield an increase in flow and power while providing better fuel economy; Insulated to reduce shell temperature for a cooler driver's compartment; Features a patented uninterrupted-flow design and multi-core technology; With longer spike for scavenging to generate maximum power; Easy bolt-on installation; With Borla's million-mile warranty.

Fits the following 2003-2004 Toyota 4Runner submodels:

• 2003-2004: Limited; 6 Cyl 4.0L;
• 2003-2004: Limited; 8 Cyl 4.7L;

• 2003-2004: SR5; 6 Cyl 4.0L;

• 2003-2004: SR5; 8 Cyl 4.7L;

• 2004-2004: Sport; 6 Cyl 4.0L;

• 2004-2004: Sport; 8 Cyl 4.7L;

Fits 4 more submodels. (Show all) Show less info

BORLA CAT-BACK EXHAUST SYSTEM -- 2 Inlet Diameter, 2.25 Outlet Diameter, 4 x 13" Single Round Rolled Angle-Cut Lined Resonated Tip, 2.5" Split Side Exit, Made From Aircraft-Quality, 100% T-304 Austenitic And Sound-Absorbing Mandrel-Bent Stainless Steel That Maintains Low Decibels And Protects Against Burnout, Dyno-Proven To Yield An Increase Of 7-15% In Horsepower While Providing Better Fuel Economy, Insulated To Reduce Shell Temperature For A Cooler Driver's Compartment, Increases Flow And Power, Features A Patented Uninterrupted-Flow Design And Multi-Core Technology, With Longer Spike For Scavenging To Generate Maximum Power, With Manufacturer's Million-Mile Warranty

Fits the following 2005-2006 Toyota 4Runner submodels:

• 2005-2006: Limited; 8 Cyl 4.7L; "2UZFE"
• 2005-2006: SR5; 8 Cyl 4.7L; "2UZFE"

• 2005-2006: Sport; 8 Cyl 4.7L; "2UZFE"

Fits 1 more submodels. (Show all) Show less info

DORMAN EXHAUST MANIFOLD KIT -- Includes three studs, three nuts, one manifold gasket, one flange gasket, and heat shield; Cast iron construction; Engineered to perform better than the original OE design; Transports extremely hot exhaust gases with a temperature of up to 1400 degrees Fahrenheit from the cylinder head to the exhaust piping; Provides mounting for oxygen sensors, A.I.R. piping, and EGR piping; Seals the engine head and exhaust piping to prevent fumes and noise from escaping the engine compartment; Application-specific; Not for use in California; Replacement for OE part number 1714175030; With Dorman's limited lifetime warranty.

Fits the following 1996-2000 Toyota 4Runner submodels:

• 1996-1998: Base; 4 Cyl 2.7L; "GAS, FI, 3RZFE, VIN M"
• 1998-1998: Limited; 4 Cyl 2.7L; "GAS, FI, 3RZFE, VIN M"

• 1998-1998: SR5; 4 Cyl 2.7L; "GAS, FI, 3RZFE, VIN M"

• 1999-1999: Base; 4 Cyl 2.7L; "GAS, FI, 3RZFE"

• 1999-1999: Limited; 4 Cyl 2.7L; "GAS, FI, 3RZFE"

• 1999-1999: SR5; 4 Cyl 2.7L; "GAS, FI, 3RZFE"

• 2000-2000: Base; 4 Cyl 2.7L; "GAS, FI"

• 2000-2000: Limited; 4 Cyl 2.7L; "GAS, FI"

• 2000-2000: SR5; 4 Cyl 2.7L; "GAS, FI"

Fits 7 more submodels. (Show all) Show less info

Fits the following 1984-1995 Toyota 4Runner submodels:

• 1984-1984: All Submodels; All Engines;
• 1985-1988: DLX; 4 Cyl 2.4L; "22REC"

• 1985-1988: SR5; 4 Cyl 2.4L; "22REC"

• 1989-1989: DLX; 4 Cyl 2.4L;

• 1989-1995: SR5; 4 Cyl 2.4L;

Fits 3 more submodels. (Show all) Show less info

Kit: see contents

Fits the following 1996-2000 Toyota 4Runner submodels:

• 1996-2000: Base; 4 Cyl 2.7L;
• 1998-2000: Limited; 4 Cyl 2.7L;

• 1998-2000: SR5; 4 Cyl 2.7L;

Fits 1 more submodels. (Show all) Show less info