Toyota Pickup Brake Pads

EBC ULTIMAX BRAKE PAD SET -- R90 tested and approved; Made from premium quality friction material with part metallic content to greatly reduce chances of brake vibration and improve braking performance; Features brake-in surface coating that provides instant brake efficiency on installation and conditions rotor surface removing glaze and scale; Shimmed, chamfered, and slotted preventing heat expansion cracks and reducing brake noise; With unique powdercoated finish on both pad and back plate giving lifetime resistance to corrosion and preventing moisture ingress; Produces minimal dust and is the perfect choice for the urban or daily driver; Designed for general replacement use on cars, vans, and SUV's; With EBC's limited 6-month or 10,000-mile warranty.

Fits the following 1989-1995 Toyota Pickup submodels:

• 1989-1995: All Submodels; All Engines;

EBC ULTIMAX BRAKE PAD SET -- R90 tested and approved; Made from premium quality friction material with part metallic content to greatly reduce chances of brake vibration and improve braking performance; Features brake-in surface coating that provides instant brake efficiency on installation and conditions rotor surface removing glaze and scale; Shimmed, chamfered, and slotted preventing heat expansion cracks and reducing brake noise; With unique powdercoated finish on both pad and back plate giving lifetime resistance to corrosion and preventing moisture ingress; Produces minimal dust and is the perfect choice for the urban or daily driver; Designed for general replacement use on cars, vans, and SUV's; With EBC's limited 6-month or 10,000-mile warranty.

Fits the following 1989-1993 Toyota Pickup submodels:

• 1989-1993: All Submodels; All Engines;

CENTRIC POSI QUIET CERAMIC BRAKE PAD SET -- Manufactured using the same positive molding process used by OE suppliers which assures consistent friction material density throughout the pad resulting in even wear and braking power; 100 percent asbestos free; Features precision cut or shaved backing plates with mechanically attached and application specific shims that provide superior noise abatement; Positively molded and scorched to enhance consistent friction performance across a wide temperature range; With Centric's limited 90-day or 3,000-mile warranty.

Fits the following 1988-1995 Toyota Pickup submodels:

• 1988-1995: DLX; 6 Cyl 3.0L; "FI, 3VZE, VIN V"
• 1988-1995: SR5; 6 Cyl 3.0L; "FI, 3VZE, VIN V"

• 1988-1993: Base; 6 Cyl 3.0L; "FI, 3VZE, VIN V"

• 1989-1990: DLX; 4 Cyl 2.4L; "CARB, 22R, VIN R"

• 1989-1995: DLX; 4 Cyl 2.4L; "FI, 22RE, VIN R"

• 1989-1993: SR5; 4 Cyl 2.4L; "FI, 22RE, VIN R"

• 1992-1993: Base; 4 Cyl 2.4L; "FI, 22RE, VIN R"

Fits 5 more submodels. (Show all) Show less info

BENDIX IQ IMPORT QUIET BRAKE PAD SET, SEMI-METALLIC -- Comes with a tube of brake lubricant for added insurance against brake noise; Asbestos-free to provide superior braking and shorter stopping distances; Features integrally molded attachments to mirror OE including shims for noise abatement; The titanium metallic coating provides outstanding initial stopping power; Utilizes advanced-engineered friction formula that provides quieter braking as original equipment; Offers shorter stopping distances for an added measure of safety and long brake pad life.

Fits the following 1979-1988 Toyota Pickup submodels:

• 1979-1980: Base; 4 Cyl 2.2L; "GAS, CARB, 20R, VIN R"
• 1979-1980: SR5; 4 Cyl 2.2L; "GAS, CARB, 20R, VIN R"

• 1979-1983: DLX; 4 Cyl 2.2L; "GAS, CARB, 20R, VIN R"

• 1981-1984: Base; 4 Cyl 2.4L; "GAS, CARB, 22R, VIN R"

• 1981-1985: SR5; 4 Cyl 2.4L; "GAS, CARB, 22R, VIN R"

• 1981-1987: DLX; 4 Cyl 2.4L; "GAS, CARB, 22R, VIN R"

• 1983-1983: SR5; 4 Cyl 2.2L; "DIESEL, FI, L, VIN L"

• 1984-1988: Base; 4 Cyl 2.4L; "GAS, FI, 22REC, VIN R"

• 1985-1985: DLX; 4 Cyl 2.4L; "DIESEL, FI, VIN L"

• 1985-1988: SR5; 4 Cyl 2.4L; "GAS, FI, 22REC, VIN R"

• 1986-1987: Base; 4 Cyl 2.4L; "GAS, FI, 22RTEC, Turbocharged, VIN R"

• 1987-1988: DLX; 4 Cyl 2.4L; "GAS, FI, 22REC, VIN R"

Fits 10 more submodels. (Show all) Show less info

BENDIX TITANIUMETALLIC BRAKE PAD SET, SEMI-METALLIC -- Asbestos-free to provide superior braking and shorter stopping distances; Requires shorter break-in period but delivers better brake performance with lesser noise; Features an all-new premium quality semi-metallic friction formulation and blue TitaniuMetallic II coating; Shimmed for added noise abatement.

Fits the following 1989-1994 Toyota Pickup submodels:

• 1989-1989: Base; 6 Cyl 3.0L; "GAS, FI, 3VZE, VIN V"
• 1989-1989: DLX; 6 Cyl 3.0L; "GAS, FI, 3VZE, VIN V"

• 1989-1989: SR5; 6 Cyl 3.0L; "GAS, FI, 3VZE, VIN V"

• 1990-1990: Base; 4 Cyl 2.4L; "GAS, CARB, 22R, VIN R"

• 1990-1990: DLX; 4 Cyl 2.4L; "GAS, CARB, 22R, VIN R"

• 1990-1994: Base; 4 Cyl 2.4L; "GAS, FI, 22RE, VIN R"

• 1990-1994: DLX; 4 Cyl 2.4L; "GAS, FI, 22RE, VIN R"

• 1990-1993: SR5; 4 Cyl 2.4L; "GAS, FI, 22RE, VIN R"

• 1993-1993: RN02; 4 Cyl 2.4L; "GAS, FI, VIN R"

Fits 7 more submodels. (Show all) Show less info

Fits the following 1988-1995 Toyota Pickup submodels:

• 1988-1995: All Submodels; All Engines;

ACT Ceramic w/ Shims

Fits the following 1989-1995 Toyota Pickup submodels:

• 1989-1995: All Submodels; All Engines;
• 1989-1995: DLX; All Engines;

• 1990-1993: Base; 6 Cyl 3.0L; "3VZE"

• 1990-1995: DLX; 6 Cyl 3.0L; "3VZE"

• 1990-1995: SR5; 6 Cyl 3.0L; "3VZE"

Fits 3 more submodels. (Show all) Show less info

AKEBONO PROACT ULTRA-PREMIUM BRAKE PAD SET, CERAMIC -- Includes high-temperature resistant moly lube; Comes with precision-fit steel backing plates for less noise and precision-fit shims to avoid shim migration; Best replacement for restoring OE ceramic pad performance and ideal for upgrading conventional brakes; Made from carefully selected materials and rotor-friendly asbestos-free formulations that minimize or virtually eliminate dusting, brake squealing, groaning, and vibration; Has black powdercoat finish for OE-level corrosion resistance; 100 percent chamfered and slotted to further enhance NVH control; Offers improved pad wear performance compared to traditional brake pads; Post cured and heat scorched to ensure highest initial effectiveness requiring no break-in procedures but exclusive only for front formulations.

Fits the following 1989-1995 Toyota Pickup submodels:

• 1989-1990: Base; 4 Cyl 2.4L; "GAS, CARB, 22R, VIN R"
• 1989-1990: DLX; 4 Cyl 2.4L; "GAS, CARB, 22R, VIN R"

• 1989-1995: Base; 4 Cyl 2.4L; "GAS, FI, 22RE, VIN R"

• 1989-1995: DLX; 4 Cyl 2.4L; "GAS, FI, 22RE, VIN R"

• 1989-1995: DLX; 6 Cyl 3.0L; "GAS, FI, 3VZE, VIN V"

• 1989-1995: SR5; 6 Cyl 3.0L; "GAS, FI, 3VZE, VIN V"

• 1989-1993: Base; 6 Cyl 3.0L; "GAS, FI, 3VZE, VIN V"

• 1989-1993: SR5; 4 Cyl 2.4L; "GAS, FI, 22RE, VIN R"

• 1993-1993: RN02; 4 Cyl 2.4L; "GAS, FI, VIN R"

Fits 7 more submodels. (Show all) Show less info

ACT Ceramic w/ Shims

Fits the following 1988-1995 Toyota Pickup submodels:

• 1988-1995: All Submodels; All Engines;

Pro-ACT Ceramic w/Shims

Fits the following 1984-1995 Toyota Pickup submodels:

• 1984-1988: All Submodels; All Engines;
• 1989-1990: Base; All Engines;

• 1991-1995: Base; 4 Cyl 2.4L;

• 1991-1995: DLX; 4 Cyl 2.4L;

• 1992-1993: SR5; 4 Cyl 2.4L;

• 1993-1993: RN02; 4 Cyl 2.4L;

Fits 4 more submodels. (Show all) Show less info

Pro-ACT Ceramic w/Shims

Fits the following 1989-1995 Toyota Pickup submodels:

• 1989-1995: All Submodels; All Engines;
• 1989-1995: DLX; All Engines;

• 1990-1993: Base; 6 Cyl 3.0L; "3VZE"

• 1990-1995: DLX; 6 Cyl 3.0L; "3VZE"

• 1990-1995: SR5; 6 Cyl 3.0L; "3VZE"

Fits 3 more submodels. (Show all) Show less info

Pro-ACT Ceramic w/Shims

Fits the following 1988-1995 Toyota Pickup submodels:

• 1988-1995: All Submodels; All Engines;

AKEBONO PREMIUM BRAKE PAD SET, CERAMIC -- Comes with precision-fit steel backing plate for precise caliper fit; Made with vehicle-optimized ceramic formulations to generate less wheel dust and to provide further comfort through the control of noise, vibration, and harshness; Chamfered and slotted as per OE specifications.

Fits the following 1989-1995 Toyota Pickup submodels:

• 1989-1990: Base; 4 Cyl 2.4L; "CARB, 22R, VIN R"
• 1989-1990: DLX; 4 Cyl 2.4L; "CARB, 22R, VIN R"

• 1989-1995: Base; 4 Cyl 2.4L; "FI, 22RE, VIN R"

• 1989-1995: DLX; 4 Cyl 2.4L; "FI, 22RE, VIN R"

• 1989-1995: DLX; 6 Cyl 3.0L; "FI, 3VZE, VIN V"

• 1989-1995: SR5; 6 Cyl 3.0L; "FI, 3VZE, VIN V"

• 1989-1993: Base; 6 Cyl 3.0L; "FI, 3VZE, VIN V"

• 1989-1993: SR5; 4 Cyl 2.4L; "FI, 22RE, VIN R"

Fits 6 more submodels. (Show all) Show less info

AKEBONO PREMIUM BRAKE PAD SET, CERAMIC -- Comes with precision-fit steel backing plate for precise caliper fit; Made with vehicle-optimized ceramic formulations to generate less wheel dust and to provide further comfort through the control of noise, vibration, and harshness; Chamfered and slotted as per OE specifications.

Fits the following 1989-1995 Toyota Pickup submodels:

• 1989-1989: Base; 4 Cyl 2.4L; "CARB, 22R, VIN R"
• 1989-1990: DLX; 4 Cyl 2.4L; "CARB, 22R, VIN R"

• 1989-1993: Base; 6 Cyl 3.0L; "FI, 3VZE, VIN V"

• 1989-1995: Base; 4 Cyl 2.4L; "FI, 22RE, VIN R"

• 1989-1995: DLX; 4 Cyl 2.4L; "FI, 22RE, VIN R"

• 1989-1995: DLX; 6 Cyl 3.0L; "FI, 3VZE, VIN V"

• 1989-1995: SR5; 6 Cyl 3.0L; "FI, 3VZE, VIN V"

• 1989-1993: SR5; 4 Cyl 2.4L; "FI, 22RE, VIN R"

Fits 6 more submodels. (Show all) Show less info

AKEBONO PROACT ULTRA-PREMIUM BRAKE PAD SET, CERAMIC -- Includes high-temperature resistant moly lube; Comes with precision-fit steel backing plates for less noise and precision-fit shims to avoid shim migration; Best replacement for restoring OE ceramic pad performance and ideal for upgrading conventional brakes; Made from carefully selected materials and rotor-friendly asbestos-free formulations that minimize or virtually eliminate dusting, brake squealing, groaning, and vibration; Has black powdercoat finish for OE-level corrosion resistance; 100 percent chamfered and slotted to further enhance NVH control; Offers improved pad wear performance compared to traditional brake pads; Post cured and heat scorched to ensure highest initial effectiveness requiring no break-in procedures but exclusive only for front formulations.

Fits the following 1989-1995 Toyota Pickup submodels:

• 1989-1989: Base; 4 Cyl 2.4L; "GAS, CARB, 22R, VIN R"
• 1989-1990: DLX; 4 Cyl 2.4L; "GAS, CARB, 22R, VIN R"

• 1989-1993: Base; 6 Cyl 3.0L; "GAS, FI, 3VZE, VIN V"

• 1989-1995: Base; 4 Cyl 2.4L; "GAS, FI, 22RE, VIN R"

• 1989-1995: DLX; 4 Cyl 2.4L; "GAS, FI, 22RE, VIN R"

• 1989-1995: DLX; 6 Cyl 3.0L; "GAS, FI, 3VZE, VIN V"

• 1989-1995: SR5; 6 Cyl 3.0L; "GAS, FI, 3VZE, VIN V"

• 1989-1993: SR5; 4 Cyl 2.4L; "GAS, FI, 22RE, VIN R"

• 1993-1993: RN02; 4 Cyl 2.4L; "GAS, FI, VIN R"

Fits 7 more submodels. (Show all) Show less info