Toyota Tercel Brakes

EBC ULTIMAX BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Replace your worn out brake pads with new EBC Ultimax Brake Pads. Manufactured according to OE specifications, these long lasting pads completely eliminate brake judder and reduce brake disc wear by up to 50 percent. It's common practice to replace stock discs when replacing pads, but with Ultimax, your discs can last two pad sets. This means that with EBC Ultimax Brake Pads, you get to enjoy big savings and high performance braking over a good period of time.

Features:

• Manufactured from a semi-metallic compound with aramid soft fibers
• With center slots and edge chamfers plus noise reduction shims on the reverse
• EBC red Brake-In surface coating conditions rotors after installation allowing pads to quickly deliver their stopping power
• Hardware and wear leads included where fitted as standard by factory
• Long lasting high friction pad designed for non-sport urban driving on all sedans, SUVs, and light trucks

Install these brake pads with the help of EBC's Instructional Video P/N E35DVD083 (sold separately).

Fits the following 1983-1998 Toyota Tercel submodels:

• 1997-1998: CE; 4 Cyl 1.5L;
• 1987-1996: DX; 4 Cyl 1.5L;

• 1983-1996: STD; 4 Cyl 1.5L;

• 1991-1994: LE; 4 Cyl 1.5L;

• 1990-1994: S; 4 Cyl 1.5L;

• 1983-1994: DLX; 4 Cyl 1.5L;

• 1988-1990: EZ; 4 Cyl 1.5L;

• 1984-1990: Base; 4 Cyl 1.5L;

• 1983-1988: SR5; 4 Cyl 1.5L;

Fits 7 more submodels. (Show all) Show less info

EBC GREENSTUFF 2000 SERIES BRAKE PADS, ORGANIC, 2-WHEEL SET

Designed especially for sport compacts, muscle cars, and premium American- and European-built sedans, the EBC Greenstuff 2000 line of brake pads is the perfect choice for high performance braking during spirited street driving. Made with organic man-made aramid fibers such as DuPont Kevlar or Twaron, Greenstuff 2000 boasts of a nominal friction coefficient of 0.55. Additionally, each pad has its surface finished with EBC Brake-In coating to guarantee you a high initial brake effect. With Greenstuff 2000, you are free to cruise leisurely along highways without worry.

Features:

• Emits less dust than equivalent semi-metallic pads
• Proven in tests to stop a vehicle 20 feet sooner than stock pads
• Reduces heat fade and rotor wear
• Fully shimmed, chamfered, and slotted for silent braking
• Features EBC Brake-In surface coating to accelerate pad bed in after installation
• Greenstuff pads are for spirited street driving

Install these brake pads with the help of EBC's instructional video P/N E35DVD083 (sold separately).

Fits the following 1983-1998 Toyota Tercel submodels:

• 1997-1998: CE; 4 Cyl 1.5L;
• 1987-1996: DX; 4 Cyl 1.5L;

• 1983-1996: STD; 4 Cyl 1.5L;

• 1991-1994: LE; 4 Cyl 1.5L;

• 1990-1994: S; 4 Cyl 1.5L;

• 1983-1994: DLX; 4 Cyl 1.5L;

• 1988-1990: EZ; 4 Cyl 1.5L;

• 1984-1990: Base; 4 Cyl 1.5L;

• 1983-1988: SR5; 4 Cyl 1.5L;

Fits 7 more submodels. (Show all) Show less info

EBC YELLOWSTUFF 4000 R SERIES BRAKE PADS, ORGANIC, 2-WHEEL SET

Be it for muscle cars used for racing or for trucks that tow trailers, EBC Yellowstuff 4000 R Series Brake Pads offer absolutely reliable braking power right from the cold up to intensely high temperatures. They are highly resistant to brake fade under load, totally resistant to rotor vibration, and feature EBC's Brake-In coating for high initial brake effect. These pads may not have a low dust rating, but if you're looking for pads that stick like glue, you cannot go wrong with EBC Yellowstuff 4000 R Series Brake Pads.

Features:

• Intense resistance to fade under load
• Utterly resists brake disc vibration
• Exhibits a dust rating similar to OEM parts
• Shimmed to reduce noise
• Slotted to avoid heat cracks
• Chamfered to minimize low speed noise
• Coated with Brake-In compound for faster break-in and greater initial braking effect

Install these brake pads with the help of EBC's Instructional Video P/N E35DVD083 (sold separately).

Fits the following 1983-1998 Toyota Tercel submodels:

• 1997-1998: CE; 4 Cyl 1.5L;
• 1987-1996: DX; 4 Cyl 1.5L;

• 1983-1996: STD; 4 Cyl 1.5L;

• 1991-1994: LE; 4 Cyl 1.5L;

• 1990-1994: S; 4 Cyl 1.5L;

• 1983-1994: DLX; 4 Cyl 1.5L;

• 1988-1990: EZ; 4 Cyl 1.5L;

• 1984-1990: Base; 4 Cyl 1.5L;

• 1983-1988: SR5; 4 Cyl 1.5L;

Fits 7 more submodels. (Show all) Show less info

EBC REDSTUFF 3000 BRAKE PADS, CERAMIC, 2-WHEEL SET

Amazing stopping power is guaranteed with EBC Redstuff 3000 Brake Pad Set Series. Especially engineered for high-horse power imports, muscle cars, and prestige European cars, this product line has been proven to increase stopping power by a whopping 30 percent! Featuring a Kevlar-based compound that is enhanced with ceramic particles, Redstuff 3000 Pads have a higher-than-OEM heat threshold for resistance against brake fade, incredible bite from cold, a low dust rating, and long product life. All of these features make Redstuff Pads perfect for repeated heavy braking during fast street use. With EBC Redstuff 3000 Brake Pads, you have full confidence in the braking power of your vehicle.

Features:

• Asbestos-free
• Made from a innovative blend of Kevlar fibers and enhanced ceramic particles
• Produces 60-90 percent less dust than OE pads
• Brake bite from cold is as good as OE or better
• Brake performance only increases as the pads heat up
• Built with shims, slots, and chamfers for silent braking
• Coated with Brake-In compound for faster break-in and greater initial braking effect

Install these brake pads with the help of EBC's instructional video P/N E35DVD083 (sold separately).

Fits the following 1983-1998 Toyota Tercel submodels:

• 1997-1998: CE; 4 Cyl 1.5L;
• 1987-1996: DX; 4 Cyl 1.5L;

• 1983-1996: STD; 4 Cyl 1.5L;

• 1991-1994: LE; 4 Cyl 1.5L;

• 1990-1994: S; 4 Cyl 1.5L;

• 1983-1994: DLX; 4 Cyl 1.5L;

• 1988-1990: EZ; 4 Cyl 1.5L;

• 1984-1990: Base; 4 Cyl 1.5L;

• 1983-1988: SR5; 4 Cyl 1.5L;

Fits 7 more submodels. (Show all) Show less info

CENTRIC PREMIUM BRAKE DISC, FLOATING TYPE, VENTED, SOLD INDIVIDUALLY

Get the most out of your stock braking system with Centric Premium OE replacement brake discs. These rotors are manufactured using OE specifications and processes under strict QS and ISO quality standards to give you an ever reliable braking performance. Furthermore, they are given machined finishes for smoother and cleaner appearance.

Specifications:

• 4 x 100 mm bolt pattern
• 238 mm disc diameter
• 14.5 mm bolt size
• 17 mm minimum thickness

Features:

• Manufactured to meet QS and ISO quality system standards
• Utilizes an electrocoating finish that provides long lasting corrosion protection
• Designed to withstand 400 hours of salt water exposure without rusting
• Double disc grinding ensures parallelism, eliminates run out, and provides near perfect disc thickness
• The double disc grinding also leaves a non-directional finish on the friction surface area for more effective pad-disc break in while providing quieter and smoother stops
• Center-split core casting offers proper heat transfer and thermal efficiency for superior braking and safety
• 100 percent fully machined hat delivers better disc balance
• Mill-corrected to a tolerance of less than 2 oz. per inch

Fits the following 1991-1998 Toyota Tercel submodels:

• 1991-1998: All Submodels; All Engines;

CENTRIC C-TEK BRAKE DISC, SOLID, PLAIN SURFACE, SOLD INDIVIDUALLY

Centric C-Tek Disc repairs the brake system and reduces the fast wear and tear of the break pad set. It's manufactured with quality G3000 metallurgy, and designed with non-directional finish to allow good braking performance, pedal feel and quiet operation. Assembled to exact tolerances, and undergone rigorous testing, this OE comparable rotor provides factory standards for accurate fitment and OE-like specifications.

Item Specifications:

• 4 x 3.78 in. (4 x 96 mm) bolt pattern
• 8.03 in. (204 mm) disc diameter
• 10 x 1.25 mm bolt size
• 30 mm height
• 76 mm hub reg
• 10 mm nom. thickness
• 9 mm min. thickness

Item Details:

• Cast iron disc material
• Non-directional disc finish
• Natural hat finish

Features and Benefits:

• Widest range of application coverage in the aftermarket
• Double disc ground finish
• Machined non-friction surface

Fits the following 1980 Toyota Tercel submodels:

• 1980-1980: DLX; 4 Cyl 1.5L;
• 1980-1980: SR5; 4 Cyl 1.5L;

• 1980-1980: STD; 4 Cyl 1.5L;

Fits 1 more submodels. (Show all) Show less info

CENTRIC C-TEK BRAKE DISC, STANDARD, VENTED, SOLD INDIVIDUALLY -- 4 x 96 mm PCD bolt pattern; 226 mm outer diameter; 10 mm nominal thickness; 9 mm minimum thickness; This is a high quality OE replacement brake disc.

Fits the following 1981-1982 Toyota Tercel submodels:

• 1981-1982: All Submodels; All Engines;

CENTRIC C-TEK BRAKE DISC, STANDARD, VENTED, SOLD INDIVIDUALLY -- 4 x 100 mm PCD bolt pattern; 243 mm outer diameter; 11.1 mm nominal thickness; 10 mm minimum thickness; This is a high quality OE replacement brake disc.

Fits the following 1983-1990 Toyota Tercel submodels:

• 1983-1990: All Submodels; All Engines;

CENTRIC SPORTSTOP BRAKE DISC, CROSS-DRILLED, VENTED, SOLD INDIVIDUALLY

Add extra bite to your braking performance with Centric SportStop Brake Discs. These have application-specific slotting and/or drilling patterns CNC-machined into the rotors to provide optimized gas, dust, and heat reduction. Additionally, these enhance braking performance in wet conditions by effectively drawing water away from the rotor surface. Great for autocross and street use, these discs become even better when paired with high performance brake pads, such as Centric Street Performance Brake Friction.

Specifications:

• 4 lugs

Features:

• Made from a material that is a direct descendant of the patented StopTech AeroRotor
• Prevents glazing of the pads
• Increases pad bite
• Improves wet and dry braking performance
• Increased molybdenum content that extends reliability, prolongs service life, and helps reduce NVH issues
• Delivers superior resistance to cracking due to thermal stress

Fits the following 1991-1998 Toyota Tercel submodels:

• 1991-1998: All Submodels; All Engines;

CENTRIC C-TEK BRAKE DISC, STANDARD, VENTED, SOLD INDIVIDUALLY -- 4 x 100 mm PCD bolt pattern; 238 mm outer diameter; 18 mm nominal thickness; 17 mm minimum thickness; This is a high quality OE replacement brake disc.

Fits the following 1991-1998 Toyota Tercel submodels:

• 1991-1998: All Submodels; All Engines;

CENTRIC POWER SLOT BRAKE DISC, SLOTTED, VENTED, SOLD INDIVIDUALLY

Improve the stopping power of your truck, SUV, or severe duty vehicle with Centric Power Slot Brake Discs. These entry-level performance upgrades offer superior and reliable braking even under hard driving conditions as they have a special feature called Vac-U-Slots. Vac-U-Slots help keep gas, heat, and dust from building up and inhibiting braking power. In wet conditions, these slots push water off the rotor surface to ensure reliable braking, and since the Vac-U-Slots are milled to the disc's minimum thickness, they also serve as a visual wear indicator.

Specifications:

• 4 lugs

Features:

• Offers consistent braking even under hard driving conditions
• Provides reliable braking under wet conditions
• Delivers superior resistance to cracking due to thermal stress

Fits the following 1991-1998 Toyota Tercel submodels:

• 1991-1998: All Submodels; All Engines;

CENTRIC SPORTSTOP BRAKE DISC, CROSS-DRILLED, VENTED, SOLD INDIVIDUALLY

Add extra bite to your braking performance with Centric SportStop Brake Discs. These have application-specific slotting and/or drilling patterns CNC-machined into the rotors to provide optimized gas, dust, and heat reduction. Additionally, these enhance braking performance in wet conditions by effectively drawing water away from the rotor surface. Great for autocross and street use, these discs become even better when paired with high performance brake pads, such as Centric Street Performance Brake Friction.

Specifications:

• 4 lugs

Features:

• Made from a material that is a direct descendant of the patented StopTech AeroRotor
• Prevents glazing of the pads
• Increases pad bite
• Improves wet and dry braking performance
• Increased molybdenum content that extends reliability, prolongs service life, and helps reduce NVH issues
• Delivers superior resistance to cracking due to thermal stress

Fits the following 1991-1998 Toyota Tercel submodels:

• 1991-1998: All Submodels; All Engines;

CENTRIC POWER SLOT BRAKE DISC, SLOTTED, VENTED, SOLD INDIVIDUALLY

Improve the stopping power of your truck, SUV, or severe duty vehicle with Centric Power Slot Brake Discs. These entry-level performance upgrades offer superior and reliable braking even under hard driving conditions as they have a special feature called Vac-U-Slots. Vac-U-Slots help keep gas, heat, and dust from building up and inhibiting braking power. In wet conditions, these slots push water off the rotor surface to ensure reliable braking, and since the Vac-U-Slots are milled to the disc's minimum thickness, they also serve as a visual wear indicator.

Specifications:

• 4 lugs

Features:

• Offers consistent braking even under hard driving conditions
• Provides reliable braking under wet conditions
• Delivers superior resistance to cracking due to thermal stress

Fits the following 1991-1998 Toyota Tercel submodels:

• 1991-1998: All Submodels; All Engines;

CENTRIC PREMIUM SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Premium Semi-Metallic Brake Pads with shims are manufactured using the same positive molding process used by leading automotive manufacturers. Centric Premium Semi-Metallic Brake Pads with shims provide superior stopping power with minimal dusting and noise. These brake pads are formulated for increased service life while maintaining high friction levels at all operating temperatures.

Features:

• High friction level at all temperatures
• 100% shimmed
• Stable friction performance across wide temperature range
• Positive Mold technology
• 100% asbestos and copper free compounds
• Precision cut backing plates
• High anti dust capability
• Application specific OE style shims

Item Details:

• Includes shims

Fits the following 1983-1998 Toyota Tercel submodels:

• 1983-1998: All Submodels; All Engines;

CENTRIC POSI QUIET SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Semi-Metallic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos and copper free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

Fits the following 1983-1998 Toyota Tercel submodels:

• 1983-1998: All Submodels; All Engines;