Vw Jetta Car Bra

LEBRA CUSTOM FRONT END COVER, VINYL, BLACK

The easiest way to protect your vehicle from unexpected road damage. These LeBra custom front end covers have stylish protection that makes your vehicle look great.

Features:

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
• Easy installation with no tools required
• All parts are pre-attached

Fits the following 2005-2010 Volkswagen Jetta submodels:

• 2008-2010: S; All Engines;
• 2008-2010: SE; All Engines;

• 2008-2010: SEL; All Engines;

• 2007-2010: Wolfsburg Edition; All Engines;

• 2005-2010: TDI; All Engines;

• 2005-2009: GLI; All Engines;

• 2006-2007: 2.0T; All Engines;

• 2005-2007: 2.5; All Engines;

• 2006-2006: Value Edition; All Engines;

• 2005-2005: GL TDI; All Engines;

• 2005-2005: GL; All Engines;

• 2005-2005: GLS TDI; All Engines;

• 2005-2005: GLS; All Engines;

Fits 11 more submodels. (Show all) Show less info

LEBRA CUSTOM HOOD PROTECTOR, VINYL, BLACK

The stylish and affordable way to protect your vehicle's hood from common road hazards such as rock chips, bugs, and tar.

Features:

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

Fits the following 2005-2010 Volkswagen Jetta submodels:

• 2008-2010: S; All Engines;
• 2008-2010: SE; All Engines;

• 2008-2010: SEL; All Engines;

• 2007-2010: Wolfsburg Edition; All Engines;

• 2005-2010: TDI; All Engines;

• 2005-2009: GLI; All Engines;

• 2006-2007: 2.0T; All Engines;

• 2005-2007: 2.5; All Engines;

• 2006-2006: Value Edition; All Engines;

• 2005-2005: GL TDI; All Engines;

• 2005-2005: GL; All Engines;

• 2005-2005: GLS TDI; All Engines;

• 2005-2005: GLS; All Engines;

Fits 11 more submodels. (Show all) Show less info

LEBRA CUSTOM FRONT END COVER, VINYL, BLACK

The easiest way to protect your vehicle from unexpected road damage. These LeBra custom front end covers have stylish protection that makes your vehicle look great.

Features:

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
• Easy installation with no tools required
• All parts are pre-attached

Fits the following 1999-2005 Volkswagen Jetta submodels:

• 2005-2005: 2.5; All Engines;
• 2005-2005: GL TDI; All Engines;

• 2005-2005: GLS TDI; All Engines;

• 2002-2005: GLI; All Engines;

• 1999-2005: GL; All Engines;

• 1999-2005: GLS; All Engines;

• 1999-2005: TDI; All Engines;

• 1999-2003: GLX; All Engines;

• 1999-1999: Wolfsburg Edition; All Engines;

Fits 7 more submodels. (Show all) Show less info

LEBRA CUSTOM FRONT END COVER, VINYL, BLACK

The easiest way to protect your vehicle from unexpected road damage. These LeBra custom front end covers have stylish protection that makes your vehicle look great.

Features:

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
• Easy installation with no tools required
• All parts are pre-attached

Fits the following 1993-1999 Volkswagen Jetta submodels:

• 1998-1999: TDI; All Engines;
• 1996-1999: Wolfsburg Edition; All Engines;

• 1994-1999: GLX; All Engines;

• 1993-1999: GL; All Engines;

• 1993-1999: GLS; All Engines;

• 1998-1998: K2; All Engines;

• 1997-1998: GT; All Engines;

• 1997-1997: Jazz; All Engines;

• 1996-1996: Trek; All Engines;

• 1995-1995: Celebration Edition; All Engines;

• 1995-1995: City; All Engines;

• 1994-1994: Limited Edition; All Engines;

Fits 10 more submodels. (Show all) Show less info

LEBRA CUSTOM HOOD PROTECTOR, VINYL, BLACK

The stylish and affordable way to protect your vehicle's hood from common road hazards such as rock chips, bugs, and tar.

Features:

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

Fits the following 1993-1999 Volkswagen Jetta submodels:

• 1998-1999: TDI; All Engines;
• 1996-1999: Wolfsburg Edition; All Engines;

• 1994-1999: GLX; All Engines;

• 1993-1999: GL; All Engines;

• 1993-1999: GLS; All Engines;

• 1998-1998: K2; All Engines;

• 1997-1998: GT; All Engines;

• 1997-1997: Jazz; All Engines;

• 1996-1996: Trek; All Engines;

• 1995-1995: Celebration Edition; All Engines;

• 1995-1995: City; All Engines;

• 1994-1994: Limited Edition; All Engines;

Fits 10 more submodels. (Show all) Show less info

LEBRA CUSTOM HOOD PROTECTOR, VINYL, BLACK

The stylish and affordable way to protect your vehicle's hood from common road hazards such as rock chips, bugs, and tar.

Features:

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

Fits the following 1985-1992 Volkswagen Jetta submodels:

• 1988-1992: Carat; All Engines;
• 1987-1992: GLI 16-Valve; All Engines;

• 1985-1992: GL; All Engines;

• 1985-1989: Base; All Engines;

• 1987-1987: Wolfsburg Edition; All Engines;

• 1985-1987: GLI; All Engines;

Fits 4 more submodels. (Show all) Show less info

COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE

Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.

Features:

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Fits the following 1999-2004 Volkswagen Jetta submodels:

• 1999-2004: All Submodels; All Engines;

COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE

Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.

Features:

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Fits the following 1993-1995 Volkswagen Jetta submodels:

• 1995-1995: Celebration Edition; 4 Cyl 2.0L;
• 1995-1995: City; 4 Cyl 2.0L;

• 1993-1995: GL; 4 Cyl 2.0L;

• 1993-1995: GLS; 4 Cyl 2.0L;

• 1994-1994: Limited Edition; 4 Cyl 2.0L;

Fits 3 more submodels. (Show all) Show less info

COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE

Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.

Features:

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Fits the following 1991-1992 Volkswagen Jetta submodels:

• 1991-1992: Base; 4 Cyl 1.6L;
• 1991-1992: Base; 4 Cyl 1.8L;

• 1991-1992: Carat; 4 Cyl 1.8L;

• 1991-1992: GL; 4 Cyl 1.6L;

• 1991-1992: GL; 4 Cyl 1.8L;

• 1991-1992: GLI 16-Valve; 4 Cyl 2.0L;

• 1991-1992: GTX 16-V; 4 Cyl 2.0L;

Fits 5 more submodels. (Show all) Show less info

COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE

Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.

Features:

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Fits the following 1987-1990 Volkswagen Jetta submodels:

• 1990-1990: Base; 4 Cyl 1.6L;
• 1990-1990: Base; 4 Cyl 1.8L;

• 1990-1990: GL; 4 Cyl 1.6L;

• 1990-1990: GLI 16-Valve; 4 Cyl 2.0L;

• 1990-1990: GTX 16-V; 4 Cyl 2.0L;

• 1988-1990: Carat; 4 Cyl 1.8L;

• 1988-1990: GL; 4 Cyl 1.8L;

• 1987-1989: GLI 16-Valve; 4 Cyl 1.8L;

• 1987-1987: GLI; 4 Cyl 1.8L;

Fits 7 more submodels. (Show all) Show less info

COVERCRAFT M SERIES FULL FRONT END MASK, VINYL, BLACK

Covercraft M Series custom front end masks are designed as one-piece units for ease of installation and maximum protection.

Features:

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Fits the following 1987-1990 Volkswagen Jetta submodels:

• 1990-1990: Base; 4 Cyl 1.6L;
• 1990-1990: Base; 4 Cyl 1.8L;

• 1990-1990: GL; 4 Cyl 1.6L;

• 1990-1990: GLI 16-Valve; 4 Cyl 2.0L;

• 1990-1990: GTX 16-V; 4 Cyl 2.0L;

• 1988-1990: Carat; 4 Cyl 1.8L;

• 1988-1990: GL; 4 Cyl 1.8L;

• 1987-1989: GLI 16-Valve; 4 Cyl 1.8L;

• 1987-1987: GLI; 4 Cyl 1.8L;

Fits 7 more submodels. (Show all) Show less info

COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE

Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.

Features:

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Fits the following 1985-1989 Volkswagen Jetta submodels:

• 1985-1989: Base; 4 Cyl 1.6L;
• 1985-1989: Base; 4 Cyl 1.8L;

• 1987-1987: Wolfsburg Edition; 4 Cyl 1.6L;

• 1987-1987: Wolfsburg Edition; 4 Cyl 1.8L;

• 1985-1987: GL; 4 Cyl 1.6L;

• 1985-1987: GL; 4 Cyl 1.8L;

• 1985-1986: GLI; 4 Cyl 1.8L;

Fits 5 more submodels. (Show all) Show less info

COVERCRAFT MH SERIES DEFLECTOR-PROTECTOR HOOD SHIELD, VINYL, BLACK

Covercraft MD Series Deflector-Protector is a hood protector with a built-in bug deflector. Unlike hard plastic bug deflectors, Deflector-Protector can be removed in minutes and stored in your vehicle's trunk or behind the seat.

Features:

• Made of tough vinyl material that has a soft fleeced backing
• The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
• Custom-tailored to protect the front of the hood of most cars, vans, and pickups
• Can be used in any weather, including sun, snow or rain
• Easy no-drill installation

Fits the following 1985-1992 Volkswagen Jetta submodels:

• 1985-1992: All Submodels; All Engines;

COVERCRAFT M SERIES FULL FRONT END MASK, VINYL, BLACK

Covercraft M Series custom front end masks are designed as one-piece units for ease of installation and maximum protection.

Features:

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Fits the following 1981-1984 Volkswagen Jetta submodels:

• 1981-1984: All Submodels; All Engines;