Shop by Vehicle

Shop by Brand

Oil Pan Gasket

We have 946 Items for Oil Pan Gasket In-stock.

Nobody wants a messy garage; especially if it is slicked with oil! Tracing where the oil could come from in your vehicle, it may be a loose oil pan drain plug, or a dipstick tube unseated from the engine block, or even an oil filter that's not properly screwed. But if it's from a cracked seal, you should get a quality replacement Oil Pan Gasket. Made with either cork or rubber, this gasket prevents oil from leaking out of your vehicle. Since the oil pan is the area at the lowest point of the engine, it is close to the ground where it is prone to damage from road debris, curbs, and speed bumps. This is the reason why the Oil Pan Gasket should be frequently checked or replaced (if damaged) during oil change. You don't have to get out of your room to get a quality replacement Oil Pan Gasket. With a few clicks here at Autopartswarehouse, you can get the gasket of your choice through our large in-store selection. You name it, we have it. You can shop here fast, easy, and secure. It's hassle-free! Just ask our online and toll-free sales support people about us and they will guide you through payment details, delivery options, and the likes.

Buying Guides
  • Share on Google+
  • Pin It

Things to Consider When Getting an Oil Pan Gasket

If your engine constantly lacks lubrication, be very alarmed because this can lead to bigger problems such as overheating. You see, when your engine parts are not lubricated well, friction causes overheating and this can make your components wear out faster. The oil pan is the component that supplies your engine with the oil that it needs for lubrication and this part is protected by an oil pan gasket. Located between the engine block and oil pan, the oil pan gasket is constantly exposed to extreme under-the-hood conditions, so it's very vulnerable to damage. If left unchecked for a long time, it can have scratches and cuts, which can later result to leaks. To address the problem, get a brand-new oil pan gasket for your repairs ASAP.

Location

Before you go and spend your hard-earned cash on a new oil pan gasket, it would be best to check the source of the glitch first. You see, there are several oil pan gaskets in your ride and you can find them in the following locations:

  • Upper
  • Lower
  • Rear
  • Front

Material

When buying a replacement for your old and faulty oil pan gasket, make sure you get an item that is made using high-quality and hard-wearing materials. Luckily, looking for a good gasket won't be hard because it's available in several options:

  • Rubber ? cost-effective and lightweight
  • Cork ? elastic, easy to install, and ideal for changing temperatures
  • Rubber with steel core ? ideal for stock replacement use
  • Rubber-coated fiber ? can handle movement and compression
  • Paper ? soft and lightweight; ideal for short-term use
  • Fiber ? inexpensive and effectively seals even when temperature is high

For long-term performance, we recommend the rubber gasket, which is the most common of all six types. This is because rubber survives extreme conditions better than other types of gasket materials.

Cost

OEM replacement gaskets are widely available in the market today with prices ranging from 20 to 50 USD. They are quite inexpensive, so you don't have to worry about spending a lot for your repairs. For quality that you can trust, purchase from reliable brands like Felpro, Victor, and Beck Arnley. You can buy an oil pan gasket individually, in a 2-piece set, or a 4-piece set. Depending on what you need, we suggest you buy a set because it contains almost everything that you need to get your vehicle fixed.

Repair Guides
  • Share on Google+
  • Pin It

How to Install a New Oil Pan Gasket

Due to extreme under-the-hood-conditions, the oil pan gasket in your car will eventually acquire cracks and cause leaks. It can also be damaged by the humps and bumps that you face every time you are out on the road. If you're currently dealing with a busted oil pan gasket in your ride, the best thing you can do is replace it right away to prevent the problem from getting out of hand. Doing this vehicle DIY project can be quite a challenge, so before you get on with your repairs, see to it that you get the perfect replacement gasket that is fully compatible with your system.

Difficulty Level: Difficult

What You'll Need:

  • Floor jack and jack stands
  • Socket wrench
  • Torque wrench
  • Drain pan
  • Funnel
  • Replacement gasket

Step 1: Before you start, determine the recommended torque levels of your vehicle's oil pan bolts by consulting your dealer or reading your vehicle's manual.

Step 2: Using the floor jack, lift both the front and rear sides of your vehicle. Secure it in place by putting jack stands for support.

Step 3: Locate your oil pan's drain plug and put the drain pan right beneath it. Remove the plug and allow the engine oil to flow into the pan.

Step 4: When you're done draining, unbolt the oil pan to remove it. Once unbolted, support the oil pan by holding it and slowly lower the floor jack.

Step 5: Remove your old and faulty gasket carefully and clean the mount before installing the new one.

Step 6: Once your new gasket is in place, secure it by tightening the oil pan bolts according to their required torque levels.

Step 7: Reconnect the components that you removed like the drain plug and lower your vehicle. Replenish your system with brand-new engine oil to ensure its cleanliness and efficiency.