Borla Exhaust System

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Single rear exit
• 2 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 4 in. polished stainless steel tip with round shape, angle cut, and lined, rolled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Fits the following 1996-2001 Subaru Impreza submodels:

• 1996-2001: L; 4 Cyl 2.2L;
• 1996-2001: Outback; 4 Cyl 2.2L;

• 1997-1997: Brighton; 4 Cyl 2.2L;

• 1996-1996: LX; 4 Cyl 2.2L;

Fits 2 more submodels. (Show all) Show less info

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Single rear exit
• 2.25 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 3.38 in. polished stainless steel tip with square shape, angle cut, and intercooled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Fits the following 1995-1997 Toyota Land Cruiser submodels:

• 1995-1997: All Submodels; All Engines;

BORLA CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- 50-state legal; Increases power by 7 to 15 percent; 2.25 in. main piping diameter, 2 in. tailpipe diameter; Three mufflers with single inlet and outlet configuration each; Split rear exit; Includes pipes, mufflers, clamps, nut, washers, collector assembly, and dual 4 in. outlet, 8 in. length polished stainless steel tips with round shape, angle-cut, lined, and rolled edge design; Made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent stainless steel that maintains low decibels and protects the vehicle against burnout; Dyno-proven to yield an increase in flow and power while providing better fuel economy; Insulated to reduce shell temperature for a cooler driver's compartment; Features a patented uninterrupted-flow design and multi-core technology; With longer spike for scavenging to generate maximum power; Easy clamp-on installation.

Fits the following 2002-2005 Nissan Altima submodels:

• 2005-2005: SE-R; 6 Cyl 3.5L;
• 2002-2005: SE; 6 Cyl 3.5L;

• 2002-2005: SL; 6 Cyl 3.5L;

• 2002-2003: Base; 6 Cyl 3.5L;

• 2002-2003: S; 6 Cyl 3.5L;

Fits 3 more submodels. (Show all) Show less info

BORLA TOURING CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- 50-state legal; Increases power by 7 to 15 percent; 2.5 in. main piping diameter, 2.5 in. tailpipe diameter; Two mufflers with single inlet and outlet configuration each; Split rear exit; Includes pipes, mufflers, clamps, and dual 4 in. outlet, 12 in. length polished stainless steel tips with round shape, angle-cut, and rolled edge design; Made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent stainless steel that maintains low decibels and protects the vehicle against burnout; Dyno-proven to yield an increase in flow and power while providing better fuel economy; Insulated to reduce shell temperature for a cooler driver's compartment; Features a patented uninterrupted-flow design and multi-core technology; With longer spike for scavenging to generate maximum power; Easy clamp-on installation.

Fits the following 2010 Ford Mustang submodels:

• 2010-2010: GT; 8 Cyl 4.6L;

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Split rear exit
• 2.25 in. main piping diameter
• 2.25 in. tail pipe diameter
• Dual inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Dual 4 in. polished stainless steel tips with round shape, angle cut, and rolled edge design

Features

• 12 h.p. and 14 lb.-ft. of torque
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Fits the following 2007-2008 Toyota Tundra submodels:

• 2007-2008: Base; 8 Cyl 5.7L;
• 2007-2008: Limited; 8 Cyl 5.7L;

• 2007-2008: SR5; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal

Fits the following 2007-2008 Hummer H2 submodels:

• 2007-2008: All Submodels; All Engines;

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal

Fits the following 2006-2011 Honda Ridgeline submodels:

• 2009-2011: DX; All Engines;
• 2009-2011: VP; All Engines;

• 2008-2011: EX-L; All Engines;

• 2006-2011: RT; All Engines;

• 2006-2011: RTL; All Engines;

• 2006-2011: RTS; All Engines;

• 2008-2008: LX; All Engines;

• 2007-2008: RTX; All Engines;

Fits 6 more submodels. (Show all) Show less info

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal

Fits the following 2006-2009 Pontiac Solstice submodels:

• 2007-2009: Base; 4 Cyl 2.4L;
• 2006-2006: All Submodels; All Engines;

BORLA CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- 50-state legal; Increases power by 7 to 15 percent; 2.25 in. main piping diameter, 2.25 in. tailpipe diameter; Four mufflers with single inlet and outlet configuration each; Split rear exit; Includes pipes, mufflers, clamps, and dual 4.25 in. x 3.5 in. outlet, 12 in. length polished stainless steel tips with oval shape, angle-cut, lined, resonated, and rolled edge design; Made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent stainless steel that maintains low decibels and protects the vehicle against burnout; Dyno-proven to yield an increase in flow and power while providing better fuel economy; Insulated to reduce shell temperature for a cooler driver's compartment; Features a patented uninterrupted-flow design and multi-core technology; With longer spike for scavenging to generate maximum power; Easy clamp-on installation.

Fits the following 2006-2009 Land Rover Range Rover submodels:

• 2006-2009: Supercharged; 8 Cyl 4.2L;

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Split rear exit
• 2.25 in. main piping diameter
• 2.5 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• Four mufflers
• Dual 4.25 x 3.5 in. polished stainless steel tips with oval shape, angle cut, and rolled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Fits the following 2005-2010 Chrysler 300 submodels:

• 2010-2010: S; 8 Cyl 5.7L;
• 2005-2010: C; 8 Cyl 5.7L;

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Split rear exit
• 2.5 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• Two mufflers
• Dual 5 in. polished stainless steel tips with round shape, angle cut, and rolled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Fits the following 2005-2010 Chrysler 300 submodels:

• 2010-2010: S; 8 Cyl 5.7L;
• 2005-2010: C; 8 Cyl 5.7L;

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Split rear exit
• 2.5 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Dual 4 in. polished stainless steel tips with round shape, angle cut, and rolled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Fits the following 2004-2008 Ford F-150 submodels:

• 2008-2008: FX2; 8 Cyl 4.6L;
• 2008-2008: King Ranch; 8 Cyl 5.4L;

• 2007-2008: FX2; 8 Cyl 5.4L;

• 2004-2008: FX4; 8 Cyl 5.4L;

• 2004-2008: Lariat; 8 Cyl 5.4L;

• 2004-2008: STX; 8 Cyl 4.6L;

• 2004-2008: XL; 8 Cyl 4.6L;

• 2004-2008: XL; 8 Cyl 5.4L;

• 2004-2008: XLT; 8 Cyl 4.6L;

• 2004-2008: XLT; 8 Cyl 5.4L;

• 2006-2007: Harley-Davidson Edition; 8 Cyl 5.4L;

Fits 9 more submodels. (Show all) Show less info

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Split rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• Two mufflers
• Dual 5 in. polished stainless steel tips with round shape, angle cut, and lined, rolled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Fits the following 2004-2006 Cadillac CTS submodels:

• 2006-2006: V; 8 Cyl 6.0L;
• 2004-2005: V; 8 Cyl 5.7L;

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Single side exit
• 2.25 in. main piping diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 4 in. polished stainless steel tip with round shape, angle cut, and phantom edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Fits the following 2004-2006 Toyota Tundra submodels:

• 2004-2006: Limited; 8 Cyl 4.7L;
• 2004-2006: SR5; 8 Cyl 4.7L;

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Split side exit
• 2.25 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Dual 4 in. polished stainless steel tips with round shape, angle cut, and phantom edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Fits the following 2004-2006 Toyota Tundra submodels:

• 2004-2006: Limited; 8 Cyl 4.7L;
• 2004-2006: SR5; 8 Cyl 4.7L;