Chrysler Headers

PACESETTER HEADERS, STEEL, BLACK-PAINTED -- 50-state legal; 1.5 in. tube diameter, 16-gauge tube wall thickness, 3 in. flange collector, 0.375 in. standard head flange; Gasket and header extension included for stock system connection; With hook-ups for smog and engine management sensors; Without header bolt; Mid-length style; Round head port; These easy-to-clean headers feature mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; They significantly boost performance and increase engine efficiency; Fabrication may be required; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle; With Pacesetter's 3-year warranty.

Fits the following 2000-2002 Chrysler Neon submodels:

• 2000-2002: Base; 4 Cyl 2.0L;

GIBSON PERFORMANCE EXHAUST HEADER, CERAMIC COATED -- A Direct Replacement For Factory Manifold, Made Of High Quality 409L Stainless Steel And Heavy Duty Mandrel-Bent Tubing With High-Temp Coating To Maintain Constant Exhaust Flow For Outstanding Performance, Heavy Duty 3/8 Thick Laser Cut Port Flanges, Bolt-On Installation, No Welding Required, Attaches To OE Crossover Pipe, OEM Style Connections, Dyno-Tuned And Engineered To Deliver More Usable Horsepower And Torque, Increases Engine's Efficiency By Allowing It To Breathe Easier And Run At Cooler Temperature, Well Suited For Lowered and Raised Vehicles, Street And Off-Road, Premium Gaskets And Hardware Included, 50 State Street Legal

Fits the following 2005-2009 Chrysler 300 submodels:

• 2005-2009: C; 8 Cyl 5.7L;
• 2007-2009: C LWB; 8 Cyl 5.7L;

HEDMAN STANDARD DUTY EXHAUST HEADERS, BLACK-PAINTED -- 1.75 in. tube diameter, 18-gauge tube wall thickness, 3 in. flange collector, 0.25 in. standard head flange; Premium gasket and installation hardware included; Without smog injection or injection heads; Full-length style; Round head port; They feature 18-gauge mandrel-bent primary tubes; Protected by factory applied black paint for pre-installation protection; Made in USA; Modification to shift linkage may be needed; With Hedman's limited lifetime warranty.

Fits the following 1962-1974 Chrysler Newport submodels:

• 1962-1964: Base; 8 Cyl 5.9L; "GAS, CARB"
• 1962-1964: Base; 8 Cyl 6.8L; "GAS, CARB"

• 1963-1963: Base; 8 Cyl 7.0L; "GAS, CARB"

• 1965-1966: Base; 8 Cyl 6.3L; "GAS, CARB"

• 1966-1966: Base; 8 Cyl 7.2L; "GAS, CARB"

• 1967-1967: Custom; 8 Cyl 6.3L; "GAS, CARB"

• 1967-1967: Custom; 8 Cyl 7.2L; "GAS, CARB"

• 1968-1968: Custom; 8 Cyl 7.2L; "GAS, CARB, VIN K"

• 1968-1969: Custom; 8 Cyl 6.3L; "GAS, CARB, VIN G"

• 1968-1969: Custom; 8 Cyl 6.3L; "GAS, CARB, VIN H"

• 1968-1969: Custom; 8 Cyl 7.2L; "GAS, CARB, VIN L"

• 1970-1971: Custom; 8 Cyl 6.3L; "GAS, CARB, VIN L"

• 1970-1971: Custom; 8 Cyl 6.3L; "GAS, CARB, VIN N"

• 1970-1974: Custom; 8 Cyl 7.2L; "GAS, CARB, VIN U"

• 1970-1974: Custom; 8 Cyl 7.2L; "GAS, CARB, VIN T"

• 1971-1971: Royal; 8 Cyl 6.3L; "GAS, CARB, VIN L"

• 1971-1971: Royal; 8 Cyl 6.3L; "GAS, CARB, VIN N"

• 1972-1974: Custom; 8 Cyl 6.6L; "GAS, CARB, VIN M"

• 1974-1974: Custom; 8 Cyl 6.6L; "GAS, CARB, VIN N"

Fits 17 more submodels. (Show all) Show less info

HEDMAN STANDARD DUTY EXHAUST HEADERS, BLACK-PAINTED -- Not legal for sale or use in California on pollution controlled motor vehicles; 1.625 in. tube diameter, 18-gauge tube wall thickness, 3 in. flange collector, 0.25 in. standard head flange; Premium gasket and installation hardware included; Without smog injection or injection heads; Full-length style; Round head port; They feature 18-gauge mandrel-bent primary tubes; Protected by factory applied black paint for pre-installation protection; Made in USA; Modification to stock exhaust required to retain catalytic converter; A-type engine only; Modification to shift linkage may be needed; With Hedman's limited lifetime warranty.

Fits the following 1981 Chrysler Imperial submodels:

• 1981-1981: Base; 8 Cyl 5.2L;

STREET ROD PAINTED TIGHT TUBES, EXHAUST HEADER -- Tube Size 1.625, Collector Size 2.5, Without Smog Injection Or Injection Headers, Shortie Style, A-Type Engine Only. Will Fit With In-line Port Pattern Only, Must Use TD Performance Mount Kit Part Number 9716, Must Use Mini Starter, Without A.I.R Systems Emission Controls Are Not Removed Considered OEM Repl., All C Body

Fits the following 1971-1974 Chrysler Newport submodels:

• 1971-1972: Royal; 8 Cyl 5.9L;
• 1971-1974: Base; 8 Cyl 5.9L;

• 1974-1974: Custom; 8 Cyl 5.9L;

Fits 1 more submodels. (Show all) Show less info

HEDMAN STANDARD DUTY HTC EXHAUST HEADERS, CERAMIC METALLIC-COATED -- 1.625 in. Tube Size, 2.5 in. Collector Size, These Headers Feature 18-Gauge Mandrel-Bent Primary Tubes With 0.25 in. Flanges, They Are Coated With Hedman's Premium Ceramic-Metallic Substance That Protects The Headers Against Harsh Elements And Withstands Temperature Up To 1400 Degrees Fahrenheit, This Coating Keeps More Heat Inside The Tubes To Speed Up The Exhaust Flow Providing Better Performance And Cooler Underhood Temperatures, The Headers Come With Required Hardware And Gaskets For Installation, Made In USA, Without Smog Injection Or Injection Heads, Not Legal For Sale Or Use In California On Pollution Controlled Motor Vehicles, Modification To Stock Exhaust Required To Retain Catalytic Converter, A-Type Engine Only, Will Fit With In-Line Port Pattern Only, With Hedman's Limited 5-Year Warranty For The Coating And Limited Lifetime Warranty For The Headers

Fits the following 1981 Chrysler Imperial submodels:

• 1981-1981: Base; 8 Cyl 5.2L;

JBA-CAT4WARD SHORTY HEADERS, 1 3/4 DIAMETER, 14 GAUGE MANDREL BENT TUBE, 409 STAINLESS STEEL -- Direct Replacement For Factory Manifold, Thick Laser-Cut Flanges, Patented Firecone Collector, High Quality Hardware Included, Direct Bolt-On Installation, C.A.R.B Certified 50 State Smog Legal, Will Not Void Warranty, Increases Horsepower And Torque, Improved Fuel Economy, Improved Throttle Response

Fits the following 2005-2006 Chrysler 300 submodels:

• 2005-2006: C; 8 Cyl 5.7L;

BBK CNC-SERIES SHORTY HEADERS, CHROME FINISH -- 1.625 in. tube diameter; 16-gauge tube wall thickness; 0.375 in. standard head flange; Includes gaskets, installation instruction, and hardware; Shorty style; Round head port; These headers feature CNC mandrel-bent tubing for unrestrictive airflow and one-piece laser cut flange for added strength and durability; Dyno and pressure tested to ensure leak-free and maximum performance; Easy direct bolt-on installation; With BBK's limited 1-year warranty.

Fits the following 2005-2008 Chrysler 300 submodels:

• 2005-2008: C SRT8; 8 Cyl 6.1L; "GAS, FI, VIN W"
• 2005-2008: C; 8 Cyl 5.7L; "GAS, FI, VIN H"

• 2007-2008: C LWB; 8 Cyl 5.7L; "GAS, FI, VIN H"

Fits 1 more submodels. (Show all) Show less info

BBK CNC-SERIES SHORTY HEADERS, CERAMIC-COATED -- 1.625 in. tube diameter; 16-gauge tube wall thickness; 0.375 in. standard head flange; Gaskets, and installation instructions and hardware included; Shorty style; Round head port; These headers feature CNC mandrel-bent tubing for unrestrictive airflow and one-piece laser cut flange for added strength and durability; Dyno and pressure tested to ensure leak-free and maximum performance; Easy direct bolt-on installation; With BBK's limited 1-year warranty.

Fits the following 2005-2008 Chrysler 300 submodels:

• 2005-2008: C SRT8; 8 Cyl 6.1L; "GAS, FI, VIN W"
• 2005-2008: C; 8 Cyl 5.7L; "GAS, FI, VIN H"

• 2007-2008: C LWB; 8 Cyl 5.7L; "GAS, FI, VIN H"

Fits 1 more submodels. (Show all) Show less info

BBK SPEEDWARE FULL-LENGTH HEADERS, T-304 STAINLESS STEEL, CHROME FINISH -- 1.625 in. tube diameter; 0.375 in. standard head flange; 3 in. high-flow metallic substrate converters and installation hardware; Full-length style; Round head port; These headers feature CNC mandrel-bent tubing for unrestrictive airflow and thick plasma cut stainless steel flanges; Dyno and pressure tested to ensure leak-free and maximum performance; These headers require BBK short X-pipe for a complete installation to the cat-back exhaust system; Easy direct bolt-on installation; With BBK's limited 1-year warranty.

Fits the following 2005-2008 Chrysler 300 submodels:

• 2005-2008: C SRT8; 8 Cyl 6.1L; "GAS, FI, VIN W"
• 2005-2008: C; 8 Cyl 5.7L; "GAS, FI, VIN H"

• 2007-2008: C LWB; 8 Cyl 5.7L; "GAS, FI, VIN H"

Fits 1 more submodels. (Show all) Show less info