Dynomax Exhaust System

DYNOMAX SUPER TURBO SINGLE EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 2 in. main piping diameter; Single rear exit; Single inlet and outlet muffler configuration; Includes installation hardware, gaskets, super turbo aluminized steel muffler, and single 3 in. polished stainless steel tip with round shape, straight cut, and non-rolled edge design; A passenger car cat-back exhaust system; Follows the OE routing and attaches directly to OE mounting locations; Features a direct fit super turbo muffler made for sharper appearance and longer life; This muffler has exclusive Dynomax patented flow directors that channel exhaust flow and eliminate turbulence while its large diameter internal tubes maximize the entire system's efficiency; It uses fiberglass matting for mellow and true performance sound and reduces backpressure for increased horsepower and fuel economy; Its aluminized steel pipes are mandrel-bent to provide smooth and unrestricted flow, increasing horsepower and torque; Easy clamp-on installation; With Dynomax's limited lifetime warranty.

Fits the following 1992-1995 Honda Civic submodels:

• 1992-1995: CX; 4 Cyl 1.5L; "GAS, FI, D15B8"
• 1992-1995: DX; 4 Cyl 1.5L; "GAS, FI, D15B7"

• 1992-1995: Si; 4 Cyl 1.6L; "GAS, FI, D16Z6"

• 1992-1995: VX; 4 Cyl 1.5L; "GAS, FI, D15Z1"

Fits 2 more submodels. (Show all) Show less info

DYNOMAX SUPER TURBO SINGLE EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 2.25 in. Muffler's Inlet Diameter, 2.25 in. Tail Pipe Diameter, A Truck Cat-Back Exhaust System, Single Rear Exit, Single Inlet/Single Outlet Muffler Configuration, Follows The OE Routing And Attaches Directly To OE Mounting Locations, Features Direct Fit Super Turbo Muffler Made Of Aluminized Steel For Sharper Appearance And Longer Life, This Muffler Has Exclusive Dynomax Patented Flow Directors That Channel Exhaust Flow And Eliminate Turbulence While Its Large Diameter Internal Tubes Maximize The Entire System's Efficiency, It Uses Fiberglass Matting For Mellow And True Performance Sound And Reduces Backpressure For Increased Horsepower And Fuel Economy, Its Aluminized Steel Pipes Are Mandrel Bent To Provide Smooth And Unrestricted Flow Increasing Horsepower And Torque, Comes With Required Clamps And Hangers Necessary For A Complete Installation, Optional Exhaust Spout Or Tip Is Sold Separately, With Dynomax's Limited Lifetime Warranty

Fits the following 1993-1998 Jeep Grand Cherokee submodels:

• 1993-1993: Base; 6 Cyl 4.0L; "GAS, FI, VIN S"
• 1993-1993: Base; 8 Cyl 5.2L; "GAS, FI, VIN Y"

• 1993-1998: Laredo; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1993-1998: Laredo; 8 Cyl 5.2L; "GAS, FI, VIN Y"

• 1993-1998: Limited; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1993-1998: Limited; 8 Cyl 5.2L; "GAS, FI, VIN Y"

• 1994-1995: SE; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1994-1995: SE; 8 Cyl 5.2L; "GAS, FI, VIN Y"

• 1995-1997: Orvis; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1995-1997: Orvis; 8 Cyl 5.2L; "GAS, FI, VIN Y"

• 1997-1998: TSi; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1997-1998: TSi; 8 Cyl 5.2L; "GAS, FI, VIN Y"

Fits 10 more submodels. (Show all) Show less info

DYNOMAX SUPER TURBO DUAL EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 2.5 in. main piping diameter, 2.5 in. tail pipe diameter; Split rear exit; Single inlet and dual outlet muffler configuration; Includes installation hardware, gaskets, and super turbo aluminized steel muffler; A passenger car cat-back exhaust system; Follows the OE routing and attaches directly to OE mounting locations; Features a direct fit super turbo muffler made for sharper appearance and longer life; This muffler has exclusive Dynomax patented flow directors that channel exhaust flow and eliminate turbulence while its large diameter internal tubes maximize the entire system's efficiency; It uses fiberglass matting for mellow and true performance sound and reduces backpressure for increased horsepower and fuel economy; Its aluminized steel pipes are mandrel-bent to provide smooth and unrestricted flow, increasing horsepower and torque; Easy clamp-on installation; With Dynomax's limited lifetime warranty.

Fits the following 1982-1992 Pontiac Firebird submodels:

• 1982-1983: Trans Am; 8 Cyl 5.0L; "GAS, FI, VIN 7"
• 1982-1986: S/E; 8 Cyl 5.0L; "GAS, CARB, VIN H"

• 1982-1987: Base; 8 Cyl 5.0L; "GAS, CARB, VIN H"

• 1982-1987: Trans Am; 8 Cyl 5.0L; "GAS, CARB, VIN H"

• 1983-1983: Base; 8 Cyl 5.0L; "GAS, FI, VIN S"

• 1983-1983: S/E; 8 Cyl 5.0L; "GAS, FI, VIN S"

• 1983-1983: Trans Am; 8 Cyl 5.0L; "GAS, FI, VIN S"

• 1983-1984: Base; 6 Cyl 2.8L; "GAS, CARB, VIN 1"

• 1983-1984: S/E; 6 Cyl 2.8L; "GAS, CARB, VIN 1"

• 1983-1984: S/E; 6 Cyl 2.8L; "GAS, CARB, VIN L"

• 1985-1986: S/E; 6 Cyl 2.8L; "GAS, FI, VIN S"

• 1985-1989: Base; 6 Cyl 2.8L; "GAS, FI, VIN S"

• 1988-1992: Base; 8 Cyl 5.0L; "GAS, FI, VIN E"

• 1988-1992: Trans Am; 8 Cyl 5.0L; "GAS, FI, VIN E"

• 1989-1992: Formula; 8 Cyl 5.0L; "GAS, FI, VIN E"

• 1989-1992: Trans Am GTA; 8 Cyl 5.0L; "GAS, FI, VIN E"

• 1990-1992: Base; 6 Cyl 3.1L; "GAS, FI, VIN T"

Fits 15 more submodels. (Show all) Show less info

DYNOMAX ULTRA FLO WELDED SINGLE EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 3 in. outlet main pipe diameter, 3 in. tailpipe diameter; Single side exit; Single inlet and outlet muffler configuration; Includes muffler, pipes, clamps, and chrome T-304 stainless steel exhaust spout or tip with round shape, angle-cut, non-rolled edge design; A truck cat-back exhaust system; Follows the OE routing and attaches directly to OE mounting locations; Features 100 percent aluminized steel Ultra Flo muffler with welded construction for maximum durability and continuous roving fiberglass for aggressive, powerful, and deep performance sound; Its aluminized steel pipes are mandrel bent to provide smooth and unrestricted flow, increasing horsepower, torque, and fuel economy; With Dynomax's limited lifetime warranty.

Fits the following 2002-2005 Dodge Ram 1500 submodels:

• 2002-2003: Base; 6 Cyl 3.7L; "GAS, FI, VIN K"
• 2002-2003: Base; 8 Cyl 4.7L; "GAS, FI, VIN N"

• 2002-2003: Base; 8 Cyl 5.9L; "GAS, FI, VIN Z"

• 2004-2005: SLT; 8 Cyl 4.7L; "FLEX, FI, VIN P"

• 2004-2005: SLT; 8 Cyl 4.7L; "GAS, FI, VIN N"

• 2004-2005: ST; 6 Cyl 3.7L; "GAS, FI, VIN K"

• 2004-2005: ST; 8 Cyl 4.7L; "FLEX, FI, VIN P"

• 2004-2005: ST; 8 Cyl 4.7L; "GAS, FI, VIN N"

Fits 6 more submodels. (Show all) Show less info

DYNOMAX SUPER TURBO CAT-BACK SINGLE EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 2.25 in. main piping diameter, 2.25 in. tailpipe diameter; Single rear exit; Single inlet and outlet muffler configuration; Includes muffler, pipe, clamps, and single 2.5 in. T-304 stainless steel spout with round shape, angle cut, and rolled edge design; A truck cat-back exhaust system, Follows the OE routing and attaches directly to OE mounting locations; Features a direct fit super turbo muffler made for sharper appearance and longer life; This muffler has exclusive Dynomax patented flow directors that channel exhaust flow and eliminate turbulence while its large diameter internal tubes maximize the entire system's efficiency; It uses fiberglass matting for mellow and true performance sound and reduces backpressure for increased horsepower and fuel economy; Its aluminized steel pipes are mandrel-bent to provide smooth and unrestricted flow, increasing horsepower and torque; Easy bolt-on installation; With Dynomax's limited lifetime warranty.

Fits the following 1997-2000 Jeep Wrangler submodels:

• 1997-2000: SE; 4 Cyl 2.5L; "GAS, FI, VIN P"
• 1997-2000: Sahara; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1997-2000: Sport; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1998-2000: SE; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1998-2000: Sahara; 4 Cyl 2.5L; "GAS, FI, VIN P"

• 1998-2000: Sport; 4 Cyl 2.5L; "GAS, FI, VIN P"

Fits 4 more submodels. (Show all) Show less info

DYNOMAX SUPER TURBO DUAL EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 2.25 in. main piping diameter, 2.5 in. tailpipe diameter; Split rear exit; Two mufflers with single offset inlet and center outlet configuration each; Includes installation hardware, gaskets, dual super turbo aluminized steel muffler, and 2.5 in. dual slant cut polished stainless steel tips; A passenger car cat-back exhaust system; Follows the OE routing and attaches directly to OE mounting locations; Features a direct fit super turbo muffler made for sharper appearance and longer life; This muffler has exclusive Dynomax patented flow directors that channel exhaust flow and eliminate turbulence while its large diameter internal tubes maximize the entire system's efficiency; It uses fiberglass matting for mellow and true performance sound and reduces backpressure for increased horsepower and fuel economy; Its aluminized steel pipes are mandrel-bent to provide smooth and unrestricted flow, increasing horsepower and torque; Easy clamp-on installation; With Dynomax's limited lifetime warranty.

Fits the following 1997-2005 Pontiac Grand Prix submodels:

• 1997-1998: GT; 6 Cyl 3.8L; "GAS, FI, VIN K"
• 1997-2003: GTP; 6 Cyl 3.8L; "GAS, FI, Supercharged, VIN 1"

• 2004-2005: GTP; 6 Cyl 3.8L; "GAS, FI, Supercharged, VIN 4"

• 2005-2005: GT; 6 Cyl 3.8L; "GAS, FI, L26, VIN 2"

• 2005-2005: GXP; 8 Cyl 5.3L; "GAS, FI, VIN C"

Fits 3 more submodels. (Show all) Show less info

DYNOMAX DUAL PIPE KIT -- Specifically Designed For Dynomax Header Part Number 85121, For Use With Super Turbo Muffler Part Number 17731 Or An Equivalent 2-1/4 in. I.D. Inlet X 2-1/4 in. I.D. Outlet, Single Off Set OEM Muffler, Glasspack Mufflers May Be Used With Slight Modifications, The Legal Use Of This Kit Is Based On The Converter Used, Unless Certified Or Exempted By CARB, Headers Are Not Legal For Sale Or Use In California On 1975 Or Later Model Catalyst-Equipped Vehicles, Except Racing Vehicles Which May Not Be Used Or Operated On A Highway, Pre-Catalyst Vehicles Must Utilize Original Emission Control Devices Which The Customer Should Reinstall, For Racing Use Only And Not Intended Or Applicable For Highway Use In All Other States, Muffler And Muffler U-Clamp Not Included, With Dynomax's Limited Lifetime Warranty

Fits the following 1978-1987 Oldsmobile Cutlass Supreme submodels:

• 1978-1978: Base; 8 Cyl 5.0L; "GAS, CARB, VIN U"
• 1978-1978: Base; 8 Cyl 5.7L; "GAS, CARB, VIN L"

• 1978-1978: Brougham; 8 Cyl 5.0L; "GAS, CARB, VIN U"

• 1978-1980: Base; 8 Cyl 5.0L; "GAS, CARB, VIN H"

• 1978-1980: Brougham; 8 Cyl 5.0L; "GAS, CARB, VIN H"

• 1979-1980: Base; 8 Cyl 5.7L; "GAS, CARB, VIN R"

• 1979-1980: Brougham; 8 Cyl 5.7L; "GAS, CARB, VIN R"

• 1982-1987: Base; 8 Cyl 5.0L; "GAS, CARB, VIN Y"

• 1982-1987: Brougham; 8 Cyl 5.0L; "GAS, CARB, VIN Y"

• 1985-1985: LS; 8 Cyl 5.0L; "GAS, CARB, VIN Y"

• 1987-1987: 442; 8 Cyl 5.0L; "GAS, CARB, VIN 9"

• 1987-1987: 442; 8 Cyl 5.0L; "GAS, CARB, VIN Y"

• 1987-1987: Base; 8 Cyl 5.0L; "GAS, CARB, VIN 9"

• 1987-1987: Brougham; 8 Cyl 5.0L; "GAS, CARB, VIN 9"

Fits 12 more submodels. (Show all) Show less info

DYNOMAX ULTRA FLO WELDED SINGLE EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 3 in. Main Pipe Diameter, 3 in. Tail Pipe Diameter, A Truck Cat-Back Exhaust System, Single Side Exit, Single Inlet/Single Outlet Muffler Configuration, Follows The OE Routing And Attaches Directly To OE Mounting Locations, Features 100% Aluminized Steel Ultra Flo Muffler With Welded Construction For Maximum Durability, Straight-Through Design For Ultimate Exhaust System Performance, And Continuous Roving Fiberglass For Aggressive, Powerful, And Deep Performance Sound, Its Aluminized Steel Pipes Are Mandrel Bent To Provide Smooth And Unrestricted Flow Increasing Horsepower, Torque, And Fuel Economy, Comes With Required Clamps And Hangers Necessary For A Complete Installation, Includes 4 in. Polished T304 Stainless Steel Exhaust Spout Or Tip With Round Shape, Straight Cut, Non-Rolled Edge Design, With Dynomax's Limited Lifetime Warranty

Fits the following 2006 Dodge Ram 1500 submodels:

• 2006-2006: Laramie; 8 Cyl 4.7L; "GAS, FI, VIN N"
• 2006-2006: Laramie; 8 Cyl 5.7L; "GAS, FI, EZB, VIN 2"

• 2006-2006: Laramie; 8 Cyl 5.7L; "GAS, FI, VIN D"

• 2006-2006: SLT; 8 Cyl 4.7L; "FLEX, FI, VIN P"

• 2006-2006: SLT; 8 Cyl 4.7L; "GAS, FI, VIN N"

• 2006-2006: SLT; 8 Cyl 5.7L; "GAS, FI, EZB, VIN 2"

• 2006-2006: SLT; 8 Cyl 5.7L; "GAS, FI, VIN D"

• 2006-2006: ST; 6 Cyl 3.7L; "GAS, FI, VIN K"

• 2006-2006: ST; 8 Cyl 4.7L; "FLEX, FI, VIN P"

• 2006-2006: ST; 8 Cyl 4.7L; "GAS, FI, VIN N"

• 2006-2006: ST; 8 Cyl 5.7L; "GAS, FI, EZB, VIN 2"

• 2006-2006: Sport; 8 Cyl 5.7L; "GAS, FI, EZB, VIN 2"

• 2006-2006: TRX4; 8 Cyl 4.7L; "FLEX, FI, VIN P"

• 2006-2006: TRX4; 8 Cyl 4.7L; "GAS, FI, VIN N"

• 2006-2006: TRX4; 8 Cyl 5.7L; "GAS, FI, EZB, VIN 2"

Fits 13 more submodels. (Show all) Show less info

DYNOMAX SUPER TURBO DUAL EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 2.25 in. Inlet/2.5 in. Outlet Exhaust Pipe Diameter, 2.5 in. Tail Pipe Diameter, A Passenger Car Cat-Back Exhaust System, Dual Split Rear Exit, Two Mufflers With Single Inlet/Single Outlet Configuration, Dyno Proven To Provide Power Gains Of Up To 17 h.p. And 21 ft.-lbs. Torque At 4100 RPM, Follows The OE Routing And Attaches Directly To OE Mounting Locations, Features Direct Fit Super Turbo Muffler Made Of Aluminized Steel For Sharper Appearance And Longer Life, This Muffler Has Exclusive Dynomax Patented Flow Directors That Channel Exhaust Flow And Eliminate Turbulence While Its Large Diameter Internal Tubes Maximize The Entire System's Efficiency, It Uses Fiberglass Matting For Mellow And True Performance Sound And Reduces Backpressure For Increased Horsepower And Fuel Economy, Its Aluminized Steel Pipes Are Mandrel Bent To Provide Smooth And Unrestricted Flow Increasing Horsepower And Torque, Comes With Required Clamps And Hangers Necessary For A Complete Installation, Optional Exhaust Spouts Or Tips Are Sold Separately, With Dynomax's Limited Lifetime Warranty

Fits the following 2006-2009 Dodge Charger submodels:

• 2006-2008: SE; 6 Cyl 3.5L; "GAS, FI, VIN G"
• 2006-2008: SXT; 6 Cyl 3.5L; "GAS, FI, VIN G"

• 2009-2009: SE; 6 Cyl 3.5L; "GAS, FI, VIN V"

• 2009-2009: SXT; 6 Cyl 3.5L; "GAS, FI, VIN V"

Fits 2 more submodels. (Show all) Show less info

DYNOMAX ULTRA FLO WELDED DUAL EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 2.5 in. Main Pipe Diameter, A Passenger Car Cat-Back Exhaust System, Dual Split Rear Exit, Two Mufflers With Single Inlet/Single Outlet Configuration, Follows The OE Routing And Attaches Directly To OE Mounting Locations, Features 100% Aluminized Steel Ultra Flo Muffler With Welded Construction For Maximum Durability, Straight-Through Design For Ultimate Exhaust System Performance, And Continuous Roving Fiberglass For Aggressive, Powerful, And Deep Performance Sound, Its Aluminized Steel Pipes Are Mandrel Bent To Provide Smooth And Unrestricted Flow Increasing Horsepower, Torque, And Fuel Economy, Comes With Required Clamps And Hangers Necessary For A Complete Installation, Optional Exhaust Spouts Or Tips Are Sold Separately, With Dynomax's Limited Lifetime Warranty

Fits the following 2005-2009 Ford Mustang submodels:

• 2005-2005: GT; 8 Cyl 4.6L; "GAS, FI, VIN X"
• 2006-2009: GT; 8 Cyl 4.6L; "GAS, FI, VIN H"

• 2007-2008: Shelby GT; 8 Cyl 4.6L; "GAS, FI, VIN H"

• 2007-2009: Shelby GT500; 8 Cyl 5.4L; "GAS, FI, Supercharged, VIN S"

Fits 2 more submodels. (Show all) Show less info

DYNOMAX SUPER TURBO CAT-BACK DUAL EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 3 in. main piping diameter, 2.5 in. tailpipe diameter; Split rear exit; Single inlet and dual outlet muffler configuration; Includes muffler, pipes, hangers, bolt kit, cable ties, clamps, and instruction sheet; A truck cat-back exhaust system; Follows the OE routing and attaches directly to OE mounting locations; Features a direct fit super turbo muffler made for sharper appearance and longer life; This muffler has exclusive Dynomax patented flow directors that channel exhaust flow and eliminate turbulence while its large diameter internal tubes maximize the entire system's efficiency; It uses fiberglass matting for mellow and true performance sound and reduces backpressure for increased horsepower and fuel economy; Its aluminized steel pipes are mandrel-bent to provide smooth and unrestricted flow, increasing horsepower and torque; Easy bolt-on installation; Optional exhaust spout or tip are sold separately; With Dynomax's limited lifetime warranty.

Fits the following 2004-2005 Dodge Ram 1500 submodels:

• 2004-2005: SLT; 8 Cyl 5.7L; "GAS, FI, VIN D"
• 2004-2005: ST; 8 Cyl 5.7L; "GAS, FI, VIN D"

• 2005-2005: Hemi Sport; 8 Cyl 5.7L; "GAS, FI, VIN D"

• 2005-2005: Laramie; 8 Cyl 5.7L; "GAS, FI, VIN D"

• 2005-2005: Rumble Bee; 8 Cyl 5.7L; "GAS, FI, VIN D"

Fits 3 more submodels. (Show all) Show less info

DYNOMAX ULTRA FLO WELDED SINGLE EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 2.5 in. Inlet/3 in. Outlet Main Pipe Diameter, 3 in. Tail Pipe Diameter, A Truck Cat-Back Exhaust System, Single Side Exit, Single Inlet/Single Outlet Muffler Configuration, Follows The OE Routing And Attaches Directly To OE Mounting Locations, Features 100% Aluminized Steel Ultra Flo Muffler With Welded Construction For Maximum Durability, Straight-Through Design For Ultimate Exhaust System Performance, And Continuous Roving Fiberglass For Aggressive, Powerful, And Deep Performance Sound, Its Aluminized Steel Pipes Are Mandrel Bent To Provide Smooth And Unrestricted Flow Increasing Horsepower, Torque, And Fuel Economy, Comes With Required Clamps And Hangers Necessary For A Complete Installation, Includes 3 in. Chrome Exhaust Spout Or Tip, With Dynomax's Limited Lifetime Warranty

Fits the following 2001-2006 GMC Yukon submodels:

• 2001-2005: SLT; 8 Cyl 4.8L; "GAS, FI, VIN V"
• 2001-2006: SLE; 8 Cyl 4.8L; "GAS, FI, VIN V"

• 2001-2006: SLE; 8 Cyl 5.3L; "GAS, FI, VIN T"

• 2001-2006: SLT; 8 Cyl 5.3L; "GAS, FI, VIN T"

• 2002-2006: SLE; 8 Cyl 5.3L; "FLEX, FI, L59, VIN Z"

• 2002-2006: SLT; 8 Cyl 5.3L; "FLEX, FI, L59, VIN Z"

• 2006-2006: SL; 8 Cyl 4.8L; "GAS, FI, VIN V"

• 2006-2006: SL; 8 Cyl 5.3L; "FLEX, FI, L59, VIN Z"

• 2006-2006: SL; 8 Cyl 5.3L; "GAS, FI, VIN T"

Fits 7 more submodels. (Show all) Show less info

DYNOMAX SUPER TURBO SINGLE EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 2.5 in. main piping diameter, 2.5 in. tail pipe diameter; Single side exit; Single inlet and outlet muffler configuration; Includes single 3 in. stainless steel spout with round shape, angle cut, and rolled edge design, muffler, clamps, and hardware for a complete installation; A truck cat-back exhaust system, Follows the OE routing and attaches directly to OE mounting locations; Features a direct fit super turbo muffler made for sharper appearance and longer life; This muffler has exclusive Dynomax patented flow directors that channel exhaust flow and eliminate turbulence while its large diameter internal tubes maximize the entire system's efficiency; It uses fiberglass matting for mellow and true performance sound and reduces backpressure for increased horsepower and fuel economy; Its aluminized steel pipes are mandrel-bent to provide smooth and unrestricted flow, increasing horsepower and torque; Easy clamp-on installation; Optional exhaust spout or tip are sold separately; With Dynomax's limited lifetime warranty.

Fits the following 1998-2005 Ford Ranger submodels:

• 1998-1998: Splash; 4 Cyl 2.5L; "GAS, FI, VIN C"
• 1998-1998: Splash; 6 Cyl 3.0L; "GAS, FI, VIN U"

• 1998-1998: Splash; 6 Cyl 4.0L; "GAS, FI, VIN X"

• 1998-2001: XL; 4 Cyl 2.5L; "GAS, FI, VIN C"

• 1998-2001: XL; 6 Cyl 4.0L; "GAS, FI, VIN X"

• 1998-2001: XLT; 4 Cyl 2.5L; "GAS, FI, VIN C"

• 1998-2001: XLT; 6 Cyl 4.0L; "GAS, FI, VIN X"

• 1998-2005: XL; 6 Cyl 3.0L; "GAS, FI, VIN U"

• 1998-2005: XLT; 6 Cyl 3.0L; "GAS, FI, VIN U"

• 1999-2004: XL; 6 Cyl 3.0L; "FLEX, FI, VIN V"

• 1999-2004: XLT; 6 Cyl 3.0L; "FLEX, FI, VIN V"

• 2001-2001: Edge; 6 Cyl 4.0L; "GAS, FI, VIN X"

• 2001-2004: Edge; 6 Cyl 3.0L; "FLEX, FI, VIN V"

• 2001-2004: XL; 4 Cyl 2.3L; "GAS, FI, VIN D"

• 2001-2005: Edge; 6 Cyl 3.0L; "GAS, FI, VIN U"

• 2001-2005: Edge; 6 Cyl 4.0L; "GAS, FI, VIN E"

• 2001-2005: XLT; 4 Cyl 2.3L; "GAS, FI, VIN D"

• 2001-2005: XLT; 6 Cyl 4.0L; "GAS, FI, VIN E"

• 2001-2005: XL; 6 Cyl 4.0L; "GAS, FI, VIN E"

• 2004-2004: Tremor; 6 Cyl 3.0L; "FLEX, FI, VIN V"

• 2004-2004: Tremor; 6 Cyl 3.0L; "GAS, FI, VIN U"

• 2004-2004: Tremor; 6 Cyl 4.0L; "GAS, FI, VIN E"

• 2005-2005: FX4; 6 Cyl 4.0L; "GAS, FI, VIN E"

• 2005-2005: STX; 6 Cyl 3.0L; "GAS, FI, VIN U"

Fits 22 more submodels. (Show all) Show less info

DYNOMAX SUPER TURBO SINGLE EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 3 in. Main Pipe Diameter, 3 in. Tail Pipe Diameter, A Truck Cat-Back Exhaust System, Single Side Exit, Single Inlet/Single Outlet Muffler Configuration, Follows The OE Routing And Attaches Directly To OE Mounting Locations, Features Direct Fit Super Turbo Muffler Made Of Aluminized Steel For Sharper Appearance And Longer Life, This Muffler Has Exclusive Dynomax Patented Flow Directors That Channel Exhaust Flow And Eliminate Turbulence While Its Large Diameter Internal Tubes Maximize The Entire System's Efficiency, It Uses Fiberglass Matting For Mellow And True Performance Sound And Reduces Backpressure For Increased Horsepower And Fuel Economy, Its Aluminized Steel Pipes Are Mandrel Bent To Provide Smooth And Unrestricted Flow Increasing Horsepower And Torque, Comes With Required Clamps And Hangers Necessary For A Complete Installation, Optional Exhaust Spout Or Tip Is Sold Separately, With Dynomax's Limited Lifetime Warranty

Fits the following 1994-1995 GMC K1500 submodels:

• 1994-1995: Sierra SL; 6 Cyl 4.3L; "GAS, FI, VIN Z"
• 1994-1995: Sierra SL; 8 Cyl 5.0L; "GAS, FI, VIN H"

• 1994-1995: Sierra SL; 8 Cyl 5.7L; "GAS, FI, VIN K"

• 1994-1995: Sierra SLE; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1994-1995: Sierra SLE; 8 Cyl 5.0L; "GAS, FI, VIN H"

• 1994-1995: Sierra SLE; 8 Cyl 5.7L; "GAS, FI, VIN K"

• 1994-1995: Sierra Special; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1994-1995: Sierra Special; 8 Cyl 5.0L; "GAS, FI, VIN H"

• 1994-1995: Sierra Special; 8 Cyl 5.7L; "GAS, FI, VIN K"

• 1995-1995: Sierra SLS; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1995-1995: Sierra SLS; 8 Cyl 5.0L; "GAS, FI, VIN H"

• 1995-1995: Sierra SLS; 8 Cyl 5.7L; "GAS, FI, VIN K"

• 1995-1995: Sierra SLT; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1995-1995: Sierra SLT; 8 Cyl 5.0L; "GAS, FI, VIN H"

• 1995-1995: Sierra SLT; 8 Cyl 5.7L; "GAS, FI, VIN K"

Fits 13 more submodels. (Show all) Show less info

DYNOMAX SUPER TURBO CAT-BACK SINGLE EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 3 in. main piping diameter, 3 in. tailpipe diameter; Single side exit; Single inlet and outlet muffler configuration; Includes muffler, pipes, and clamps; A truck cat-back exhaust system; Follows the OE routing and attaches directly to OE mounting locations; Features a direct fit super turbo muffler made for sharper appearance and longer life; This muffler has exclusive Dynomax patented flow directors that channel exhaust flow and eliminate turbulence while its large diameter internal tubes maximize the entire system's efficiency; It uses fiberglass matting for mellow and true performance sound and reduces backpressure for increased horsepower and fuel economy; Its aluminized steel pipes are mandrel-bent to provide smooth and unrestricted flow, increasing horsepower and torque; Easy bolt-on installation; Optional exhaust spout or tip are sold separately; With Dynomax's limited lifetime warranty.

Fits the following 1994-1997 GMC C2500 submodels:

• 1994-1995: Sierra SL; 6 Cyl 4.3L; "GAS, FI, VIN Z"
• 1994-1995: Sierra SL; 8 Cyl 5.0L; "GAS, FI, VIN H"

• 1994-1995: Sierra SL; 8 Cyl 5.7L; "GAS, FI, VIN K"

• 1994-1995: Sierra SLE; 6 Cyl 4.3L; "GAS, FI, VIN Z"

• 1994-1995: Sierra SLE; 8 Cyl 5.0L; "GAS, FI, VIN H"

• 1994-1995: Sierra SLE; 8 Cyl 5.7L; "GAS, FI, VIN K"

• 1994-1995: Sierra SLT; 8 Cyl 5.0L; "GAS, FI, VIN H"

• 1994-1995: Sierra SLT; 8 Cyl 5.7L; "GAS, FI, VIN K"

• 1996-1997: Sierra SL; 8 Cyl 5.0L; "GAS, FI, VIN M"

• 1996-1997: Sierra SLE; 8 Cyl 5.0L; "GAS, FI, VIN M"

• 1996-1997: Sierra SLT; 8 Cyl 5.0L; "GAS, FI, VIN M"

Fits 9 more submodels. (Show all) Show less info