Eagle Nitrous System Performance

Magnaflow Performance Series Exhaust System

Magnaflow Performance Series Exhaust system is dyno-tested and proven to make power, performance gain in horsepower and torque. This top-quality system boast great sound and has a smooth and deep tone which testifies that it gives an unparalleled performance. Protected with 100% stainless steel, Magnaflow truly gives your system the absolute defense against dust and corrosion but most importantly it provides long lasting built for your product. When you take performance seriously this system which is located after the catalytic converter truly gives you more when it comes to looks, sounds, and power.

Features and Benefits:

• Gives out a smooth and deep tone with its fully polished mufflers
• Dyno-proven mandrel-bent tubes which boost performance gains in both torque and horsepower
• Made with 100% stainless steel for maximum protection

Specifications:

• Cat-back system
• Single exit, straight out the back
• 2.25 in. piping diameter
• Single inlet and outlet muffler configuration
• Moderate sound level
• Single 4 in. polished stainless steel tip
• Resonator, mounting hardware included
• 5 x 8 x 14 in. muffler; 4 x 14 in. resonator

Fits the following 1995-1998 Mitsubishi Eclipse submodels:

• 1996-1998: Spyder GST; 4 Cyl 2.0L;
• 1995-1998: GS; 4 Cyl 2.0L;

• 1995-1998: GST; 4 Cyl 2.0L;

• 1995-1998: GSX; 4 Cyl 2.0L;

• 1995-1998: RS; 4 Cyl 2.0L;

• 1996-1997: Base; 4 Cyl 2.0L;

Fits 4 more submodels. (Show all) Show less info

Pacesetter Monza Performance

With the precision engineering of Pacesetter, Monza Performance Exhaust System is born. It is made of 16-gauge aluminized steel that is made larger than the stock system. The pipes are mandrel-bent to reduce a large amount of back pressure followed by a high-flow muffler to make a fast exhaust exit which will efficiently add extra power to your vehicle. This exhaust system will surely make a great look with its corrosion-resistant black paint and partnered with stainless steel tips.

Features and benefits:

• 16-gauge aluminized steel
• Large high flow muffler
• Mandrel-bend tubing
• Corrosion-resistant black paint
• Comes complete with mounting hardware for easy installation
• Stainless Steel Monza Premium Exhaust tips included
• Backed by a 3 Year Warranty

Specifications:

• Cat-back system
• Single exit, straight out the back
• 2.5 in. piping diameter
• Single inlet and outlet muffler configuration
• Single 4 in. chrome stainless steel tip
• Mounting hardware included

Fits the following 1990-1991 Plymouth Laser submodels:

• 1990-1991: Base; 4 Cyl 1.8L; "GAS, FI, Naturally Aspirated, VIN T"
• 1990-1991: RS; All Engines;

Pacesetter Monza Performance

With the precision engineering of Pacesetter, Monza Performance Exhaust System is born. It is made of 16-gauge aluminized steel that is made larger than the stock system. The pipes are mandrel-bent to reduce a large amount of back pressure followed by a high-flow muffler to make a fast exhaust exit which will efficiently add extra power to your vehicle. This exhaust system will surely make a great look with its corrosion-resistant black paint and partnered with stainless steel tips.

Features and benefits:

• 16-gauge aluminized steel
• Large high flow muffler
• Mandrel-bend tubing
• Corrosion-resistant black paint
• Comes complete with mounting hardware for easy installation
• Stainless Steel Monza Premium Exhaust tips included
• Backed by a 3 Year Warranty

Specifications:

• Cat-back system
• Single exit, straight out the back
• 2.5 in. piping diameter
• Single inlet and outlet muffler configuration
• Single 4 in. chrome stainless steel tip
• Mounting hardware included

Fits the following 1992-1994 Mitsubishi Eclipse submodels:

• 1994-1994: GSX; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN F"
• 1993-1994: GS; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN E"

• 1993-1994: GS; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN F"

• 1993-1994: GST; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN F"

• 1992-1994: Base; All Engines;

• 1992-1993: GSX; All Engines;

• 1992-1992: GS; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN R"

• 1992-1992: GS; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN U"

• 1992-1992: GST; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN U"

Fits 7 more submodels. (Show all) Show less info

Original Equipment

Fits the following 1995-1999 Mitsubishi Eclipse submodels:

• 1995-1999: All Submodels; All Engines;

AEM V2 AIR INDUCTION SYSTEM

AEM's V2 Air Induction System utilizes a dual chamber design which uses two different diameters and lengths of piping to create multiple frequency sound waves, producing the largest area under the curve of any intake system on the market. Helps charge the cylinders with more air throughout the entire RPM range, outperforming every intake system in the market.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Titanium tube finish
• T-6063 aluminum tube material

Features

• Up to 99.52% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Fits the following 1995-1999 Mitsubishi Eclipse submodels:

• 1996-1999: Spyder GST; 4 Cyl 2.0L;
• 1995-1999: GS; 4 Cyl 2.0L;

• 1995-1999: GST; 4 Cyl 2.0L;

• 1995-1999: GSX; 4 Cyl 2.0L;

• 1995-1999: RS; 4 Cyl 2.0L;

• 1996-1997: Base; 4 Cyl 2.0L;

Fits 4 more submodels. (Show all) Show less info

AIR LIFT WIRELESSONE ON BOARD AIR COMPRESSOR SYSTEM -- Consists of standard duty compressor, wireless manifold, wiring manifold harness, wireless digital controller, air line, air fittings, and mounting hardware; Able to inflate and deflate two air springs at the same time; Remote control allows for making adjustments in full view of the vehicle; Also features low air pressure sensor that automatically activates to maintain minimum required pressure levels.

Fits the following 1995-2013 Toyota Tacoma submodels:

• 2013-2013: Base; 6 Cyl 4.0L;
• 1995-2012: All Submodels; All Engines;

AIR LIFT LOAD CONTROLLER DUAL ON BOARD AIR COMPRESSOR SYSTEM -- Consists of heavy duty compressor, analog dual gauge, wiring harness, low pressure sensors, check valves, air lines, air fittings, and other mounting hardware; Able to rapidly inflate and deflate two air springs independently of each other while on the go; Features low air pressure sensors that automatically activate to maintain minimum required pressure levels; Ideal for light to medium duty applications.

Fits the following 1995-2013 Toyota Tacoma submodels:

• 2013-2013: Base; 6 Cyl 4.0L;
• 1995-2012: All Submodels; All Engines;

AIR LIFT LOAD CONTROLLER SINGLE ON BOARD AIR COMPRESSOR SYSTEM -- Consists of heavy duty compressor, analog single gauge, low pressure sensor, wiring harness, air lines, air fittings, and other mounting hardware; Able to rapidly inflate and deflate two air springs at the same time while on the go; Features low air pressure sensor that automatically activates to maintain minimum required pressure levels; Ideal for light to medium duty applications.

Fits the following 1995-2013 Toyota Tacoma submodels:

• 2013-2013: Base; 6 Cyl 4.0L;
• 1995-2012: All Submodels; All Engines;

AIR LIFT LOAD CONTROLLER DUAL ON BOARD AIR COMPRESSOR SYSTEM -- Consists of standard duty compressor, analog dual gauge, wiring harness, low pressure sensors, check valves, air lines, air fittings, and other mounting hardware; Able to inflate and deflate two air springs independently of each other while on the go; Features low air pressure sensors that automatically activate to maintain minimum required pressure levels; Ideal for light to medium duty applications.

Fits the following 1995-2013 Toyota Tacoma submodels:

• 2013-2013: Base; 6 Cyl 4.0L;
• 1995-2012: All Submodels; All Engines;

AIR LIFT LOAD CONTROLLER SINGLE ON BOARD AIR COMPRESSOR SYSTEM -- Consists of standard duty compressor, analog single gauge, low pressure sensor, wiring harness, air lines, air fittings, and other mounting hardware; Able to inflate and deflate two air springs at the same time while on the go; Features low air pressure sensor that automatically activates to maintain minimum required pressure levels; Ideal for light to medium duty applications.

Fits the following 1995-2013 Toyota Tacoma submodels:

• 2013-2013: Base; 6 Cyl 4.0L;
• 1995-2012: All Submodels; All Engines;

AIR LIFT QUICK SHOT ON BOARD AIR COMPRESSOR KIT -- Consists of a heavy duty air compressor, a single gauge control panel with 2 control switches, a 2-gallon reserve tank and an easy-to-connect auxiliary air line; This premium air compressor kit moves air into your suspension air bags 4 times faster than conventional systems; Also usable for adjusting tires and filling air toys; With Air Lift's limited 2-year warranty.

Fits the following 1995-2013 Toyota Tacoma submodels:

• 2013-2013: Base; 6 Cyl 4.0L;
• 1995-2012: All Submodels; All Engines;