Hummer Intakes

K&N 57 SERIES GENERATION II FIPK COLD AIR INTAKE SYSTEM -- Provides additional power up to 18.57 h.p. at 6001 RPM; 96 to 99 percent filtration efficiency; Includes black roto molded intake tube, red air filter, heat shield, and all the necessary hardware for installation; Fuel injection performance kit; Features high density polyethylene intake tube that is custom engineered and aerodynamically designed to drive air into your engine; Its washable and reusable air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow; Comes with a heat shield that is custom designed to isolate and provide cooler air; Virtually eliminates intake tract restriction by replacing the air filter and the entire air path to the engine; Can go up to 100,000 miles between cleanings depending on driving conditions; C.A.R.B. exempted with E.O. number D-269-34, street legal in all 50 US states; Easy to install; With K&N's limited million mile warranty.

Fits the following 2006 Hummer H3 submodels:

• 2006-2006: Base; 5 Cyl 3.5L;

K&N 77 SERIES HIGH FLOW PERFORMANCE AIR INTAKE KIT, POLISHED -- Replaces Factory Air Filter And Air Box, Designed For Trucks And SUVs, Provides An Additional 16.46 Horsepower At 5851 Rpm, Increases Fuel Mileage, Comes With A Larger Filter Area That Can Increase Service Intervals Up To 100, 000 Miles, Computer Systems Compatible, Easy Installation, With Manufacturer's Limited Million Mile Warranty

Fits the following 2006 Hummer H3 submodels:

• 2006-2006: Base; 5 Cyl 3.5L;

K&N 63 SERIES AIRCHARGER COLD AIR INTAKE KIT -- Provides Additional Power Up To 10.97 hp At 4754 RPM, 96%-99% Filtration Efficiency Rate, This Aircharger Kit Represents A Significant Improvement Over A K&N OE Replacement Filter Alone, It Features A Non-Metallic Rotationally Molded Tubes That Can Reduce Intake Air Temperature And Decrease Intake Sound Over A Metal Tube, Street Legal In Most States But Not Legal In California, Comes With A Washable And Reusable Filter That Lasts Longer, Heat Shield Included, With K&N's Limited Million Mile Warranty

Fits the following 2009 Hummer H3T submodels:

• 2009-2009: Base; 5 Cyl 3.7L;

K&N 77 SERIES HIGH FLOW PERFORMANCE AIR INTAKE KIT -- Provides additional power up to 9.75 h.p. at 4558 RPM; 96 to 99 percent filtration efficiency; Includes polished intake tube, black heat shield, red air filter, and all the necessary hardware for installation; Metal intake kit; Features T-6063 aluminum intake tube that is custom engineered and aerodynamically designed to drive air into your engine; Its washable and reusable air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow; Comes with a heat shield that is custom designed to isolate and provide cooler air; Virtually eliminates intake tract restriction by replacing the air filter and the entire air path to the engine; Can go up to 100,000 miles between cleanings depending on driving conditions; C.A.R.B. exempted, street legal in all 50 US states; Easy to install; With K&N's limited million mile warranty.

Fits the following 2003-2007 Hummer H2 submodels:

• 2003-2007: Base; 8 Cyl 6.0L;

K&N 57 SERIES GENERATION II FIPK COLD AIR INTAKE SYSTEM -- 50-state legal, C.A.R.B. exempted with E.O. number D-269-34; Provides additional power up to 11.42 h.p. at 4524 RPM; 96 to 99 percent filtration efficiency; Includes black roto molded intake tube, red air filter, heat shield, and all the necessary hardware for installation; Fuel injection performance kit; Features high density polyethylene intake tube that is custom engineered and aerodynamically designed to drive air into your engine; Its washable and reusable air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow; Comes with a heat shield that is custom designed to isolate and provide cooler air; Virtually eliminates intake tract restriction by replacing the air filter and the entire air path to the engine; Can go up to 100,000 miles between cleanings depending on driving conditions; Easy to install; With K&N's limited million mile warranty.

Fits the following 2003-2007 Hummer H2 submodels:

• 2003-2007: Base; 8 Cyl 6.0L;

K&N 77 SERIES HIGH FLOW PERFORMANCE AIR INTAKE KIT -- Street legal in most states but not legal in California; Provides additional power up to 7.19 h.p. at 4533 RPM; 96 to 99 percent filtration efficiency; Includes polished intake tube, red air filter, heat shield, and all the necessary hardware for installation; Metal intake kit; Features T-6063 aluminum intake tube that is custom engineered and aerodynamically designed to drive air into your engine; Its washable and reusable air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow; Comes with a heat shield that is custom designed to isolate and provide cooler air; Virtually eliminates intake tract restriction by replacing the air filter and the entire air path to the engine; Can go up to 100,000 miles between cleanings depending on driving conditions; Easy to install; With K&N's limited million mile warranty.

Fits the following 2009 Hummer H3T submodels:

• 2009-2009: Base; 5 Cyl 3.7L;

AEM BRUTE FORCE AIR INDUCTION SYSTEM, POLISHED -- Dyno Tuned To Produce Maximum Horsepower And Torque By Locating The Air Filter In The Coolest And Safest Location Of The Engine Compartment, 50 State Legal, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced Tig-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Includes Carbon-Black Powdercoated Steel Heat Shield When Applicable, Guaranteed For Life Of The Vehicle By AEM

Fits the following 2006 Hummer H3 submodels:

• 2006-2006: Base; 5 Cyl 3.5L; "GAS, FI, VIN 6"

AEM BRUTE FORCE AIR INDUCTION SYSTEM, POLISHED -- Dyno Tuned To Produce Maximum Horsepower And Torque By Locating The Air Filter In The Coolest And Safest Location Of The Engine Compartment, 50 State Legal, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced Tig-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Includes Carbon-Black Powdercoated Steel Heat Shield When Applicable, Guaranteed For Life Of The Vehicle By AEM

Fits the following 2003-2005 Hummer H2 submodels:

• 2003-2005: Base; 8 Cyl 6.0L; "GAS, FI, VIN U"

AEM BRUTE FORCE AIR INDUCTION SYSTEM, POWDERCOATED SILVER -- Dyno Tuned To Produce Maximum Horsepower And Torque By Locating The Air Filter In The Coolest And Safest Location Of The Engine Compartment, 50 State Legal, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced TIG-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Includes Carbon-Black Powdercoated Steel Heat Shield When Applicable, Guaranteed For Life Of The Vehicle By AEM

Fits the following 2003-2005 Hummer H2 submodels:

• 2003-2005: Base; 8 Cyl 6.0L; "GAS, FI, VIN U"

AEM BRUTE FORCE AIR INDUCTION SYSTEM, POWDERCOATED SILVER -- Dyno Tuned To Produce Maximum Horsepower And Torque By Locating The Air Filter In The Coolest And Safest Location Of The Engine Compartment, 50 State Legal, Manufactured And Assembled In The USA, Utilizes AEM's 99.52% Efficient Dryflow Synthetic Air Filter Which Never Needs Filter Oil, The Mandrel Bent Inlet Pipe Is Constructed Out Of Lightweight 6063 Aluminum With Reinforced TIG-Welded Brackets And Fittings For Added Durability, Includes A Complete Mounting Kit For A Perfect Fit, Comprehensive Installation Instructions And Decals, Includes Carbon-Black Powdercoated Steel Heat Shield When Applicable, Guaranteed For Life Of The Vehicle By AEM

Fits the following 2006 Hummer H3 submodels:

• 2006-2006: Base; 5 Cyl 3.5L; "GAS, FI, VIN 6"

1000 SERIES COLD AIR INTAKE SYSTEM, HIGH PERFORMANCE, POLISHED -- Up To 8.8 Horsepower Gain At 5100 RPM, Made Of 6061 Aluminum, Provides More Power Throughout The Vehicle's Full RPM Range Using Mandrel Bent Piping And A Reusable High Flowing Air Filter, C.A.R.B. Exemption Pending In California, Comes With All The Hardware Needed For Easy Installation, Includes A Limited Lifetime Warranty

Fits the following 2003-2005 Hummer H2 submodels:

• 2003-2004: Base; 8 Cyl 6.0L; "GAS, FI"
• 2005-2005: Base; 8 Cyl 6.0L; "DIESEL, FI"

AFE MAGNUM FORCE STAGE 2 COLD AIR INTAKE SYSTEM -- Replaces OE Air Box, Filter And Factory Intake Tube, Gains Up To 50 Hp, Increases Ft/Lbs Of Torque, Improves Airflow Up To 75%, Fuel Efficiency And Throttle Response, Uses Factory Mounting Points, Easy Installation Guaranteed

Fits the following 2003-2007 Hummer H2 submodels:

• 2003-2007: Base; 8 Cyl 6.0L; "GAS, FI, VIN U"

AFE STAGE 1 CLASSIC (Cx) COLD AIR INTAKE SYSTEM, PRO DRY S AIR FILTER -- Bold, Aggressive Performance In A Simple Package, Retains Stock Intake Tube, Includes A 360%XBA Radial Air Filter, Provides A Throaty Performance Sound, Easy Installation, Uses A Revolutionary Two-Ply Synthetic Air Filter With Oil Free Material That Is Functionally Superior To Traditional Paper Media And Single-Ply Synthetic, 99.4% Filtration Levels

Fits the following 2003-2007 Hummer H2 submodels:

• 2003-2007: Base; 8 Cyl 6.0L; "GAS, FI, VIN U"

AFE STAGE 2 COLD AIR INTAKE SYSTEM -- Engineered To Deliver Maximum Performance Within Stock Engine Configuration, Replaces Both Stock Air Box And Intake Piping, Custom Air Tube Accelerates And Enhances Airflow For More Power, Includes A Large Washable/Reusable Filter For Great Airflow, Provides Aggressive Performance Sound, Simple Installation

Fits the following 2006 Hummer H3 submodels:

• 2006-2006: Base; 5 Cyl 3.5L; "GAS, FI, VIN 6"

AIRAID JR INTAKE KIT -- This System Is A Combination Of Premium Direct-Fit Replacement Filter And Modular Intake Tube, Comes Complete With All The Necessary Mounting Hardware And Easy To Follow Installation Instructions, Features Simple Design And Function For Easy Installation, Includes Airaid's Lifetime No Hassle Warranty

Fits the following 2003-2007 Hummer H2 submodels:

• 2003-2007: Base; 8 Cyl 6.0L; "GAS, FI, VIN U"