Mazda Load Leaf Spring Performance

BELLTECH LEAF SPRING, LINEAR, SOLD INDIVIDUALLY -- Provides 3 in. rear drop; Includes high quality OE-style rubber bushings; This leaf spring directly replaces the stock to lower your vehicle.

Fits the following 1987-1993 Mazda B2600 submodels:

• 1990-1993: LE-5; 4 Cyl 2.6L;
• 1990-1993: SE-5; 4 Cyl 2.6L;

• 1987-1993: Base; 4 Cyl 2.6L;

• 1987-1989: LX; 4 Cyl 2.6L;

Fits 2 more submodels. (Show all) Show less info

BELLTECH LEAF SPRING, LINEAR, SOLD INDIVIDUALLY -- Provides 3 in. rear drop; Includes high quality OE-style rubber bushings; This leaf spring directly replaces the stock to lower your vehicle.

Fits the following 2001-2004 Mazda B2300 submodels:

• 2002-2004: Base; 4 Cyl 2.3L;
• 2001-2004: SE; 4 Cyl 2.3L;

• 2001-2001: SX; 4 Cyl 2.3L;

Fits 1 more submodels. (Show all) Show less info

ENERGY SUSPENSION LEAF SPRING BUSHING SET, RED -- Enough for 2 leaf springs and their shackles; Consists of two large 2-piece bushings with center sleeves and four small 2-piece bushings with center sleeves; Made of Hyper-Flex performance polyurethane for higher firmness and exceptional resistance to oil, coolant, and road contaminants; Offers noticeable gains in control during initial acceleration, making turns, braking, and going over bumps and potholes.

Fits the following 1994-1997 Mazda B4000 submodels:

• 1994-1997: All Submodels; All Engines;

ENERGY SUSPENSION LEAF SPRING BUSHING SET, BLACK -- Enough for 2 leaf springs and their shackles; Consists of two large 2-piece bushings with center sleeves and four small 2-piece bushings with center sleeves; Made of Hyper-Flex performance polyurethane for higher firmness and exceptional resistance to oil, coolant, and road contaminants; Offers noticeable gains in control during initial acceleration, making turns, braking, and going over bumps and potholes.

Fits the following 1994-1997 Mazda B4000 submodels:

• 1994-1997: All Submodels; All Engines;

ENERGY SUSPENSION LEAF SPRING BUSHING SET, RED -- Enough for 2 leaf springs and their shackles; Consists of two large 2-piece bushings with center sleeves, two small 2-piece bushings with center sleeves, two thrust washers, and 2 Formula 5 Prelube tubes; Made of Hyper-Flex performance polyurethane for higher firmness and exceptional resistance to oil, coolant, and road contaminants; Offers noticeable gains in control during initial acceleration, making turns, braking, and going over bumps and potholes.

Fits the following 1991-1994 Mazda Navajo submodels:

• 1991-1994: All Submodels; All Engines;

HELLWIG LP-15 HELPER SPRING KITS, LEAF SPRING TYPE, SET OF 2 -- Bolts on to stock leaf springs; Provides up to 1,500 lbs. of level load capacity; Consists of 2 helper springs for back half, heavy duty U-bolts and other mounting hardware; Springs are made of ASTM 5150 alloy spring steel; These kits adjustable so that you can fine-tune your suspension to suit your load requirements; Offers increased stability and eliminates rear end sagging; Factory ride is unaffected when vehicle is unloaded; For heavier loads, we recommend the LP-25 or LP-35 series; This product is not designed to be used for exceeding the manufacturer's maximum gross vehicle weight rating.

Fits the following 1991-1994 Mazda Navajo submodels:

• 1991-1994: All Submodels; All Engines;

HELLWIG EZ-1000 HELPER SPRING KIT, LEAF SPRING TYPE -- Enough for 2 leaf springs; Includes mounting hardware; Bolts on to stock leaf springs; Provides up to 1,000 lbs. of level load capacity; Ensures a safer ride by giving you more stability through level load management; Eliminates rear end sagging; Easy to install; Best for lighter cargo; For heavier loads, we recommend the LP series; This product is not designed to be used for exceeding the manufacturer's maximum gross vehicle weight rating.

Fits the following 1994-2007 Mazda B2300 submodels:

• 1994-2007: All Submodels; All Engines;

HELLWIG LP-15 HELPER SPRING KIT, LEAF SPRING TYPE -- Enough for 2 leaf springs; Bolts on to stock leaf springs; Provides up to 1,500 lbs. of level load capacity; Consists of 4 helper springs for both sides of the axle, heavy duty U-bolts and other mounting hardware; Springs are made of ASTM 5150 alloy spring steel; This kit is adjustable so that you can fine-tune your suspension to suit your load requirements; Offers increased stability and eliminates rear end sagging; Factory ride is unaffected when vehicle is unloaded; Not for use with composite/plastic springs; For heavier loads, we recommend the LP-25 or LP-35 series; This product is not designed to be used for exceeding the manufacturer's maximum gross vehicle weight rating.

Fits the following 1987-1993 Mazda B2200 submodels:

• 1987-1993: All Submodels; All Engines;

HELLWIG EZ-550 HELPER SPRING KIT, LEAF SPRING TYPE -- Enough for 2 leaf springs; Includes mounting hardware; Bolts on to stock leaf springs; Provides up to 500 lbs. of level load capacity; Ensures a safer ride by giving you more stability through level load management; Eliminates rear end sagging; Easy to install; Best for lighter cargo; For heavier loads, we recommend the LP series; This product is not designed to be used for exceeding the manufacturer's maximum gross vehicle weight rating.

Fits the following 1994-2007 Mazda B2300 submodels:

• 1994-2007: All Submodels; All Engines;

HELLWIG LP-15 HELPER SPRING KIT, LEAF SPRING TYPE -- Enough for 2 leaf springs; Bolts on to stock leaf springs; Provides up to 1,500 lbs. of level load capacity; Consists of 4 helper springs for both sides of the axle, heavy duty U-bolts and other mounting hardware; Springs are made of ASTM 5150 alloy spring steel; This kit is adjustable so that you can fine-tune your suspension to suit your load requirements; Offers increased stability and eliminates rear end sagging; Factory ride is unaffected when vehicle is unloaded; Not for use with composite/plastic springs; For heavier loads, we recommend the LP-25 or LP-35 series; This product is not designed to be used for exceeding the manufacturer's maximum gross vehicle weight rating.

Fits the following 1994-1997 Mazda B4000 submodels:

• 1994-1997: All Submodels; All Engines;

HELLWIG EZ-990 HELPER SPRING KIT, LEAF SPRING TYPE -- Enough for 2 leaf springs; Includes mounting hardware; Bolts on to stock leaf springs, beneath axle U-bolt plates; Provides up to 2,000 lbs. of level load capacity; Can be adjusted independently for uneven loads; This product does not increase maximum gross vehicle weight rating.

Fits the following 1994-2007 Mazda B2300 submodels:

• 1994-2007: All Submodels; All Engines;

HELLWIG LP-15 HELPER SPRING KIT, LEAF SPRING TYPE -- Enough for 2 leaf springs; Bolts on to stock leaf springs; Provides up to 1,500 lbs. of level load capacity; Consists of 4 helper springs for both sides of the axle, heavy duty U-bolts and other mounting hardware; Springs are made of ASTM 5150 alloy spring steel; This kit is adjustable so that you can fine-tune your suspension to suit your load requirements; Offers increased stability and eliminates rear end sagging; Factory ride is unaffected when vehicle is unloaded; Not for use with composite/plastic springs; For heavier loads, we recommend the LP-25 or LP-35 series; This product is not designed to be used for exceeding the manufacturer's maximum gross vehicle weight rating.

Fits the following 2001-2007 Mazda B2300 submodels:

• 2001-2007: All Submodels; All Engines;

DORMAN LEAF SPRING SHACKLE, POWDERCOATED, SOLD INDIVIDUALLY -- Includes bushing and mounting hardware; This high quality leaf spring shackle directly replaces OE number E6TZ 5776-B and ZZM0-28-144.

Fits the following 1994-2007 Mazda B4000 submodels:

• 2002-2007: Base; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN E"
• 2001-2007: SE; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN E"

• 2001-2004: DS; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN E"

• 2000-2000: Troy Lee; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

• 1994-2000: SE; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

• 1997-1997: Base; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

• 1994-1996: LE; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

Fits 5 more submodels. (Show all) Show less info

DORMAN LEAF SPRING BRACKET, POWDERCOATED, SOLD INDIVIDUALLY -- Includes mounting hardware; This high quality leaf spring bracket directly replaces OE number 4L5Z-5775-AA or ZZM0-28-205.

Fits the following 1994-2007 Mazda B4000 submodels:

• 2002-2007: Base; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN E"
• 2001-2007: SE; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN E"

• 2001-2004: DS; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN E"

• 2000-2000: Troy Lee; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

• 1994-2000: SE; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

• 1997-1997: Base; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

• 1994-1996: LE; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

Fits 5 more submodels. (Show all) Show less info

BELLTECH HANGER KIT, POWDERCOATED -- Provides 4 in. drop; Includes mounting hardware; Lowers your vehicle while maintaining ride quality; Constructed from heavy gauge die stamped steel to insure a perfect fit and superior quality; With Belltech's limited lifetime warranty.

Fits the following 1994-1997 Mazda B2300 submodels:

• 1995-1997: SE; 4 Cyl 2.3L;
• 1994-1996: Base; 4 Cyl 2.3L;