Pontiac Headers

PACESETTER HEADERS, STEEL, BLACK-PAINTED -- 50-state legal, C.A.R.B. certified; 1.5 in. tube diameter, 16-gauge tube wall thickness, 2.5 in. flange collector, 0.375 in. standard head flange; Includes gaskets, hardware, illustrated instructions, and header extension to connect to stock system; Mid-length style; Round head port; These easy-to-clean headers feature mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boost performance and increase engine efficiency; Hook-ups for smog and engine management sensors; Fabrication may be required; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle; With Pacesetter's 3-year warranty.

Fits the following 1995-2002 Pontiac Firebird submodels:

• 1995-2002: Base; 6 Cyl 3.8L;

PACESETTER QUIK-TRIP LONG TUBE HEADERS, BLACK -- Features 1-3/4 Mandrel-Bent Flash-Controlled 16-Gauge Carbon Steel Primary Tubing That Provides Greater Durability And Enters 3 Collector In Proper Sequence For Maximum Scavenging, With Optimized Length And Diameter For Flow And Best Performance Increase, Comes With 3/8-Thick Steel Flanges That Are Matched To Exhaust Port Profile For Optimum Seal And Flow, Made In USA, Complete With Oxygen Sensor Fitting, Necessary Gaskets, And Fasteners For Installation, Recommended For Off Road Use Only

Fits the following 1998-1999 Pontiac Firebird submodels:

• 1998-1998: Firehawk; 8 Cyl 5.7L; "LS1"
• 1998-1999: Formula; 8 Cyl 5.7L; "LS1"

• 1998-1999: Trans Am; 8 Cyl 5.7L; "LS1"

Fits 1 more submodels. (Show all) Show less info

PACESETTER HEADERS, SILVER ARMOR-COATED -- Shorty Headers, 1.5 in. Primary Tubing Diameter, 16-Gauge Primary Tube Wall Thickness, 3 in. Stock Flange Collector, These Easy-To-Clean Headers Feature Mandrel-Bent Mild Steel Primary Tubing That Is Armor-Coated To Provide A Polished 2000-Degree Fahrenheit High-Temperature Metallic Ceramic Finish, This Special Armor-Coating Reduces Underhood Temperature And Resists Rust And Corrosion, Unlike The Ordinary Paint, Chrome, Or Dull Finish Coating, Armor-Coating Will Not Discolor Providing A Long-Lasting Great-Look, Hook-Ups For Smog And Engine Management Sensors, Comes With Header Extension To Connect To Stock System, Fabrication May Be Required, 50-State Legal, Not Legal For Use On Catalyst-Equipped Vehicles Except For Racing Vehicles Which May Not Be Operated On A Highway, Pre-Catalyst Vehicles Must Use Original Emission Control Devices, It Is The Responsibility Of The Customer To Reinstall These Devices On The Vehicle, Comes With Gasket, Reducers, And 0.375 in. Standard Head Flange, With Pacesetter's 3-Year Warranty

Fits the following 2002-2004 Pontiac Grand Am submodels:

• 2002-2003: GT1; 4 Cyl 2.2L;
• 2002-2003: GT; 4 Cyl 2.2L;

• 2002-2003: SE1; 4 Cyl 2.2L;

• 2002-2004: SE; 4 Cyl 2.2L;

• 2003-2003: SE2; 4 Cyl 2.2L;

Fits 3 more submodels. (Show all) Show less info

PACESETTER MID-TUBE HEADERS, ARMOR COAT -- Features 1-5/8 Mandrel-Bent Primary Tubing, Comes With Oversized Flange Ports That Are CNC-Machined To Match Cylinder Head And Allow For Mild Head Porting, Utilizes Pacesetter's Armor Coating That Provides A Polished 2000%XB0F High Temperature Metallic-Ceramic Finish, Reduces Underhood Temperatures, Resists Rust And Corrosion, Easy To Clean, Retains Stock Converter And All Pollution Control And Engine Management Hook Ups, Made In USA, 50-State Legal, Please Allow 10-12 Business Days To Ship Due To The Coating Process

Fits the following 2000-2002 Pontiac Firebird submodels:

• 2000-2002: Formula; 8 Cyl 5.7L; "LS1"
• 2000-2002: Trans Am; 8 Cyl 5.7L; "LS1"

PACESETTER HEADERS, BLACK -- Features 1-1/2 Mandrel-Bent 16-Gauge Mild Steel Primary Tubing And 3 Surface-Ground Thick Steel Flanged Collector, With Hook-Ups For Smog And Engine Management Sensors, Comes With Header Extension To Connect To Stock System, May Require Fabrication, Includes Hardware, Gaskets, And Illustrated Installation Instructions, Header Bolts Not Included, 50-State Legal, Recommended For Off Road Use Only, With Manufacturer's 3-Year Warranty

Fits the following 1999-2002 Pontiac Sunfire submodels:

• 1999-2002: GT; 4 Cyl 2.4L;
• 1999-2002: SE; 4 Cyl 2.4L;

PACESETTER MID-TUBE HEADERS, BLACK -- Features 1-5/8 Mandrel-Bent Primary Tubing, Comes With Oversized Flange Ports That Are CNC-Machined To Match Cylinder Head And Allow For Mild Head Porting, Retains Stock Converter And All Pollution Control And Engine Management Hook Ups, Made In USA, 50-State Legal

Fits the following 1998-1999 Pontiac Firebird submodels:

• 1998-1998: Firehawk; 8 Cyl 5.7L; "LS1"
• 1998-1999: Formula; 8 Cyl 5.7L; "LS1"

• 1998-1999: Trans Am; 8 Cyl 5.7L; "LS1"

Fits 1 more submodels. (Show all) Show less info

PACESETTER QUIK-TRIP LONG TUBE HEADERS, ARMOR COAT -- Features 1-3/4 Mandrel-Bent Primary Tubing, Comes With Oversized Flange Ports That Are CNC-Machined To Match Cylinder Head And Allow For Mild Head Porting, Utilizes Pacesetter's Armor Coating That Provides A Polished 2000%XB0F High Temperature Metallic-Ceramic Finish, Reduces Underhood Temperatures, Resists Rust And Corrosion, Easy To Clean, Made In USA, Easy Installation, Recommended For Off Road Use Only, Please Allow 10-12 Business Days To Ship Due To The Coating Process

Fits the following 1996-1997 Pontiac Firebird submodels:

• 1996-1997: Formula; 8 Cyl 5.7L;
• 1996-1997: Trans Am; 8 Cyl 5.7L;

PACESETTER HEADERS, BLACK -- Features 1-1/2 Mandrel-Bent 16-Gauge Mild Steel Primary Tubing And 3 Surface-Ground Thick Steel Flanged Collector, With Hook-Ups For Smog And Engine Management Sensors, Comes With Header Extension To Connect To Stock System, May Require Fabrication, Includes Hardware, Gaskets, And Illustrated Installation Instructions, Header Bolts Not Included, 50-State Legal, Recommended For Off Road Use Only, With Manufacturer's 3-Year Warranty

Fits the following 1996-1998 Pontiac Sunfire submodels:

• 1996-1998: GT; 4 Cyl 2.4L;
• 1996-1998: SE; 4 Cyl 2.4L;

PACESETTER QUIK-TRIP LONG TUBE HEADERS, BLACK -- Features 1-3/4 Mandrel-Bent Flash-Controlled 16-Gauge Carbon Steel Primary Tubing That Provides Greater Durability And Enters 3 Collector In Proper Sequence For Maximum Scavenging, With Optimized Length And Diameter For Flow And Best Performance Increase, Comes With 3/8-Thick Steel Flanges That Are Matched To Exhaust Port Profile For Optimum Seal And Flow, Made In USA, Complete With Oxygen Sensor Fitting, Necessary Gaskets, And Fasteners For Installation, Recommended For Off Road Use Only

Fits the following 1996-1997 Pontiac Firebird submodels:

• 1996-1997: Formula; 8 Cyl 5.7L;
• 1996-1997: Trans Am; 8 Cyl 5.7L;

PACESETTER QUIK-TRIP LONG TUBE HEADERS, BLACK -- Features 1-3/4 Mandrel-Bent Flash-Controlled 16-Gauge Carbon Steel Primary Tubing That Provides Greater Durability And Enters 3 Collector In Proper Sequence For Maximum Scavenging, With Optimized Length And Diameter For Flow And Best Performance Increase, Comes With 3/8-Thick Steel Flanges That Are Matched To Exhaust Port Profile For Optimum Seal And Flow, Made In USA, Complete With Oxygen Sensor Fitting, Necessary Gaskets, And Fasteners For Installation, Recommended For Off Road Use Only

Fits the following 1994-1995 Pontiac Firebird submodels:

• 1994-1994: Trans Am GT; 8 Cyl 5.7L;
• 1994-1995: Formula; 8 Cyl 5.7L;

• 1994-1995: Trans Am; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

PACESETTER HEADERS, STEEL, BLACK-PAINTED -- 50-state legal, C.A.R.B. certified E.O. D-439-6; 1.625 in. tube diameter, 16-gauge tube wall thickness, stock flange collector, 0.375 in. standard head flange; Gasket and installation hardware included; Mid-length style; Round head port; These easy-to-clean headers feature mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boost performance and increase engine efficiency; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle; With Pacesetter's 3-year warranty.

Fits the following 1994-1995 Pontiac Firebird submodels:

• 1994-1994: Trans Am GT; 8 Cyl 5.7L;
• 1994-1995: Formula; 8 Cyl 5.7L;

• 1994-1995: Trans Am; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

PACESETTER HEADERS, BLACK-PAINTED -- Mid-Length Headers, 1.5 in. Primary Tubing Diameter, 16-Gauge Primary Tube Wall Thickness, 2.25 in. 3-Bolt Flange Collector, These Easy-To-Clean Headers Feature Mandrel-Bent Mild Steel Primary Tubing That Is Black-Painted To Reduce Underhood Temperature And To Resist Rust And Corrosion, They Significantly Boost Performance And Increase Engine Efficiency, Hook-Ups For Smog And Engine Management Sensors, Comes With Header Extension To Connect To Stock System, Fabrication May Be Required, 50-State Legal, Not Legal For Use On Catalyst-Equipped Vehicles Except For Racing Vehicles Which May Not Be Operated On A Highway, Pre-Catalyst Vehicles Must Use Original Emission Control Devices, It Is The Responsibility Of The Customer To Reinstall These Devices On The Vehicle, Comes With Gasket, Reducers, And 0.375 in. Standard Head Flange, With Pacesetter's 3-Year Warranty

Fits the following 1993-1995 Pontiac Firebird submodels:

• 1993-1995: Base; 6 Cyl 3.4L;

PACESETTER QUIK-TRIP LONG TUBE HEADERS, ARMOR COAT -- Features 1-3/4 Mandrel-Bent Primary Tubing, Comes With Oversized Flange Ports That Are CNC-Machined To Match Cylinder Head And Allow For Mild Head Porting, Utilizes Pacesetter's Armor Coating That Provides A Polished 2000%XB0F High Temperature Metallic-Ceramic Finish, Reduces Underhood Temperatures, Resists Rust And Corrosion, Easy To Clean, Made In USA, Easy Installation, Recommended For Off Road Use Only, Please Allow 10-12 Business Days To Ship Due To The Coating Process

Fits the following 1993-1997 Pontiac Firebird submodels:

• 1993-1997: Formula; 8 Cyl 5.7L;
• 1993-1997: Trans Am; 8 Cyl 5.7L;

• 1994-1994: Trans Am GT; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

PACESETTER QUIK-TRIP HEADERS, BLACK-PAINTED -- Full-Length Headers, 1.75 in. Primary Tubing Diameter, 16-Gauge Primary Tube Wall Thickness, 3 in. Slip-Fit Collector, These US Made Easy-To-Clean Headers Feature Flash-Controlled 16 Gauge Carbon Steel Primaries That Provide Greater Durability Than Light Gauge Stainless Steel, They Significantly Boost Performance And Increase Engine Efficiency, Their CNC-Machined 0.375 in. Thick Steel Flanges Are Matched To Exhaust Port Profile For Optimum Seal And Flow, Off-Road Use Only, Comes With Bolts And Studs, Gasket, And 0.375 in. Standard Head Flange, With Pacesetter's 3-Year Warranty

Fits the following 1993-1997 Pontiac Firebird submodels:

• 1993-1997: Formula; 8 Cyl 5.7L;
• 1993-1997: Trans Am; 8 Cyl 5.7L;

• 1994-1994: Trans Am GT; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

PACESETTER HEADER, BLACK -- 1-1/2 Tubing Diameter, 2-1/4" Collector Diameter, Manufactured Using Mandrel Bent, Mild Steel Tubing And Surface Ground, Thick Steel Flanges, Constructed Through An Extensive Preparation Phase Followed By Two Applications Of Coating And High Temperature Curing Process, Comes With Hardware, Gaskets, And Illustrated Instructions, Header Bolts Not Included, With Pacesetter's 3 Year Warranty

Fits the following 1985-1989 Pontiac Firebird submodels:

• 1985-1986: S/E; 6 Cyl 2.8L;
• 1985-1989: Base; 6 Cyl 2.8L;