Brembo Brake Rotor

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Fits the following 2003-2011 Honda Accord submodels:

• 2011-2011: EX-L; All Engines;
• 2011-2011: EX; All Engines;

• 2008-2010: EX-L; 4 Cyl 2.4L;

• 2008-2010: EX-L; 6 Cyl 3.5L;

• 2008-2010: EX; 4 Cyl 2.4L;

• 2008-2010: EX; 6 Cyl 3.5L;

• 2003-2005: EX; 6 Cyl 3.0L;

Fits 5 more submodels. (Show all) Show less info

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Fits the following 2001-2006 BMW 325Ci submodels:

• 2001-2006: All Submodels; All Engines;

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Cross drilled

Fits the following 2000-2003 Mercedes Benz S500 submodels:

• 2003-2003: Base; All Engines;
• 2000-2002: All Submodels; All Engines;

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Fits the following 2003-2005 Mercedes Benz ML350 submodels:

• 2003-2005: All Submodels; All Engines;

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Fits the following 2001-2003 BMW 530i submodels:

• 2001-2003: All Submodels; All Engines;

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Fits the following 2001-2007 Volvo V70 submodels:

• 2004-2007: 2.4; All Engines;
• 2004-2007: 2.5T; All Engines;

• 2004-2005: T5; All Engines;

• 2004-2004: 2.5T AWD; All Engines;

• 2001-2003: All Submodels; All Engines;

Fits 3 more submodels. (Show all) Show less info

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Fits the following 2003-2008 BMW Z4 submodels:

• 2006-2008: Roadster 3.0i; All Engines;
• 2003-2005: 3.0i; All Engines;

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Fits the following 2003-2011 Chevrolet Express 1500 submodels:

• 2003-2011: All Submodels; All Engines;

BREMBO BRAKE DISC, VENTED, SOLD INDIVIDUALLY

Restore the braking performance of your vehicle with Brembo Brake Discs. Built with quality that earned Brembo its OEM fitments, these discs are guaranteed to meet OE fit, form, and function.

Specifications:

• 5 lugs
• 288 mm disc diameter
• 25 mm thickness
• 23 mm minimum thickness
• 46.2 mm height
• QS-9000, ISO 9001, and TUV/ABE certified

Features:

• Made from casting that came from Brembo facilities to ensure uniform thickness
• Coated for corrosion resistance
• Machined to exacting tolerances
• Electronically balanced to minimize vibration

Fits the following 1996-2003 Audi A4 submodels:

• 2003-2003: Cabriolet; 4 Cyl 1.8L; "GAS, FI, AMB, Turbocharged"
• 2003-2003: Cabriolet; 6 Cyl 3.0L; "GAS, FI, AVK, Naturally Aspirated, VIN T"

• 2002-2003: Base; 4 Cyl 1.8L; "GAS, FI, AMB, Turbocharged, VIN C"

• 2002-2003: Base; 6 Cyl 3.0L; "GAS, FI, AVK, Naturally Aspirated, VIN T"

• 2001-2001: Base; 4 Cyl 1.8L; "GAS, FI, AWM, Turbocharged, VIN C"

• 2000-2001: Base; 6 Cyl 2.8L; "GAS, FI, ATQ, Naturally Aspirated, VIN H"

• 2000-2000: Base; 4 Cyl 1.8L; "GAS, FI, ATW, Turbocharged, VIN C"

• 1998-1999: Base; 6 Cyl 2.8L; "GAS, FI, AHA, Naturally Aspirated, VIN D"

• 1997-1999: Base; 4 Cyl 1.8L; "Gas, FI, AEB, Turbocharged, VIN B"

• 1997-1997: Base; 6 Cyl 2.8L; "GAS, FI, AHA, Naturally Aspirated, VIN A"

• 1996-1997: Base; 6 Cyl 2.8L; "GAS, FI, AFC, Naturally Aspirated, VIN A"

Fits 9 more submodels. (Show all) Show less info

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Fits the following 2003-2011 Honda Element submodels:

• 2003-2011: All Submodels; All Engines;

BREMBO BRAKE DISC, SOLID, SOLD INDIVIDUALLY

Restore the braking performance of your vehicle with Brembo Brake Discs. Built with quality that earned Brembo its OEM fitments, these discs are guaranteed to meet OE fit, form, and function.

Specifications:

• 5 lugs
• 285 mm disc diameter
• 15 mm thickness
• 13 mm minimum thickness
• 55.2 mm height
• QS-9000, ISO 9001, and TUV/ABE certified

Features:

• Made from casting that came from Brembo facilities to ensure uniform thickness
• Coated for corrosion resistance
• Machined to exacting tolerances
• Electronically balanced to minimize vibration

Fits the following 1998-2002 Mercedes Benz ML320 submodels:

• 1999-2002: Base; 6 Cyl 3.2L; "GAS, FI, 112.942, Naturally Aspirated"
• 1998-1998: Base; 6 Cyl 3.2L; "Gas, FI, Naturally Aspirated"

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Fits the following 2003-2011 Saab 9-3 submodels:

• 2003-2011: All Submodels; All Engines;

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Fits the following 1992-2006 Toyota Camry submodels:

• 2005-2006: Base; 4 Cyl 2.4L;
• 2002-2006: LE; 4 Cyl 2.4L;

• 2002-2006: SE; 4 Cyl 2.4L;

• 2002-2006: XLE; 4 Cyl 2.4L;

• 1992-2006: LE; 6 Cyl 3.0L;

• 2000-2001: CE; 4 Cyl 2.2L;

• 2000-2001: LE; 4 Cyl 2.2L;

• 2000-2001: XLE; 4 Cyl 2.2L;

• 1992-2001: XLE; 6 Cyl 3.0L;

• 1997-1998: CE; 6 Cyl 3.0L;

• 1992-1996: SE; 6 Cyl 3.0L;

• 1993-1995: Base; 6 Cyl 3.0L;

• 1993-1993: DX; 6 Cyl 3.0L;

• 1992-1992: DLX; 6 Cyl 3.0L;

Fits 12 more submodels. (Show all) Show less info

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Fits the following 1991 Mercedes Benz 350SD submodels:

• 1991-1991: All Submodels; All Engines;

BREMBO BRAKE DISC, SOLID, SOLD INDIVIDUALLY

Restore the braking performance of your vehicle with Brembo Brake Discs. Built with quality that earned Brembo its OEM fitments, these discs are guaranteed to meet OE fit, form, and function.

Specifications:

• 5 lugs
• 306.8 mm disc diameter
• 10.5 mm minimum thickness
• 63.6 mm height
• QS-9000, ISO 9001, and TUV/ABE certified

Features:

• Made from casting that came from Brembo facilities to ensure uniform thickness
• Coated for corrosion resistance
• Machined to exacting tolerances
• Electronically balanced to minimize vibration

Fits the following 2002 Lexus SC430 submodels:

• 2002-2002: Base; 8 Cyl 4.3L; "GAS, FI, 3UZFE, Naturally Aspirated"