Hyundai Exhaust

EXHAUST MANIFOLD -- Without catalytic converter; A high quality, direct fit OE replacement exhaust manifold; Made of tough and durable material for strong resistance to harsh temperature condition, providing long-lasting life and service; Covered by a 1-year unlimited mileage warranty.

Fits the following 1999-2000 Hyundai Elantra submodels:

• 1999-1999: GL; 4 Cyl 2.0L; "GAS, FI, VIN F"
• 1999-1999: GLS; 4 Cyl 2.0L; "GAS, FI, VIN F"

• 2000-2000: GLS; 4 Cyl 2.0L; "GAS, FI"

Fits 1 more submodels. (Show all) Show less info

EXHAUST MANIFOLD -- A high quality, direct fit OE replacement; Made of tough and durable material for strong resistance to harsh temperature condition, providing long-lasting life and service; Proven to last longer than the other exhaust manifold brands that easily wear off; Covered by a 1-year unlimited mileage warranty.

Fits the following 1998 Hyundai Tiburon submodels:

• 1998-1998: Base; 4 Cyl 2.0L; "GAS, FI, G4CP, VIN F"
• 1998-1998: FX; 4 Cyl 2.0L; "GAS, FI, G4CP, VIN F"

BORLA CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- Increases power by 7 to 15 percent; 2.25 in. main piping diameter, 2 in. tailpipe diameter; Split rear exit; Three mufflers with single inlet and outlet configuration each; Includes installation hardware, gaskets, aluminized steel mufflers, and 4 in. x 8 in. dual polished stainless steel tips with round shape, angle-cut, and rolled-edge design; Made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent stainless steel that maintains low decibels and protects the vehicle against burnout; Dyno-proven to yield an increase in flow and power while providing better fuel economy; Insulated to reduce shell temperature for a cooler driver's compartment; Features a patented uninterrupted-flow design and multi-core technology; With longer spike for scavenging to generate maximum power; 50-state legal, C.A.R.B. certified; Easy bolt-on installation; With Borla's million-mile warranty.

Fits the following 2003-2006 Hyundai Tiburon submodels:

• 2003-2006: GT; 6 Cyl 2.7L;
• 2006-2006: SE; 6 Cyl 2.7L;

PACESETTER MONZA PERFORMANCE EXHAUST SYSTEM, ALUMINIZED STEEL, BLACK -- Cat-Back, Single Rear Exit, 2.25 in. Main Piping Diameter, 2.25 in. Tailpipe Diameter, 4 in. Tip Outlet Diameter, Includes Aluminized Steel Turbo Muffler With Single Inlet/Single Outlet Configuration And Single T304 Stainless Steel Round Exhaust Tip With Straight Cut And Rolled Edge Style, This Exhaust System Is Made From Corrosion-Resistant Aluminized Steel And Designed To Replace The Original Equipment Muffler System, It Utilizes The Right Combination Of Larger-Than-Stock 16-Gauge Mandrel-Bent Tubing And Low Back-Pressure High-Flow Performance Mufflers For Cooler And Smoother Engine Operation And Increased Performance, Comes With All The Necessary Hardware For A Complete Installation, With Pacesetter's 3-Year Warranty

Fits the following 1997 Hyundai Tiburon submodels:

• 1997-1997: Base; 4 Cyl 1.8L;

DORMAN EXHAUST MANIFOLD KIT -- Not for sale or use in California; Includes 4 bolts, 6 nuts, 1 manifold gasket, and 1 flange gasket; Cast iron construction; Engineered to perform better than the original OE design; Transports extremely hot exhaust gases with a temperature of up to 1400 degrees Fahrenheit from the cylinder head to the exhaust piping; Provides mounting for oxygen sensors, A.I.R. piping, and EGR piping; Seals the engine head and exhaust piping to prevent fumes and noise from escaping the engine compartment; Application-specific; Replacement for OE part number 28510-23431; With Dorman's limited lifetime warranty.

Fits the following 1999-2000 Hyundai Elantra submodels:

• 1999-1999: GL; 4 Cyl 2.0L; "GAS, FI, VIN F"
• 1999-1999: GLS; 4 Cyl 2.0L; "GAS, FI, VIN F"

• 2000-2000: GLS; 4 Cyl 2.0L; "GAS, FI"

Fits 1 more submodels. (Show all) Show less info

DORMAN EXHAUST MANIFOLD KIT -- Transports Extremely Hot Exhaust Gases With A Temperature Of Up To 1400 Degrees Fahrenheit From The Cylinder Head To The Exhaust Piping, Provides Mounting For Oxygen Sensors, A.I.R. Piping, And EGR Piping, Seals The Engine Head And Exhaust Piping To Prevent Fumes And Noise From Escaping The Engine Compartment, Application-Specific, Engineered To Perform Better Than The Original OE Design, Includes All The Necessary Hardware For A Complete Installation, Replacement For OE Part Number 28511-21321, With Dorman's Limited Lifetime Warranty

Fits the following 1989 Hyundai Excel submodels:

• 1989-1989: Base; 4 Cyl 1.5L; "GAS, CARB, VIN J"
• 1989-1989: GL; 4 Cyl 1.5L; "GAS, CARB, VIN J"

• 1989-1989: GLS; 4 Cyl 1.5L; "GAS, CARB, VIN J"

Fits 1 more submodels. (Show all) Show less info

DORMAN EXHAUST MANIFOLD KIT -- Includes 3 studs, 3 nuts, 3 washers, 1 manifold gasket, and heat shield; Cast iron construction; Engineered to perform better than the original OE design; Transports extremely hot exhaust gases with a temperature of up to 1400 degrees Fahrenheit from the cylinder head to the exhaust piping; Provides mounting for oxygen sensors, A.I.R. piping, and EGR piping; Seals the engine head and exhaust piping to prevent fumes and noise from escaping the engine compartment; Application-specific; Replacement for OE part number 2851123052; With Dorman's limited lifetime warranty.

Fits the following 1998 Hyundai Tiburon submodels:

• 1998-1998: Base; 4 Cyl 2.0L; "GAS, FI, G4CP, VIN F"
• 1998-1998: FX; 4 Cyl 2.0L; "GAS, FI, G4CP, VIN F"

Not for California

Fits the following 1999-2000 Hyundai Elantra submodels:

• 1999-2000: All Submodels; All Engines;

Not for California

Fits the following 1999-2002 Hyundai Accent submodels:

• 1999-2002: GL; 4 Cyl 1.5L;
• 1999-2002: GS; 4 Cyl 1.5L;

• 1999-2002: L; 4 Cyl 1.5L;

Fits 1 more submodels. (Show all) Show less info

DORMAN EXHAUST MANIFOLD KIT -- 49-state legal, not for sale or use in California; Combined manifold and converter assembly; Includes heat shield, two studs, two nuts, one manifold gasket, and one flange gasket; Cast iron construction; Engineered to perform better than the original OE design; Transports extremely hot exhaust gases with a temperature of up to 1400 degrees Fahrenheit from the cylinder head to the exhaust piping; Provides mounting for oxygen sensors, A.I.R. piping, and EGR piping; Seals the engine head and exhaust piping to prevent fumes and noise from escaping the engine compartment; Application-specific; Replacement for OE part number 28510-26650; With Dorman's limited lifetime warranty.

Fits the following 2000-2005 Hyundai Accent submodels:

• 2000-2001: GL; 4 Cyl 1.5L; "GAS, FI, VIN N"
• 2000-2001: GS; 4 Cyl 1.5L; "GAS, FI, VIN N"

• 2000-2001: L; 4 Cyl 1.5L; "GAS, FI, VIN N"

• 2001-2001: GL; 4 Cyl 1.6L; "GAS, FI, VIN N"

• 2001-2001: GS; 4 Cyl 1.6L; "GAS, FI, VIN N"

• 2002-2002: GS; 4 Cyl 1.6L; "GAS, FI, VIN C"

• 2002-2004: GL; 4 Cyl 1.6L; "GAS, FI, VIN C"

• 2004-2004: Base; 4 Cyl 1.6L; "GAS, FI, VIN C"

• 2004-2005: GT; 4 Cyl 1.6L; "GAS, FI, VIN C"

• 2005-2005: GLS; 4 Cyl 1.6L; "GAS, FI, VIN C"

Fits 8 more submodels. (Show all) Show less info

DORMAN EXHAUST MANIFOLD KIT -- Not for sale or use in California; Includes 4 studs, 4 nuts, 1 manifold gasket, and 1 flange gasket; Cast iron construction; Engineered to perform better than the original OE design; Transports extremely hot exhaust gases with a temperature of up to 1400 degrees Fahrenheit from the cylinder head to the exhaust piping; Provides mounting for oxygen sensors, A.I.R. piping, and EGR piping; Seals the engine head and exhaust piping to prevent fumes and noise from escaping the engine compartment; Application-specific; Replacement for OE part number 28510-22680; For single overhead camshaft; With Dorman's limited lifetime warranty.

Fits the following 2000-2002 Hyundai Accent submodels:

• 2000-2002: GL; 4 Cyl 1.5L; "GAS, FI, VIN N"
• 2000-2002: GS; 4 Cyl 1.5L; "GAS, FI, VIN N"

• 2000-2002: L; 4 Cyl 1.5L; "GAS, FI, VIN N"

• 2001-2001: GL; 4 Cyl 1.6L; "GAS, FI, VIN N"

• 2001-2001: GS; 4 Cyl 1.6L; "GAS, FI, VIN N"

Fits 3 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.5 in. inlet diameter, 8 in. length; Round shape; Single style; Angle-cut non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 2005-2007 Hyundai Tucson submodels:

• 2005-2005: LX; 6 Cyl 2.7L;
• 2005-2006: GL; 4 Cyl 2.0L;

• 2005-2006: GLS; 6 Cyl 2.7L;

• 2006-2007: Limited; 6 Cyl 2.7L;

• 2007-2007: GLS; 4 Cyl 2.0L;

• 2007-2007: SE; 6 Cyl 2.7L;

Fits 4 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.25 in. inlet diameter, 6 in. length; Round shape; Single style; Straight rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 2005-2007 Hyundai Tucson submodels:

• 2005-2005: LX; 6 Cyl 2.7L;
• 2005-2006: GL; 4 Cyl 2.0L;

• 2005-2006: GLS; 6 Cyl 2.7L;

• 2006-2007: Limited; 6 Cyl 2.7L;

• 2007-2007: GLS; 4 Cyl 2.0L;

• 2007-2007: SE; 6 Cyl 2.7L;

Fits 4 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3.5 in. outlet diameter, 2.5 in. inlet diameter, 6 in. length; Round shape; Single style; Straight rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 2005-2007 Hyundai Tucson submodels:

• 2005-2005: LX; 6 Cyl 2.7L;
• 2005-2006: GL; 4 Cyl 2.0L;

• 2005-2006: GLS; 6 Cyl 2.7L;

• 2006-2007: Limited; 6 Cyl 2.7L;

• 2007-2007: GLS; 4 Cyl 2.0L;

• 2007-2007: SE; 6 Cyl 2.7L;

Fits 4 more submodels. (Show all) Show less info

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3.5 in. outlet diameter, 2.5 in. inlet diameter, 8 in. length; Round shape; Single style; Angle-cut non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 2005-2007 Hyundai Tucson submodels:

• 2005-2005: LX; 6 Cyl 2.7L;
• 2005-2006: GL; 4 Cyl 2.0L;

• 2005-2006: GLS; 6 Cyl 2.7L;

• 2006-2007: Limited; 6 Cyl 2.7L;

• 2007-2007: GLS; 4 Cyl 2.0L;

• 2007-2007: SE; 6 Cyl 2.7L;

Fits 4 more submodels. (Show all) Show less info