Isuzu Exhaust

EXHAUST MANIFOLD -- A high quality, direct fit OE replacement exhaust manifold; Made of tough and durable material for strong resistance to harsh temperature condition, providing long-lasting life and service; Proven to last longer than the other exhaust manifold brands that easily wear off; Covered by a 1-year unlimited mileage warranty.

Fits the following 1991-1993 Isuzu Stylus submodels:

• 1991-1993: S; 4 Cyl 1.6L;

MAGNAFLOW CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- Complies with most state and federal laws; Designed and tested to meet legal sound level limits; Increases horsepower on an average range of 10 percent; 3 in. main piping diameter, 2.25 in. tailpipe diameter; Dual split rear exit; One front muffler with single inlet and dual outlet configuration; Two rear mufflers with single inlet and outlet configuration each; Includes installation hardware, 5 in. x 11 in. x 22 in. polished stainless steel mufflers, and dual 4 in. polished stainless steel tips with round shape, angle-cut, and non-rolled edge design; Made of 100 percent tough and durable stainless steel; Dyno tested and proven to provide performance gains in horsepower and torque; Delivers great sound with a smooth and deep tone; Built to last, all welded, and mandrel-bent; Easy installation; With Magnaflow's limited lifetime warranty.

Fits the following 2003-2008 Isuzu Ascender submodels:

• 2003-2003: Base; 6 Cyl 4.2L; "Gas, FI, Naturally Aspirated, VIN S"
• 2003-2004: Limited; 6 Cyl 4.2L; "Gas, FI, Naturally Aspirated, VIN S"

• 2003-2006: LS; 6 Cyl 4.2L; "Gas, FI, Naturally Aspirated, VIN S"

• 2004-2008: S; 6 Cyl 4.2L; "Gas, FI, Naturally Aspirated, VIN S"

Fits 2 more submodels. (Show all) Show less info

MAGNAFLOW STAINLESS STEEL CAT-BACK EXHAUST SYSTEM -- 2.5 in. Tubing O.D. Size, 3.5 in. Tip O.D. Size, Rear Side Exit Position, Single System, Includes 5 in. X 8 in. X 18 in. Muffler And Polished Stainless Steel Tip, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Fits the following 2007-2008 Isuzu i-370 submodels:

• 2007-2008: LS; 5 Cyl 3.7L; "Gas, FI, Naturally Aspirated, VIN E"

MAGNAFLOW STAINLESS STEEL CAT-BACK EXHAUST SYSTEM -- 2.5 In./2.25 in. Tubing O.D. Size, 3 in. Tip O.D. Size, Rear Exit Position, Dual System, Includes 5 in. X 8 in. X 18 in. Muffler And Dual Polished Stainless Steel Tips, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Fits the following 2007-2008 Isuzu i-370 submodels:

• 2007-2008: LS; 5 Cyl 3.7L; "Gas, FI, Naturally Aspirated, VIN E"

Fits the following 1991-1993 Isuzu Rodeo submodels:

• 1991-1992: XS; 4 Cyl 2.6L;
• 1991-1993: LS; 4 Cyl 2.6L;

• 1991-1993: S; 4 Cyl 2.6L;

Fits 1 more submodels. (Show all) Show less info

DORMAN EXHAUST MANIFOLD KIT -- Includes 3 studs, 3 nuts, 2 manifold gaskets, and 1 flange gasket; Cast iron construction; Engineered to perform better than the original OE design; Transports extremely hot exhaust gases with a temperature of up to 1400 degrees Fahrenheit from the cylinder head to the exhaust piping; Provides mounting for oxygen sensors, A.I.R. piping, and EGR piping; Seals the engine head and exhaust piping to prevent fumes and noise from escaping the engine compartment; Application-specific; Replacement for OE part number 97061518; With Dorman's limited lifetime warranty.

Fits the following 1991-1993 Isuzu Stylus submodels:

• 1991-1993: S; 4 Cyl 1.6L; "GAS, FI, VIN 6"

DORMAN EXHAUST MANIFOLD KIT -- Transports Extremely Hot Exhaust Gases With A Temperature Of Up To 1400 Degrees Fahrenheit From The Cylinder Head To The Exhaust Piping, Provides Mounting For Oxygen Sensors, A.I.R. Piping, And EGR Piping, Seals The Engine Head And Exhaust Piping To Prevent Fumes And Noise From Escaping The Engine Compartment, Application-Specific, Engineered To Perform Better Than The Original OE Design, Includes All The Necessary Hardware For A Complete Installation, Replacement For OE Part Number 94401273, With Dorman's Limited Lifetime Warranty

Fits the following 1987-1989 Isuzu I-Mark submodels:

• 1987-1987: Base; 4 Cyl 1.5L; "GAS, CARB, VIN 7"
• 1987-1989: S; 4 Cyl 1.5L; "GAS, CARB, VIN 7"

• 1988-1989: XS; 4 Cyl 1.5L; "GAS, CARB, VIN 7"

Fits 1 more submodels. (Show all) Show less info

DORMAN EXHAUST MANIFOLD KIT -- Includes 3 studs, 6 nuts, 1 manifold gasket, and 1 flange gasket; Cast construction; Engineered to perform better than the original OE design; Transports extremely hot exhaust gases with a temperature of up to 1400 degrees Fahrenheit from the cylinder head to the exhaust piping; Provides mounting for oxygen sensors, A.I.R. piping, and EGR piping; Seals the engine head and exhaust piping to prevent fumes and noise from escaping the engine compartment; Application-specific; Replacement for OE part number 8-94464-410-2; With Dorman's limited lifetime warranty.

Fits the following 1988 Isuzu Pickup submodels:

• 1988-1988: 1 Ton; 4 Cyl 2.6L; "GAS, FI, VIN E"
• 1988-1988: LS; 4 Cyl 2.6L; "GAS, FI, VIN E"

• 1988-1988: S; 4 Cyl 2.6L; "GAS, FI, VIN E"

Fits 1 more submodels. (Show all) Show less info

Fits the following 1996-1999 Isuzu Oasis submodels:

• 1996-1999: All Submodels; All Engines;

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.5 in. inlet diameter, 8 in. length; Round shape; Single style; Angle-cut non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 2007 Isuzu i-370 submodels:

• 2007-2007: LS; 5 Cyl 3.7L;

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.25 in. inlet diameter, 6 in. length; Round shape; Single style; Straight rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 2007 Isuzu i-370 submodels:

• 2007-2007: LS; 5 Cyl 3.7L;

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3.5 in. outlet diameter, 2.5 in. inlet diameter, 6 in. length; Round shape; Single style; Straight rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 2007 Isuzu i-370 submodels:

• 2007-2007: LS; 5 Cyl 3.7L;

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3.5 in. outlet diameter, 2.5 in. inlet diameter, 8 in. length; Round shape; Single style; Angle-cut non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 2007 Isuzu i-370 submodels:

• 2007-2007: LS; 5 Cyl 3.7L;

GIBSON EXHAUST TIP, STAINLESS STEEL, POLISHED -- 4 in. outlet diameter, 2.5 in. inlet diameter, 6 in. length; Round shape; Single style; Straight rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 2007 Isuzu i-370 submodels:

• 2007-2007: LS; 5 Cyl 3.7L;

GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED -- 3 in. outlet diameter, 2.5 in. inlet diameter, 12 in. length; Round shape; Single style; Angle-cut turndown, non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation; With Gibson's limited warranty.

Fits the following 2007 Isuzu i-370 submodels:

• 2007-2007: LS; 5 Cyl 3.7L;