Street Performance Valve Cover Spacer

There are a lot of ways to get more power out of your engine. Once you have done the easy stuff, like installing a high-flow exhaust, a cold air intake, and a chip, then you have to start looking at the internals of the engine to try to wring every last bit of power out. You can go a long way by working on the head. You can install high ratio rocker arms, stud girdles, or performance ply locks. While these components can do a lot for you, when you try to get the valve cover back on, you may run into some difficulties. Many of these performance parts are considerably larger than your stock parts, and the last thing you need are your rocker arms smacking against the valve cover. That is why you will need a Street Performance Valve Cover Spacer. Machined out of T-6061 billet aluminum, the Street Performance Valve Cover Spacer is just the part to accommodate your upgraded head components. It is very easy to install if you already have your valve cover removed. Anyone can install this spacer in a very short period of time, and it comes with all of the gaskets and other mounting hardware than you will require. Proper torquing of any fasteners is important, but it is especially important to properly torque your valve cover, as a bad seal could lead to a vacuum leak, or worse, damage to the head. Be certain to look up the proper torque settings when you install your Street Performance Valve Cover Spacer. All our customers want superb technical assistance while shopping for reliable auto parts for their car or truck. That's why we created a 24/7 customer assistance bureau to answer all your calls. Everyone hates paying for shipping, so we always provide 100% free shipping on every order greater than $50. If you spot a lower price elsewhere, call us - we always beat any price advertised elsewhere.