Oldsmobile Toronado Accessory Belt Idler Pulley

DAYCO NO SLACK ACCESSORY BELT IDLER/TENSION PULLEY -- 90 mm OD, 17 mm ID, 30 mm W, flat steel without flange; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance.

Fits the following 1986-1988 Oldsmobile Toronado submodels:

• 1988-1988: Trofeo; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN C"
• 1987-1987: Brougham; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN 3"

• 1987-1987: Trofeo; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN 3"

• 1986-1986: Brougham; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN B"

Fits 2 more submodels. (Show all) Show less info

GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 82mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures

Fits the following 1988-1992 Oldsmobile Toronado submodels:

• 1988-1992: Base; 6 Cyl 3.8L; "GAS"
• 1988-1992: Trofeo; 6 Cyl 3.8L; "GAS"

AC DELCO BELT IDLER PULLEY, THERMOPLASTIC -- 82 x 17 x 25 mm, smooth/backside pulley type; A high quality, OE replacement belt idler pulley; Replaces OE number 88928231; With 12-month or 12,000-mile AC Delco warranty.

Fits the following 1988-1992 Oldsmobile Toronado submodels:

• 1991-1992: Base; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"
• 1991-1992: Trofeo; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"

• 1988-1990: Base; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN C"

• 1988-1990: Trofeo; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN C"

Fits 2 more submodels. (Show all) Show less info

DORMAN IDLER PULLEY, STEEL -- 1.18 in. width, 3.25 in. OD; Flat type; A high quality, direct fit OE replacement idler pulley; With lifetime Dorman limited warranty.

Fits the following 1991-1992 Oldsmobile Toronado submodels:

• 1991-1992: Base; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"
• 1991-1992: Trofeo; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"

HAYDEN IDLER/TENSIONER PULLEY, PLASTIC -- 1 in. belt W, 3.75 in. pulley diameter, 3.25 in. OD, 0.67 in. ID, serpentine belt type, flat groove, back idler pulley type; Manufactured using the highest quality standards; Meets or exceeds OE specifications; Assists in belt routing and tensioning within the accessory drive system.

Fits the following 1988-1992 Oldsmobile Toronado submodels:

• 1988-1992: All Submodels; All Engines;