Chevy Beretta Accessory Belt Tensioner

AUTOMATIC BELT TENSIONER -- Flat; Serpentine type; A high quality, OE replacement automatic belt tensioner; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1987-1996 Chevrolet Beretta submodels:

• 1994-1996: Base; 6 Cyl 3.1L; "GAS, FI, VIN M"
• 1994-1996: Z26; 6 Cyl 3.1L; "GAS, FI, VIN M"

• 1991-1993: GTZ; 6 Cyl 3.1L; "GAS, FI, VIN T"

• 1990-1993: Base; 6 Cyl 3.1L; "GAS, FI, VIN T"

• 1990-1993: GT; 6 Cyl 3.1L; "GAS, FI, VIN T"

• 1990-1990: Indianapolis 500 Pace Car; 6 Cyl 3.1L; "GAS, FI, VIN T"

• 1987-1989: Base; 6 Cyl 2.8L; "GAS, FI, VIN W"

• 1987-1989: GT; 6 Cyl 2.8L; "GAS, FI, VIN W"

Fits 6 more submodels. (Show all) Show less info

DAYCO NO SLACK AUTOMATIC BELT TENSIONER -- Designed to maintain constant tension on serpentine belt drives; Features a patented flat spring design that provides less operating range variations in tension, reduces the risk of premature accessory bearing failure, and lessens the risk of belt squeal and slippage or poor accessory performance; Designed with a Teflon strip wound within the spring to resist abrasion; A heavy-duty cast aluminum arm offers additional strength and less distortion, an aluminum retainer ring locks the spring case and arm together and seals against corrosion, a thermoplastic rubber spring slot plug keeps out harmful contaminants, and a rubber O-ring seals against dust and grime; The lubricated nylon pivot tube bushing and spring bushing promote quieter performance, while the zinc coated mounting bolt resists rust and is concentric for a more even degree of constant tension.

Fits the following 1987-1996 Chevrolet Beretta submodels:

• 1994-1996: Base; 6 Cyl 3.1L; "GAS, FI, Naturally Aspirated, VIN M"
• 1994-1996: Z26; 6 Cyl 3.1L; "GAS, FI, Naturally Aspirated, VIN M"

• 1991-1993: GTZ; 6 Cyl 3.1L; "GAS, FI, Naturally Aspirated, VIN T"

• 1990-1993: Base; 6 Cyl 3.1L; "GAS, FI, Naturally Aspirated, VIN T"

• 1990-1993: GT; 6 Cyl 3.1L; "GAS, FI, Naturally Aspirated, VIN T"

• 1990-1990: Indianapolis 500 Pace Car; 6 Cyl 3.1L; "GAS, FI, Naturally Aspirated, VIN T"

• 1987-1989: Base; 6 Cyl 2.8L; "GAS, FI, Naturally Aspirated, VIN W"

• 1987-1989: GT; 6 Cyl 2.8L; "GAS, FI, Naturally Aspirated, VIN W"

Fits 6 more submodels. (Show all) Show less info

GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 90 mm outside diameter, 25.5 mm width, 6-rib V-ribbed belt type; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.

Fits the following 1987-1996 Chevrolet Beretta submodels:

• 1994-1996: Z26; 6 Cyl 3.1L; "GAS"
• 1990-1996: Base; 6 Cyl 3.1L; "GAS"

• 1991-1993: GTZ; 6 Cyl 3.1L; "GAS"

• 1990-1993: GT; 6 Cyl 3.1L; "GAS"

• 1990-1990: Indianapolis 500 Pace Car; 6 Cyl 3.1L; "GAS"

• 1987-1989: Base; 6 Cyl 2.8L; "GAS"

• 1987-1989: GT; 6 Cyl 2.8L; "GAS"

Fits 5 more submodels. (Show all) Show less info

DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.

Fits the following 1990-1994 Chevrolet Beretta submodels:

• 1994-1994: Z26; 4 Cyl 2.3L; "GAS, FI, Naturally Aspirated, VIN A"
• 1990-1993: GTZ; 4 Cyl 2.3L; "GAS, FI, Naturally Aspirated, VIN A"

• 1990-1990: Indianapolis 500 Pace Car; 4 Cyl 2.3L; "GAS, FI, Naturally Aspirated, VIN A"

Fits 1 more submodels. (Show all) Show less info

AC DELCO DRIVE BELT TENSIONER ASSEMBLY, SOLD INDIVIDUALLY -- A high quality, OE replacement drive belt tensioner assembly; Replaces OE number 88909600; With 12-month or 12,000-mile AC Delco warranty.

Fits the following 1992-1996 Chevrolet Beretta submodels:

• 1992-1996: Base; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated, VIN 4"
• 1992-1993: GT; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated, VIN 4"

HAYDEN AUTOMATIC BELT TENSIONER, SOLD INDIVIDUALLY -- Smooth pulley type; OE quality for long life and easy replacement; Maintains constant tension on the belt to extend both belt and accessory drive bearing life.

Fits the following 1987-1996 Chevrolet Beretta submodels:

• 1994-1996: Z26; 6 Cyl 3.1L;
• 1990-1996: Base; 6 Cyl 3.1L;

• 1991-1993: GTZ; 6 Cyl 3.1L;

• 1990-1993: GT; 6 Cyl 3.1L;

• 1990-1990: Indianapolis 500 Pace Car; 6 Cyl 3.1L;

• 1987-1989: Base; 6 Cyl 2.8L;

• 1987-1989: GT; 6 Cyl 2.8L;

Fits 5 more submodels. (Show all) Show less info