Mitsubishi Bed Rails

DEE ZEE HEAVYWEIGHT TRUCK BED MAT, RUBBER, BLACK

Worried about your cargos shifting and damaging your truck bed? Dee Zee bed mats' patented Nyracord compound provides excellent traction to prevent those unwanted bumps and dings.

Features:

• 59.5 x 64 in.
• Made of high strength Nyracord, a 3/8 in. thick cord-enhanced rubber compound
• Designed with rubber cleats to keep mat in place and prevent cargo from shifting and damaging the truck
• Resists most chemical spills and will not crack or break under extreme temperatures

Fits the following 2006-2009 Mitsubishi Raider submodels:

• 2006-2009: LS; All Engines;
• 2007-2007: SE; All Engines;

• 2006-2007: DuroCross; All Engines;

• 2006-2006: XLS; All Engines;

Fits 2 more submodels. (Show all) Show less info

BEDRUG TRUCK BED MAT, POLYPROPYLENE, CHARCOAL

The ultimate combination of heavy duty truck bed protection and luxurious look and feel. These bed mats provide a soft surface to pamper your cargo, yet they also stand up to the harshest abuse to keep your truck bed floor safe.

Features:

• 0.5 in. thick
• Made of 100 percent polypropylene
• Ultra tough, slip and skid resistant fiber surface that looks and feels like carpet
• Cushioned for superior comfort
• Bleach, battery, acid, oil, gas, and water resistant
• Designed for exterior use
• Installs over existing plastic drop in bed liner
• Easy installation using threaded plastic studs

Fits the following 2006-2009 Mitsubishi Raider submodels:

• 2006-2009: LS; All Engines;
• 2006-2006: DuroCross; All Engines;

AEM HIGH VOLUME FUEL RAIL, ALUMINUM, ANODIZED BLACK -- 50-state legal; Includes comprehensive installation instructions, hardware, fittings, and injector O-rings; With additional 0.13 npt port to accommodate a nitrous set-up or fuel pressure gauge and a 0.5 in. fuel bore to support fuel flow for applications up to 1,000 h.p.; This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes; Has a custom fuel line fitting for the factory fuel line; Its rail ends are pre-tapped to accept negative 6 AN or 0.56 in. x 18 in. fittings for custom fuel lines; Has OE fuel pressure regulator or AEM adjustable fuel pressure regulator that is mounted directly to rail with no modifications needed; Additional parts not required for installation.

Fits the following 1990-1998 Mitsubishi Eclipse submodels:

• 1996-1998: Spyder GST; 4 Cyl 2.0L; "4G63, Turbocharged, VIN F"
• 1995-1998: GST; 4 Cyl 2.0L; "4G63, Turbocharged, VIN F"

• 1995-1998: GSX; 4 Cyl 2.0L; "4G63, Turbocharged, VIN F"

• 1993-1994: GS; 4 Cyl 2.0L; "Turbocharged, VIN F"

• 1993-1994: GST; 4 Cyl 2.0L; "Turbocharged, VIN F"

• 1993-1994: GSX; 4 Cyl 2.0L; "Turbocharged, VIN F"

• 1990-1992: GS; 4 Cyl 2.0L; "Turbocharged, VIN U"

• 1990-1992: GST; 4 Cyl 2.0L; "Turbocharged, VIN U"

• 1990-1992: GSX; 4 Cyl 2.0L; "Turbocharged, VIN U"

Fits 7 more submodels. (Show all) Show less info

GO RHINO BED BAR, STEEL, POWDERCOATED BLACK -- Rear main B vertical upright bar; 3 in. diameter steel tubing; Includes hard plastic gaskets to eliminate any metal to metal contact; Features a complete bolt together design with no exposed metals; Requires application specific bed bar components to complete the whole bed bar for your vehicle; For cosmetic and mounting lights applications only; Not to be used as a roll bar; Easy no-drill installation and removal; Recommends use of light bar kicker.

Fits the following 1983-1996 Mitsubishi Mighty Max submodels:

• 1983-1996: Base; All Engines;
• 1987-1992: 1 Ton; All Engines;

• 1986-1989: Sport; All Engines;

• 1983-1989: SPX; All Engines;

• 1983-1985: SP; All Engines;

• 1983-1984: S; All Engines;

Fits 4 more submodels. (Show all) Show less info

HAULER RACKS HAULER II TRUCK RACK, ALUMINUM, ANODIZED BRIGHT -- 1,000 lbs. rack capacity; Made of anodized and bright dipped aluminum; Features durable support braces for optimum structural integrity and distinct design which allows for reduction in part numbers; Lightweight and rustproof; Designed with three cross bars for highest strength and durability.

Fits the following 2006-2009 Mitsubishi Raider submodels:

• 2006-2009: All Submodels; All Engines;

Fits the following 1990-2012 Mitsubishi Eclipse submodels:

• 2012-2012: Spyder GS Sport; 4 Cyl 2.4L;
• 2012-2012: Spyder SE; 4 Cyl 2.4L;

• 2010-2012: GS Sport; 4 Cyl 2.4L;

• 2008-2012: SE; 4 Cyl 2.4L;

• 2007-2012: Spyder GT; 6 Cyl 3.8L;

• 2006-2012: GT; 6 Cyl 3.8L;

• 2000-2012: GS; 4 Cyl 2.4L;

• 2008-2011: GT-P; 6 Cyl 3.8L;

• 2008-2011: Spyder GT-P; 6 Cyl 3.8L;

• 2001-2011: Spyder GS; 4 Cyl 2.4L;

• 2008-2008: SE; 6 Cyl 3.8L;

• 2003-2005: GTS; 6 Cyl 3.0L;

• 2003-2005: Spyder GTS; 6 Cyl 3.0L;

• 2001-2005: Spyder GT; 6 Cyl 3.0L;

• 2000-2005: GT; 6 Cyl 3.0L;

• 2000-2004: RS; 4 Cyl 2.4L;

• 1996-1999: GS; 4 Cyl 2.0L; "Turbocharged"

• 1996-1999: GST; 4 Cyl 2.0L; "Turbocharged"

• 1996-1999: GSX; 4 Cyl 2.0L; "Turbocharged"

• 1996-1999: RS; 4 Cyl 2.0L; "Turbocharged"

• 1996-1999: Spyder GS; 4 Cyl 2.4L; "Naturally Aspirated"

• 1996-1999: Spyder GST; 4 Cyl 2.0L; "Turbocharged"

• 1996-1997: Base; 4 Cyl 2.0L; "Turbocharged"

• 1995-1995: All Submodels; All Engines;

• 1990-1994: Base; 4 Cyl 1.8L;

• 1990-1994: GS; 4 Cyl 1.8L;

• 1990-1994: GS; 4 Cyl 2.0L;

• 1990-1994: GST; 4 Cyl 2.0L;

• 1990-1994: GSX; 4 Cyl 2.0L;

Fits 27 more submodels. (Show all) Show less info

LUND MULTI-FIT STEPRAILS ELLIPTICAL STEPS, ALUMINUM, BRITE, SET OF 2 -- 80 in. length; Made of durable aluminum; Features heavy duty rugged tubular appearance and thick, non-slip step treads; Will not rust or corrode; No painting required for installation; Running board mount kit required.

Fits the following 2006-2009 Mitsubishi Raider submodels:

• 2006-2009: LS; All Engines;
• 2007-2007: SE; All Engines;

• 2006-2007: DuroCross; All Engines;

• 2006-2006: XLS; All Engines;

Fits 2 more submodels. (Show all) Show less info