Mitsubishi Cordia Brake Booster

CENTRIC C-TEK BRAKE DISC, STANDARD, VENTED, SOLD INDIVIDUALLY -- 4 x 104 mm PCD bolt pattern; 243 mm outer diameter; 13 mm nominal thickness; 11.4 mm minimum thickness; This is a high quality OE replacement brake disc.

Fits the following 1983-1983 Mitsubishi Cordia submodels:

• 1983-1983: All Submodels; All Engines;

AKEBONO PRO-ACT ULTRA-PREMIUM BRAKE PADS, CERAMIC, 2-WHEEL SET

Make your brakes feel like brand new with Akebono Pro-ACT Ultra-Premium Brake Pads, the ultimate upgrade for OE semi-metallic and organic brake pads. As the aftermarket's only OE-validated pads, Pro-ACT offers high-caliber braking performance, produces minimal dust so as to keep wheels clean, and exhibits incredible pad wear resistance so that you don't have to visit the repair shop for replacements for a long time. Moreover, they boast of a harmonically damped design and have chamfers, slots, and precision-fit steel backing plates to maximize control over noise, vibration, and harshness (NVH). On top of all these, front Pro-ACT Pads are post-cured and heat-scorched to maximize initial braking effectiveness - no break-in required!

Features:

• Asbestos-free
• Low-dust and long-wearing vehicle-optimized formulation
• Harmonically damped, chamfered, slotted, and shimmed for NVH control
• Causes only minimal rotor wear to prolong rotor life
• Backing plates are powdercoated black for corrosion resistance
• Includes high-temperature resistant moly lube

Fits the following 1984-1988 Mitsubishi Cordia submodels:

• 1984-1988: All Submodels; All Engines;

BENDIX CQ BRAKE PADS, CERAMIC, 2-WHEEL SET

Bendix CQ Brake Pads are designed to meet OE specifications while utilizing non-asbestos organic (NAO) ceramic technology. Formulated to generate less performance-inhibiting brake dust, these pads provide smooth braking and greater stopping power. Additionally, most CQ Pads feature shims, chamfers, and slots to mirror or improve upon OE noise insulation design.

Features:

• Asbestos-free
• Low dust formulation
• Integrally molded
• Non-chamfered
• Slotted

This brake pad set comes with shims and pad lubricant.

Fits the following 1984-1988 Mitsubishi Cordia submodels:

• 1984-1988: L; 4 Cyl 2.0L;
• 1984-1984: Base; 4 Cyl 2.0L;

• 1984-1984: LS; 4 Cyl 2.0L;

Fits 1 more submodels. (Show all) Show less info

A1 CARDONE FRICTION CHOICE SEMI-LOADED BRAKE CALIPER, REMANUFACTURED, SOLD INDIVIDUALLY -- Includes mounting hardware for quick and easy installation; Does not include brake pads and bracket; Features OE quality seals, boots, and bleeder screws; 100 percent pressure tested for guaranteed performance; Undergone stringent quality control; Meets or exceeds OE specifications.

Fits the following 1986-1988 Mitsubishi Cordia submodels:

• 1986-1988: Turbo; All Engines;

KLEEN WHEELS BRAKE DUST SHIELDS, TURBO VENTED, MATTE BLACK, SET OF 2 -- Certified and approved by TUV in Germany; One-piece construction using aircraft grade aluminum; Fits securely between the hub and the wheel; Protects the wheels from brake dust for a constant shine; Will not affect new car warranty; Easy installation.

Fits the following 1983-1984 Mitsubishi Cordia submodels:

• 1983-1984: All Submodels; All Engines;

PRONTO BRAKE DISC, SOLID, SOLD INDIVIDUALLY

Repair your brake system with Pronto OE replacement brake discs. These are manufactured by ISO certified factories to meet OE fit, form, and function and ensure smooth and vibration-free braking. They are engineered to high metallurgical standards for consistent strength, quality, and performance. The discs are given a non-directional swirl finish to eliminate the need for machining prior to installation; and they feature precise hub hole chamfers to ensure a hub centric fit. All in all, you are assured of complete repair when you use Pronto OE replacements.

Specifications:

• 4 x 104 mm bolt pattern
• 243 mm disc diameter
• ISO certified

Features:

• Precision balanced to guarantee smooth vibration-free performance and reduce brake noise
• Non-directional swirl finish does away with machining prior to installation
• Precise hub hole chamfers ensure hub centric fit

Fits the following 1983-1983 Mitsubishi Cordia submodels:

• 1983-1983: All Submodels; All Engines;

BECK ARNLEY PREMIUM BRAKE PADS, ORGANIC, 2-WHEEL SET

Restore the performance of your braking system with Beck Arnley Premium Brake Pads. These long lasting brake pads are made to be of exact fit and ready to install right out of the box. More than this, these pads are post-cured so that you don't need to have them broken in any more.

Features:

• Chamfered and/or slotted depending on OE design
• Formulated from rotor-friendly non-asbestos organic (NAO) friction materials
• Post-cured so there is no break-in required
• Pad assemblies are integrally molded and feature smooth-edged backing plates
• Precision-fit construction virtually eliminates noise and reduces dust output
• With chemically and mechanically bonded shims

Fits the following 1984-1988 Mitsubishi Cordia submodels:

• 1984-1988: All Submodels; All Engines;

BOSCH QUIETCAST PREMIUM BRAKE PADS, 2-WHEEL SET

Replace worn-down OE brake pads with Bosch QuietCast Premium Brake Pads. These have the same material type as your original pads, but boast of advanced platform-specific formulation to ensure top braking performance. They are also sculpted to match the chamfers and slots of the OE design, if any. Additionally, these feature rubber-core shims that are heat and pressure cured between two layers of steel to ensure excellent rubber-to-metal bonding that results in noise reduction, increased strength, and corrosion resistance. With Bosch QuietCast, you are assured of reliable braking performance that is pleasantly noise-free.

Features:

• Integrally molded Unimold design
• Laminated OE-style rubber-core shims
• Same-as-OE brake pad material type
• Advanced platform-specific pad material formulation
• Powdercoated backing plate
• Synthetic lubricant included

Fits the following 1984-1988 Mitsubishi Cordia submodels:

• 1984-1988: All Submodels; All Engines;

STANDARD STOPLIGHT SWITCH

Standard Brake Light switches are constructed using brass or high-impact composite housings as specified for optimum performance and durability. It has copper alloy conductors for guaranteed superior electrical conductivity with low resistive losses.

Standard Engine Management is a leading producer and distributor of a complete line of engine management related products which include ignition and emission parts, on-board computers, ignition wires, battery cables, and fuel system parts. Their products are output of intensive research and development to guarantee that it will meet technician's needs.

Features:

• Meets or exceeds OE specifications
• Specially designed spring and contact arrangement reduces arcing for long service life
• 100% tested to check both mechanical and electrical switching performance
• Designed for strength using high-quality materials to match the needs of service professionals
• Intermotor Stoplight Switch
• Female Connector
• 1 Electrical Connector
• 2 Male Blade-Type Terminals

Fit Note:	To 2/85
Type:	OE replacement
Quantity Sold:	Sold individually
Warranty:	3-year or 36,000-mile Standard limited warranty

Fits the following 1983-1985 Mitsubishi Cordia submodels:

• 1985-1985: Turbo; 4 Cyl 1.8L;
• 1984-1984: Base; 4 Cyl 2.0L;
• 1984-1984: L; 4 Cyl 2.0L;
• 1984-1984: LS; 4 Cyl 2.0L;
• 1983-1983: All Submodels; All Engines;

Fits 3 more submodels. (Show all) Show less info

BREMBO S.p.A.
Brembo, headquartered in Italy, is a world leader and design innovator of high-performance braking systems. Brembo supplies brake systems to the most prestigious brands of passenger cars and motorcycles worldwide.

Fits the following 1984-1988 Mitsubishi Cordia submodels:

• 1984-1988: All Submodels; All Engines;

AC DELCO BRAKE CALIPER BOLT, SOLD INDIVIDUALLY -- Includes sleeve; This is a high quality, OE replacement brake caliper bolt.

Fits the following 1984-1988 Mitsubishi Cordia submodels:

• 1984-1988: L; 4 Cyl 2.0L; "GAS, CARB, Naturally Aspirated, VIN D"
• 1984-1988: Turbo; 4 Cyl 1.8L; "GAS, FI, Turbocharged, VIN G"

• 1984-1984: Base; 4 Cyl 2.0L; "GAS, CARB, Naturally Aspirated, VIN D"

• 1984-1984: LS; 4 Cyl 2.0L; "GAS, CARB, Naturally Aspirated, VIN D"

Fits 2 more submodels. (Show all) Show less info

FAE
FAE manufactures OE electrical parts for motor vehicles and offers a wide production range of sensors, switches, temperature and pressure transmitters, oxygen sensors, timing sensors, glow plugs (termoplus), solenoids, ignition leads and thermostats.

Fits the following 1983-1988 Mitsubishi Cordia submodels:

• 1984-1988: L; 4 Cyl 2.0L;
• 1983-1986: All Submodels; All Engines;

• 1984-1984: Base; 4 Cyl 2.0L;

• 1984-1984: LS; 4 Cyl 2.0L;

Fits 2 more submodels. (Show all) Show less info

Forecast Trading
Forecast Trading offers high quality replacement parts that are manufactured by quality-certified factories, and engineered to the most current Original Equipment specifications.

Fits the following 1985-1988 Mitsubishi Cordia submodels:

• 1985-1988: L; 4 Cyl 2.0L;
• 1985-1988: Turbo; 4 Cyl 1.8L;

DORMAN HELP! BRAKE BLEEDER SCREW -- M10-1.0 x 33 mm; Carded packaging; A high quality, OE replacement brake bleeder screw.

Fits the following 1983-1988 Mitsubishi Cordia submodels:

• 1984-1988: L; 4 Cyl 2.0L; "GAS, CARB, Naturally Aspirated, VIN D"
• 1984-1988: Turbo; 4 Cyl 1.8L; "GAS, FI, Turbocharged, VIN G"

• 1984-1984: Base; 4 Cyl 2.0L; "GAS, CARB, Naturally Aspirated, VIN D"

• 1984-1984: LS; 4 Cyl 2.0L; "GAS, CARB, Naturally Aspirated, VIN D"

• 1983-1983: Base; 4 Cyl 1.8L; "GAS, CARB, Naturally Aspirated, VIN 4"

• 1983-1983: L; 4 Cyl 1.8L; "GAS, CARB, Naturally Aspirated, VIN 4"

• 1983-1983: LS; 4 Cyl 1.8L; "GAS, CARB, Naturally Aspirated, VIN 4"

Fits 5 more submodels. (Show all) Show less info

Fits the following 1984-1988 Mitsubishi Cordia submodels:

• 1985-1988: L; 4 Cyl 2.0L;
• 1985-1986: Turbo; 4 Cyl 1.8L;

• 1984-1984: All Submodels; All Engines;

Fits 1 more submodels. (Show all) Show less info