American Motors Matador Brake Disc

EBC GREENSTUFF 2000 SERIES BRAKE PADS, ORGANIC, 2-WHEEL SET

Designed especially for sport compacts, muscle cars, and premium American- and European-built sedans, the EBC Greenstuff 2000 line of brake pads is the perfect choice for high performance braking during spirited street driving. Made with organic man-made aramid fibers such as DuPont Kevlar or Twaron, Greenstuff 2000 boasts of a nominal friction coefficient of 0.55. Additionally, each pad has its surface finished with EBC Brake-In coating to guarantee you a high initial brake effect. With Greenstuff 2000, you are free to cruise leisurely along highways without worry.

Features:

• Emits less dust than equivalent semi-metallic pads
• Proven in tests to stop a vehicle 20 feet sooner than stock pads
• Reduces heat fade and rotor wear
• Fully shimmed, chamfered, and slotted for silent braking
• Features EBC Brake-In surface coating to accelerate pad bed in after installation
• Greenstuff pads are for spirited street driving

Install these brake pads with the help of EBC's instructional video P/N E35DVD083 (sold separately).

Fits the following 1971-1974 American Motors Matador submodels:

• 1974-1974: Brougham; 6 Cyl 3.8L;
• 1974-1974: Brougham; 6 Cyl 4.2L;

• 1974-1974: Brougham; 8 Cyl 5.0L;

• 1974-1974: Brougham; 8 Cyl 5.9L;

• 1974-1974: Brougham; 8 Cyl 6.6L;

• 1974-1974: X; 8 Cyl 5.0L;

• 1974-1974: X; 8 Cyl 5.9L;

• 1974-1974: X; 8 Cyl 6.6L;

• 1971-1974: Base; 6 Cyl 3.8L;

• 1971-1974: Base; 6 Cyl 4.2L;

• 1971-1974: Base; 8 Cyl 5.0L;

• 1971-1974: Base; 8 Cyl 5.9L;

• 1971-1974: Base; 8 Cyl 6.6L;

Fits 11 more submodels. (Show all) Show less info

CENTRIC POSI QUIET SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Semi-Metallic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos and copper free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

Fits the following 1974-1978 American Motors Matador submodels:

• 1974-1978: All Submodels; All Engines;
• 1974-1974: Base; All Engines;

• 1974-1974: Brougham; All Engines;

• 1974-1974: X; All Engines;

Fits 2 more submodels. (Show all) Show less info

HAWK PERFORMANCE HPS BRAKE PADS, SEMI-METTALIC, 2-WHEEL SET

Increase the braking power of your street legal performance vehicle by 20-40 percent with Hawk High Performance Street (HPS) Brake Pads! The unique ferro-carbon compound of these pads has a higher coefficient of friction over OE pads and has a higher resistance to fade over standard aftermarket replacements - giving you increased stopping power, reduced dust production, and longer pad and rotor life.

Features:

• Asbestos-free
• Low-dust and long-wear ferro-carbon compound
• Higher coefficient of friction over stock brake pads
• Higher resistance to brake fade than standard replacements
• High friction/torque hot or cold
• Virtually noise free
• Prolonged rotor life

Item Specifications:

• 0.6 in. thickness

Fits the following 1971-1974 American Motors Matador submodels:

• 1971-1974: All Submodels; All Engines;

BENDIX CQ BRAKE PADS, CERAMIC, 2-WHEEL SET

Bendix CQ Brake Pads are designed to meet OE specifications while utilizing non-asbestos organic (NAO) ceramic technology. Formulated to generate less performance-inhibiting brake dust, these pads provide smooth braking and greater stopping power. Additionally, most CQ Pads feature shims, chamfers, and slots to mirror or improve upon OE noise insulation design.

Features:

• Asbestos-free
• Low dust formulation

Fits the following 1971-1974 American Motors Matador submodels:

• 1974-1974: Brougham; 6 Cyl 3.8L;
• 1974-1974: Brougham; 6 Cyl 4.2L;

• 1974-1974: Brougham; 8 Cyl 5.0L;

• 1974-1974: Brougham; 8 Cyl 5.9L;

• 1974-1974: Brougham; 8 Cyl 6.6L;

• 1974-1974: X; 8 Cyl 5.0L;

• 1974-1974: X; 8 Cyl 5.9L;

• 1974-1974: X; 8 Cyl 6.6L;

• 1971-1974: Base; 6 Cyl 3.8L;

• 1971-1974: Base; 6 Cyl 4.2L;

• 1971-1974: Base; 8 Cyl 5.0L;

• 1971-1974: Base; 8 Cyl 5.9L;

• 1971-1974: Base; 8 Cyl 6.6L;

Fits 11 more submodels. (Show all) Show less info

A1 CARDONE FRICTION CHOICE SEMI-LOADED BRAKE CALIPER, REMANUFACTURED, SOLD INDIVIDUALLY -- Includes mounting hardware for quick and easy installation; Does not include brake pads and bracket; Features OE quality seals, boots, and bleeder screws; 100 percent pressure tested for guaranteed performance; Undergone stringent quality control; Meets or exceeds OE specifications.

Fits the following 1971-1975 American Motors Matador submodels:

• 1971-1975: All Submodels; All Engines;

BRAKE DRUM, SOLD INDIVIDUALLY -- A high quality, direct fit OE replacement brake drum.

Fits the following 1971-1976 American Motors Matador submodels:

• 1975-1976: Base; All Engines;
• 1971-1973: All Submodels; All Engines;

SACHS CLUTCH DISC, STANDARD -- 11 in. OD, 1.125 in. ID, 10T teeth; A high quality clutch disc; With 1-year Sach limited warranty.

Fits the following 1971-1974 American Motors Matador submodels:

• 1974-1974: Brougham; 8 Cyl 5.9L;
• 1974-1974: Brougham; 8 Cyl 6.6L;

• 1974-1974: X; 8 Cyl 5.9L;

• 1974-1974: X; 8 Cyl 6.6L;

• 1971-1974: Base; 8 Cyl 5.9L;

• 1971-1974: Base; 8 Cyl 6.6L;

Fits 4 more submodels. (Show all) Show less info

STANDARD STOPLIGHT SWITCH

Standard Brake Light switches are constructed using brass or high-impact composite housings as specified for optimum performance and durability. It has copper alloy conductors for guaranteed superior electrical conductivity with low resistive losses.

Standard Engine Management is a leading producer and distributor of a complete line of engine management related products which include ignition and emission parts, on-board computers, ignition wires, battery cables, and fuel system parts. Their products are output of intensive research and development to guarantee that it will meet technician's needs.

Features:

• Meets or exceeds OE specifications
• Specially designed spring and contact arrangement reduces arcing for long service life
• 100% tested to check both mechanical and electrical switching performance
• Designed for strength using high-quality materials to match the needs of service professionals
• No Connector
• 1 Electrical Connector
• 2 Male Blade-Type Terminals
• 1/2 in. - 18 Thread Size

Fit Note:	Without Speed Control
Type:	OE replacement
Quantity Sold:	Sold individually
Warranty:	3-year or 36,000-mile Standard limited warranty

Fits the following 1971-1971 American Motors Matador submodels:

• 1971-1971: All Submodels; All Engines;

AC DELCO DURASTOP BRAKE MASTER CYLINDER, NEW -- Includes cap and reservoir; This high quality brake master cylinder directly replaces OE number 19176488.

Fits the following 1976-1978 American Motors Matador submodels:

• 1976-1978: Base; All Engines;

DORMAN FIRST STOP BRAKE MASTER CYLINDER, NEW

Give your ride better quality replacement parts by simply getting them from Dorman line of high-quality parts. One of Dorman's flagships of OE replacement part is the First Stop Brake Master Cylinder. This brake component is specially designed to have the same fitment characteristics as with the original part in your vehicle. This is made from durable materials to ensure that it will last longer.

Item Details:

• Includes reservoir and cap
• 1-1/8 in. bore size
• 9/16 in.-18 rearward port
• 1/2 in.-20 forward port

Fits the following 1975-1978 American Motors Matador submodels:

• 1975-1978: Base; 6 Cyl 4.2L; "GAS, CARB, Naturally Aspirated, VIN A"
• 1975-1978: Base; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN N"

• 1975-1977: Base; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1975-1976: Base; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN P"

• 1975-1976: Base; 8 Cyl 6.6L; "GAS, CARB, Naturally Aspirated, VIN Z"

Fits 3 more submodels. (Show all) Show less info

HAYS STREET/STRIP CLUTCH DISC, ORGANIC -- 10.5 in. diameter, 10-spline by 1.125 in., borg and beck type, diaphragm pressure plate style; Engineered specifically for high horsepower street vehicles and occasional dragstrip use, manufactured with premium quality and high burst strength woven lining to withstand heat and higher engine rpm; Riveted to a Marcel backing and heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter; With 90-day Hays limited warranty.

Fits the following 1971-1972 American Motors Matador submodels:

• 1971-1972: Base; 8 Cyl 5.9L;
• 1971-1972: Base; 8 Cyl 6.6L;

AUTOCOM PREMIUM CLUTCH KIT

AutoCom Clutch Kit components are supplied by the most high quality manufacturers around the world that guarantees best performance.

Specifications:

• 11 in. disc OD
• 1.13 in. spline ID
• 10 teeth
• Lever pressure plate style

Features:

• Provides increased clamp load
• Manufactured to meet or exceed original specifications giving reliable parts with a direct fit for easy installation

Fits the following 1971-1974 American Motors Matador submodels:

• 1974-1974: Brougham; 8 Cyl 5.9L;
• 1974-1974: Brougham; 8 Cyl 6.6L;

• 1974-1974: X; 8 Cyl 5.9L;

• 1974-1974: X; 8 Cyl 6.6L;

• 1971-1974: Base; 8 Cyl 5.9L;

• 1971-1974: Base; 8 Cyl 6.6L;

Fits 4 more submodels. (Show all) Show less info

VALEO OE REPLACEMENT CLUTCH KIT -- 11 in. disc diameter, 1.12 in. input shaft size, 10 spline; Includes clutch disc assembly, pressure plate cover assembly, release bearing, alignment tool, grease pack, and installation guide; Manufactured using components that exceed OE specifications; Offers long life and smooth engagement; Must be 3 speed for American Motors Hornet.

Fits the following 1971-1974 American Motors Matador submodels:

• 1974-1974: Brougham; 8 Cyl 5.9L;
• 1974-1974: Brougham; 8 Cyl 6.6L;

• 1974-1974: X; 8 Cyl 5.9L;

• 1974-1974: X; 8 Cyl 6.6L;

• 1971-1974: Base; 8 Cyl 5.9L;

• 1971-1974: Base; 8 Cyl 6.6L;

Fits 4 more submodels. (Show all) Show less info