Chrysler Conquest Brake Dust Shields

CENTRIC C-TEK BRAKE DISC, STANDARD, VENTED, SOLD INDIVIDUALLY -- 5 x 114.3 mm PCD bolt pattern; 276 mm outer diameter; 24 mm nominal thickness; 22.4 mm minimum thickness; This is a high quality OE replacement brake disc.

Fits the following 1988-1989 Chrysler Conquest submodels:

• 1988-1989: All Submodels; All Engines;

Akebono Pro-ACT Ultra-Premium Brake Pads

Akebono Pro-ACT Ultra-Premium brake pads utilize the aftermarket’s only OE-validated, application-specific friction formulations. This guarantees that Pro-ACT Ultra-Premium brake pads provide the ultimate braking experience to brand new performance levels or even better.

Engineered to eliminate noise, vibration and harshness (NVH), Pro-ACT Ceramic Disc Brake Pads provide the ultimate braking experience. Pro-ACT Ceramic Disc Pads are ideal for restoring OE ceramic pad performance, and for upgrading from conventional pads.

In addition to dramatically quieter braking, Pro-ACT Ceramic Pads provide best-in-class braking performance, including enhanced initial effectiveness (no break-in required), high resistance to fade, consistent brake pedal feel and ultra-low dusting for cleaner wheels and tires. Ceramic technology also causes minimal wear on brake rotors.

• Increased stopping power in critical braking situations
• Harmonically damped design for maximum control of NVH
• Vehicle specific optimized ceramic formulas for superior performance
• Post cured and heat scorched to ensure the highest initial effectiveness requiring no break-in procedures (exclusive to front formulations)
• Rotor-friendly pad formulations prevent uneven rotor wearing and pulsation complaints
• Precision-fit steel backing plates lead the industry in reducing vibration induced noise
• 100% chamfered and slotted to further enhance NVH control
• High resistance to fade with fast recovery
• Precision-fit shims aid in noise abatement and prevent shim migration
• Black powder coat finish provides OE-level corrosion resistance
• 100% asbestos-free formulations
• High-temperature resistant moly lube included in all boxes

Akebono’s Aftermarket disc pads contain the same materials, engineering, quality standards, and advanced technologies used to create their OE ceramic brake pads.

Warranty Information: 12 month - 12,000 mile limited warranty.

---

ACT Ceramic w/ Shims

Fits the following 1987-1989 Chrysler Conquest submodels:

• 1988-1989: TSi; 4 Cyl 2.6L;
• 1987-1987: Base; 4 Cyl 2.6L;

BENDIX TITANIUMETALLIC II BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Enjoy unmatched braking performance right out of the box with TitaniuMetallic II brake pads. These boast a completely reformulated TitaniuMetallic II blue coating that cuts down the required break-in period from 200 stops to just 50 stops, assuring greater stopping power sooner. They also have an all-new semi-metallic pad formulation that provides shorter stopping distances with less pedal effort. Additionally, these have noise-reducing shims and match OE pads in terms of design (chamfered and/or slotted), configuration (riveted and/or integrally-molded) and included components (attaching hardware and/or wear sensors).

Features:

• Asbestos-free
• Semi-metallic formulation provides superior braking performance
• TitaniuMetallic II coating shortens the break-in period
• Greater stopping power from the very first stop

Fits the following 1987-1989 Chrysler Conquest submodels:

• 1988-1989: TSi; 4 Cyl 2.6L;
• 1987-1987: Base; 4 Cyl 2.6L;

A1 CARDONE FRICTION CHOICE SEMI-LOADED BRAKE CALIPER, REMANUFACTURED, SOLD INDIVIDUALLY -- Includes mounting hardware for quick and easy installation; Does not include brake pads and bracket; Features OE quality seals, boots, and bleeder screws; 100 percent pressure tested for guaranteed performance; Undergone stringent quality control; Meets or exceeds OE specifications.

Fits the following 1987-1989 Chrysler Conquest submodels:

• 1987-1989: All Submodels; All Engines;

BECK ARNLEY PREMIUM BRAKE PADS, ORGANIC, 2-WHEEL SET

Restore the performance of your braking system with Beck Arnley Premium Brake Pads. These long lasting brake pads are made to be of exact fit and ready to install right out of the box. More than this, these pads are post-cured so that you don't need to have them broken in any more.

Features:

• Chamfered and/or slotted depending on OE design
• Formulated from rotor-friendly non-asbestos organic (NAO) friction materials
• Post-cured so there is no break-in required
• Pad assemblies are integrally molded and feature smooth-edged backing plates
• Precision-fit construction virtually eliminates noise and reduces dust output
• With chemically and mechanically bonded shims

Fits the following 1987-1989 Chrysler Conquest submodels:

• 1987-1989: All Submodels; All Engines;

BOSCH QUIETCAST PREMIUM BRAKE PADS, 2-WHEEL SET

Replace worn-down OE brake pads with Bosch QuietCast Premium Brake Pads. These have the same material type as your original pads, but boast of advanced platform-specific formulation to ensure top braking performance. They are also sculpted to match the chamfers and slots of the OE design, if any. Additionally, these feature rubber-core shims that are heat and pressure cured between two layers of steel to ensure excellent rubber-to-metal bonding that results in noise reduction, increased strength, and corrosion resistance. With Bosch QuietCast, you are assured of reliable braking performance that is pleasantly noise-free.

Features:

• Integrally molded Unimold design
• Laminated OE-style rubber-core shims
• Same-as-OE brake pad material type
• Advanced platform-specific pad material formulation
• Powdercoated backing plate
• Synthetic lubricant included

Fits the following 1987-1989 Chrysler Conquest submodels:

• 1987-1989: All Submodels; All Engines;

Forecast Trading
Forecast Trading offers high quality replacement parts that are manufactured by quality-certified factories, and engineered to the most current Original Equipment specifications.

Fits the following 1987-1989 Chrysler Conquest submodels:

• 1987-1989: All Submodels; All Engines;

DORMAN HELP! BRAKE BLEEDER SCREW -- M10-1.0 x 33 mm; Carded packaging; A high quality, OE replacement brake bleeder screw.

Fits the following 1987-1989 Chrysler Conquest submodels:

• 1988-1989: TSi; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"
• 1987-1987: Base; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN H"

• 1987-1987: Base; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"

Fits 1 more submodels. (Show all) Show less info

Fits the following 1987-1989 Chrysler Conquest submodels:

• 1987-1989: All Submodels; All Engines;

ATE Premium One Brake Pads

Friction just like the OE pads they replace, plus premium features for customer-pleasing brake performance. The ATE Premium One® advanced friction formulations reduce dusting and extend pad life, assuring quality and performance equal to or better than original equipment brake pads.

• OE engineered brake system technology assures optimum fit and performance
• Advanced friction formulations reduce dusting and extend pad life
• Application matched premium quality friction grade
• Underlayer design helps reduce noise, vibration and harshness
• Shims, chamfers, slots, wear sensors and other premium features included
• Restores original equipment pad performance, reduces wheel dusting and extends pad life.

Warranty Information: The ATE limited warranty (“Limited Warranty”) is issued by Continental Teves, Inc. ("CTI"), warrants that your ATE brake pads will be free of defects in material and workmanship for 12 months from the time of purchase

---

Fits the following 1987-1989 Chrysler Conquest submodels:

• 1988-1989: TSi; 4 Cyl 2.6L;
• 1987-1987: Base; 4 Cyl 2.6L;