Chrysler Cordoba Brake Dust Shields

EBC GREENSTUFF 2000 SERIES BRAKE PADS, ORGANIC, 2-WHEEL SET

Designed especially for sport compacts, muscle cars, and premium American- and European-built sedans, the EBC Greenstuff 2000 line of brake pads is the perfect choice for high performance braking during spirited street driving. Made with organic man-made aramid fibers such as DuPont Kevlar or Twaron, Greenstuff 2000 boasts of a nominal friction coefficient of 0.55. Additionally, each pad has its surface finished with EBC Brake-In coating to guarantee you a high initial brake effect. With Greenstuff 2000, you are free to cruise leisurely along highways without worry.

Features:

• Emits less dust than equivalent semi-metallic pads
• Proven in tests to stop a vehicle 20 feet sooner than stock pads
• Reduces heat fade and rotor wear
• Fully shimmed, chamfered, and slotted for silent braking
• Features EBC Brake-In surface coating to accelerate pad bed in after installation
• Greenstuff pads are for spirited street driving

Install these brake pads with the help of EBC's instructional video P/N E35DVD083 (sold separately).

Fits the following 1975-1977 Chrysler Cordoba submodels:

• 1975-1977: Base; 8 Cyl 5.2L;
• 1975-1977: Base; 8 Cyl 5.9L;

• 1975-1977: Base; 8 Cyl 6.6L;

Fits 1 more submodels. (Show all) Show less info

CENTRIC C-TEK BRAKE DISC, STANDARD, VENTED, SOLD INDIVIDUALLY -- 5 x 4.5 in. PCD bolt pattern; 10.98 in. outer diameter; 1.03 in. nominal thickness; 0.94 in. minimum thickness; This is a high quality OE replacement brake disc.

Fits the following 1975-1983 Chrysler Cordoba submodels:

• 1975-1983: All Submodels; All Engines;

HAWK PERFORMANCE HPS BRAKE PADS, SEMI-METTALIC, 2-WHEEL SET

Increase the braking power of your street legal performance vehicle by 20-40 percent with Hawk High Performance Street (HPS) Brake Pads! The unique ferro-carbon compound of these pads has a higher coefficient of friction over OE pads and has a higher resistance to fade over standard aftermarket replacements - giving you increased stopping power, reduced dust production, and longer pad and rotor life.

Features:

• Asbestos-free
• Low-dust and long-wear ferro-carbon compound
• Higher coefficient of friction over stock brake pads
• Higher resistance to brake fade than standard replacements
• High friction/torque hot or cold
• Virtually noise free
• Prolonged rotor life

Item Specifications:

• 0.6 in. thickness

Fits the following 1976-1977 Chrysler Cordoba submodels:

• 1976-1977: All Submodels; All Engines;

BENDIX CQ BRAKE PADS, CERAMIC, 2-WHEEL SET

Bendix CQ Brake Pads are designed to meet OE specifications while utilizing non-asbestos organic (NAO) ceramic technology. Formulated to generate less performance-inhibiting brake dust, these pads provide smooth braking and greater stopping power. Additionally, most CQ Pads feature shims, chamfers, and slots to mirror or improve upon OE noise insulation design.

Features:

• Asbestos-free
• Low dust formulation

Fits the following 1975-1977 Chrysler Cordoba submodels:

• 1975-1977: Base; 8 Cyl 5.2L;
• 1975-1977: Base; 8 Cyl 5.9L;

• 1975-1977: Base; 8 Cyl 6.6L;

Fits 1 more submodels. (Show all) Show less info

A1 CARDONE FRICTION CHOICE BRAKE CALIPER, UNLOADED, NATURAL FINISH, REMANUFACTURED

Bring back the braking power of your vehicle with A1 Cardone Friction Choice Brake Caliper. This high quality brake caliper guarantees your vehicle with stopping power you need each time you want to stop.

Features:

• With Pre-lubricated guide bolts on mounting bracket that prevents seizing
• 100 percent OE like rubber seals to guarantee factory-like performance
• Tested with 100 percent pressure to ensure proper braking function
• Trouble-free bleeding and positive seal which is provided by the new bleeder screws
• Offered with or without mounting bracket to give you choices of configurations that best meets your needs

Item Details:

• Includes mounting hardware
• Does not include brake pads and mounting bracket

Fits the following 1975-1977 Chrysler Cordoba submodels:

• 1975-1977: All Submodels; All Engines;

PRONTO BRAKE DISC, VENTED, SOLD INDIVIDUALLY

Repair your brake system with Pronto OE replacement brake discs. These are manufactured by ISO certified factories to meet OE fit, form, and function and ensure smooth and vibration-free braking. They are engineered to high metallurgical standards for consistent strength, quality, and performance. The discs are given a non-directional swirl finish to eliminate the need for machining prior to installation; and they feature precise hub hole chamfers to ensure a hub centric fit. All in all, you are assured of complete repair when you use Pronto OE replacements.

Specifications:

• 5 x 4.5 in. bolt pattern
• 10.98 in. disc diameter
• ISO certified

Features:

• Designed with multiple vane configurations for suitable heat dissipation and improved performance
• Precision balanced to guarantee smooth vibration-free performance and reduce brake noise
• Non-directional swirl finish does away with machining prior to installation
• Precise hub hole chamfers ensure hub centric fit

Fits the following 1975-1983 Chrysler Cordoba submodels:

• 1975-1983: All Submodels; All Engines;

AC DELCO DURASTOP BRAKE SHOES, NEW, 2-WHEEL SET -- This set of high quality brake shoes directly replaces OE number 18029646.

Fits the following 1976-1983 Chrysler Cordoba submodels:

• 1976-1983: Base; All Engines;
• 1980-1982: LS; All Engines;

• 1980-1980: Crown; All Engines;

• 1979-1980: 300; All Engines;

Fits 2 more submodels. (Show all) Show less info

STANDARD STOPLIGHT SWITCH

Standard Brake Light switches are constructed using brass or high-impact composite housings as specified for optimum performance and durability. It has copper alloy conductors for guaranteed superior electrical conductivity with low resistive losses.

Standard Engine Management is a leading producer and distributor of a complete line of engine management related products which include ignition and emission parts, on-board computers, ignition wires, battery cables, and fuel system parts. Their products are output of intensive research and development to guarantee that it will meet technician's needs.

Features:

• Meets or exceeds OE specifications
• Specially designed spring and contact arrangement reduces arcing for long service life
• 100% tested to check both mechanical and electrical switching performance
• Designed for strength using high-quality materials to match the needs of service professionals
• No Connector
• 1 Electrical Connector
• 2 Male Blade-Type Terminals

Fit Note:	Without Cruise Control
Type:	OE replacement
Quantity Sold:	Sold individually
Warranty:	3-year or 36,000-mile Standard limited warranty

Fits the following 1975-1983 Chrysler Cordoba submodels:

• 1982-1983: All Submodels; All Engines;
• 1981-1981: LS; 8 Cyl 5.2L;
• 1975-1981: Base; 8 Cyl 5.2L;
• 1980-1980: 300; 6 Cyl 3.7L;
• 1980-1980: Base; 6 Cyl 3.7L;
• 1980-1980: Crown; 6 Cyl 3.7L;
• 1980-1980: LS; 6 Cyl 3.7L;
• 1979-1979: 300; 8 Cyl 5.2L;
• 1979-1979: 300; 8 Cyl 5.9L;
• 1975-1979: Base; 8 Cyl 5.9L;
• 1975-1978: Base; 8 Cyl 6.6L;

Fits 9 more submodels. (Show all) Show less info

DORMAN BRAKE MASTER CYLINDER CAPS, SET OF 2 -- Restores missing or broken master cylinder caps to avoid brake fluid contamination; This high quality brake master cylinder cap set directly replaces OE number 5204056.

Fits the following 1979-1983 Chrysler Cordoba submodels:

• 1983-1983: Base; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN H"
• 1983-1983: Base; 8 Cyl 5.2L; "GAS, CARB, Naturally Aspirated, VIN P"

• 1981-1982: Base; 8 Cyl 5.2L; "GAS, CARB, Naturally Aspirated, VIN K"

• 1981-1982: Base; 8 Cyl 5.2L; "GAS, CARB, Naturally Aspirated, VIN M"

• 1981-1982: LS; 8 Cyl 5.2L; "GAS, CARB, Naturally Aspirated, VIN K"

• 1981-1982: LS; 8 Cyl 5.2L; "GAS, CARB, Naturally Aspirated, VIN M"

• 1981-1981: Base; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN E"

• 1981-1981: LS; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN E"

• 1980-1980: 300; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN C"

• 1980-1980: 300; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN D"

• 1980-1980: Base; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN C"

• 1980-1980: Base; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN D"

• 1980-1980: Crown; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN C"

• 1980-1980: Crown; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN D"

• 1980-1980: Crown; 8 Cyl 5.2L; "GAS, CARB, Naturally Aspirated, VIN G"

• 1980-1980: Crown; 8 Cyl 5.2L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1980-1980: LS; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN C"

• 1979-1980: 300; 8 Cyl 5.2L; "GAS, CARB, Naturally Aspirated, VIN G"

• 1979-1980: 300; 8 Cyl 5.2L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1979-1980: Base; 8 Cyl 5.2L; "GAS, CARB, Naturally Aspirated, VIN G"

• 1979-1980: Base; 8 Cyl 5.2L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1979-1979: 300; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN J"

• 1979-1979: 300; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN K"

• 1979-1979: 300; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN L"

• 1979-1979: Base; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN J"

• 1979-1979: Base; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN K"

• 1979-1979: Base; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN L"

Fits 25 more submodels. (Show all) Show less info

RUSSELL SPEED BLEEDER SCREWS, SET OF 2 -- 3/8 in. - 24 thread; 1 in. overall length; Features patented thread sealing that displaces air and moisture during thread engagement and eliminates air being pulled back into the system during bleeding; The centerless ground check ball is made of 410 stainless steel to resist corrosion and galling; With a unique double-patent design that ensures authenticity; Has computer engineered and wound spring to ensure accurate progressive spring rate and OEM style sealing area to guarantee positive leak-proof seal; Assures maximum flow through its precision honed ID to enhance bleeding; Available to fit any hydraulic brake or clutch system; Easy installation.

Fits the following 1975-1981 Chrysler Cordoba submodels:

• 1975-1981: All Submodels; All Engines;

ENERGY SUSPENSION TORSION BAR DUST BOOT KIT, BLACK -- Must reuse OE metal hardware; Made of Hyper-Flex polyurethane to resist oil, road salt, and other corrosives; Lasts longer and looks better compared to stock; Requires reuse of OE metal hardware.

Fits the following 1975-1980 Chrysler Cordoba submodels:

• 1975-1980: All Submodels; All Engines;

SPECTRE MASTER CYLINDER COVER, CHROME PLATED -- 3-1/4 in. x 6 in.; With one chrome plated bail wire for retention; Gasket not included; Made of triple steel; Fits 1971-1979 Chrysler.

Fits the following 1975-1979 Chrysler Cordoba submodels:

• 1975-1979: All Submodels; All Engines;

ACCEL ARMOR SHIELD SPARK PLUG WIRES, BLUE, SET OF 6

Accel Armor Shield Spark Plug Wires give extreme spark energy while gearing up a street race, enhances the appearance of braided fuel lines and coolant hoses.

Specifications:

• 8 mm diameter
• Non-assembled
• RFI suppression
• Silicone distributor and spark plug boot material
• Black distributor boot color
• Blue spark plug boot color
• Female/socket distributor terminal ends
• Eight multi-angle spark plug boot ends
• Spiral core conductor style
• Includes coil wire

Features:

• Universal fit design
• Color matched blue silicone boots
• Carbon and graphite conductive mat, EPDM insulation and fiberglass braiding
• Silicone jacket with braided armor shielding

Does not include coil wire.

Fits the following 1980-1983 Chrysler Cordoba submodels:

• 1980-1983: Base; 6 Cyl 3.7L;
• 1980-1982: LS; 6 Cyl 3.7L;

• 1980-1980: 300; 6 Cyl 3.7L;

• 1980-1980: Crown; 6 Cyl 3.7L;

Fits 2 more submodels. (Show all) Show less info