BMW 325i Brake Pad Set

EBC ULTIMAX BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Replace your worn out brake pads with new EBC Ultimax Brake Pads. Manufactured according to OE specifications, these long lasting pads completely eliminate brake judder and reduce brake disc wear by up to 50 percent. It's common practice to replace stock discs when replacing pads, but with Ultimax, your discs can last two pad sets. This means that with EBC Ultimax Brake Pads, you get to enjoy big savings and high performance braking over a good period of time.

Features:

• Manufactured from a semi-metallic compound with aramid soft fibers
• With center slots and edge chamfers plus noise reduction shims on the reverse
• EBC red Brake-In surface coating conditions rotors after installation allowing pads to quickly deliver their stopping power
• Hardware and wear leads included where fitted as standard by factory
• Long lasting high friction pad designed for non-sport urban driving on all sedans, SUVs, and light trucks

• Fit Note: Sedan, RWD, Wagon, RWD
• Location: Front
• Material: Kevlar
• Series: EBC Ultimax
• Type: OE replacement
• Quantity Sold: 2-wheel set
• Warranty: 3-month or 5,000-mile EBC warranty excluding wear and tear or race use

Fits the following 2001-2004 BMW 325i submodels:

• 2001-2004: Base; 6 Cyl 2.5L;

CENTRIC POSI QUIET CERAMIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Ceramic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. These promote earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims and hardware kit

• Fit Note: mfrbodycodename : E36
• Location: Rear
• Material: Ceramic
• Series: Centric Posi-Quiet
• Type: OE replacement
• Quantity Sold: 2-wheel set
• Warranty: 90-day or 3,000-mile Centric limited warranty

Fits the following 1992-2005 BMW 325i submodels:

• 1992-2005: All Submodels; All Engines;

AKEBONO EURO ULTRA-PREMIUM BRAKE PADS, CERAMIC, 2-WHEEL SET

Return the braking power of your European car back to its optimum level with Akebono Euro Brake Pads. Made of highly advanced ceramic formulation, these pads offer superb stopping power, reduced dust, and extended disc life. Additionally, front Euro pads are post-cured to maximize initial braking effectiveness and eliminate the break-in process.

Features:

• Asbestos-free
• Vehicle-optimized European formulation provides superior performance
• Harmonically damped, chamfered, slotted, and shimmed for NVH control
• Causes only minimal rotor wear to prolong rotor life
• Backing plates are powdercoated for corrosion resistance
• Includes high-temperature resistant moly lube

• Location: Front
• Material: Ceramic
• Series: Akebono Euro
• Type: OE replacement
• Quantity Sold: 2-wheel set

Fits the following 2001-2005 BMW 325i submodels:

• 2001-2005: All Submodels; All Engines;

HAWK PERFORMANCE HPS BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Increase the braking power of your street legal performance vehicle by 20-40 percent with Hawk High Performance Street (HPS) Brake Pads! The unique ferro-carbon compound of these pads has a higher coefficient of friction over OE pads and has a higher resistance to fade over standard aftermarket replacements - giving you increased stopping power, reduced dust production, and longer pad and rotor life.

Specifications:

• 0.75 in. thickness

• Asbestos-free
• Low-dust and long-wear ferro-carbon compound
• Higher coefficient of friction over stock brake pads
• Higher resistance to brake fade than standard replacements
• High friction/torque hot or cold
• Virtually noise free
• Prolonged rotor life

• Location: Front
• Material: Semi-metallic
• Series: Hawk HPS
• Type: Direct fit
• Quantity Sold: 2-wheel set
• Warranty: Lifetime Hawk Performance limited warranty

Fits the following 2006-2006 BMW 325i submodels:

• 2006-2006: All Submodels; All Engines;

BENDIX TITANIUMETALLIC II BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Enjoy unmatched braking performance right out of the box with TitaniuMetallic II brake pads. These boast a completely reformulated TitaniuMetallic II blue coating that cuts down the required break-in period from 200 stops to just 50 stops, assuring greater stopping power sooner. They also have an all-new semi-metallic pad formulation that provides shorter stopping distances with less pedal effort. Additionally, these have noise-reducing shims and match OE pads in terms of design (chamfered and/or slotted), configuration (riveted and/or integrally-molded) and included components (attaching hardware and/or wear sensors).

Features:

• Asbestos-free
• Integrally molded
• Chamfered
• Non-slotted
• Semi-metallic formulation provides superior braking performance
• TitaniuMetallic II coating shortens the break-in period
• Greater stopping power from the very first stop

• Location: Front
• Material: Semi-metallic
• Series: Bendix Titaniumetallic II
• Type: Direct fit
• Quantity Sold: 2-wheel set

Fits the following 2001-2005 BMW 325i submodels:

• 2001-2005: Base; 6 Cyl 2.5L;

BECK ARNLEY PREMIUM BRAKE PADS, ORGANIC, 2-WHEEL SET

Restore the performance of your braking system with Beck Arnley OE Foreign Branded Brake Pads. These long lasting brake pads are made to be of exact fit and ready to install right out of the box. More than this, these pads are post-cured so that you don't need to have them broken in any more.

Features:

• Formulated from rotor-friendly non-asbestos organic (NAO) friction materials
• Post-cured so there is no break-in required

Notes: Brought to you by Beck Arnley, this product is outsourced from quality-approved OE Foreign Brands, particularly from Asia and Europe. Comes in OE supplier packaging with Beck Arnley label.

• Fit Note: Front ATE Calipers
• Location: Rear
• Material: Organic
• Series: Beck Arnley Foreign Branded
• Type: OE replacement
• Quantity Sold: 2-wheel set
• Warranty: 12-month or 12,000-mile Beck Arnley limited warranty

Fits the following 1991-2005 BMW 325i submodels:

• 1991-2005: All Submodels; All Engines;

WAGNER THERMOQUIET BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Replace your old and worn-down brake pads with Wagner ThermoQuiet, the most innovative and technologically-advanced brake pads available today. These feature a patented Integrally Molded Insulator (IMI) one-piece design that provides maximum noise damping and brake heat dissipation. Moreover, they are made using EDGE Laser-Shaped Friction technology that custom-shapes the friction material to focus caliper force, further reducing vibration and noise.

Features:

• Asbestos-free
• OE-match material and design
• Maximum noise damping
• Excellent heat dissipation during braking
• Superior stopping power
• Reduced dust
• Long lasting

• Location: Rear
• Material: Semi-metallic
• Series: Wagner ThermoQuiet
• Type: OE replacement
• Quantity Sold: 2-wheel set
• Warranty: Lifetime Wagner limited warranty

Fits the following 2001-2005 BMW 325i submodels:

• 2001-2005: Base; All Engines;

POWERSTOP Z16 EVOLUTION BRAKE PADS, CERAMIC, 2-WHEEL SET

Improve the braking performance of your vehicle with Power Stop Z16 Evolution Brake Pads. The premium carbon-ceramic compound used by these pads are made using OE positive mold technology to attain uniform friction density - a quality that helps reduce braking noise and premature pad wear. Moreover, this friction compound is formulated to produce minimal dust, reduce rotor wear, and provide 20 percent more stopping power than the leading competition. Pad surfaces are thermally scorched to reduce break-in time; and dual rubber-backed shims are included for noise abatement that is six times better than that of plain steel shims. Manufactured under TS16949 standards, the pads are easy to install and feature slots and chamfers according to OE specifications. With all of these features, it is no wonder that Z16 Evolution Brake Pads are the preferred friction lining of professional technicians.

Features:

• Asbestos-free
• Low-dust premium carbon-ceramic formulation
• Positive molded for improved wear characteristics
• Chamfered and slotted for noise abatement
• Thermal scorched pad surfaces for fast break-in

• Fit Note: Coupe
• Location: Front
• Material: Ceramic
• Series: Powerstop Z16 Evolution
• Type: Direct fit
• Quantity Sold: 2-wheel set
• Warranty: 2-week or 500-mile Powerstop limited warranty

Fits the following 1991-1995 BMW 325i submodels:

• 1992-1995: All Submodels; All Engines;
• 1991-1991: Base; All Engines;

AC DELCO DURASTOP BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Ensure long-term braking safety with AC Delco DuraStop Brake Pads. The DuraStop line utilizes friction material compounds that suit specific vehicle applications, creating unique friction formulations that provide reliable stopping power over a wide range of operating temperatures and conditions, produce less dust, and last longer. Shims, slots, and chamfers are combined with pads that are made for applications that need extra noise abatement. Additionally, among the many products available in the market today, these pads are the most thoroughly tested by independent quality assurers for braking effectiveness, noise/vibration/harshness (NVH), and durability. All in all, this means that you can expect excellent and quiet stopping performance for a long period of time.

Features:

• Vehicle-specific non-ferrous friction formula
• 100 percent asbestos-free
• Produces less dust
• Powdercoated backing plate ensures professional protection and appearance

• Fit Note: Sedan, 4-Wheel ABS, RWD, Wagon, 4-Wheel ABS, RWD, With Front Disc Brake, Car
• Location: Front
• Material: Semi-metallic
• Series: AC Delco DuraStop
• Type: OE replacement
• Quantity Sold: 2-wheel set
• Warranty: Lifetime AC Delco limited warranty

Fits the following 2002-2002 BMW 325i submodels:

• 2002-2002: Base; 6 Cyl 2.5L; "GAS, FI, M54, Naturally Aspirated"

BOSCH QUIETCAST PREMIUM BRAKE PADS, 2-WHEEL SET

Replace worn-down OE brake pads with Bosch QuietCast Premium Brake Pads. These have the same material type as your original pads, but boast of advanced platform-specific formulation to ensure top braking performance. They are also sculpted to match the chamfers and slots of the OE design, if any. Additionally, these feature rubber-core shims that are heat and pressure cured between two layers of steel to ensure excellent rubber-to-metal bonding that results in noise reduction, increased strength, and corrosion resistance. With Bosch QuietCast, you are assured of reliable braking performance that is pleasantly noise-free.

Features:

• Integrally molded Unimold design
• Laminated OE-style rubber-core shims
• Same-as-OE brake pad material type
• Advanced platform-specific pad material formulation
• Powdercoated backing plate
• Synthetic lubricant included

• Fit Note: Wagon
• Location: Front
• Material: Organic
• Series: Bosch Quietcast Premium
• Type: OE replacement
• Quantity Sold: 2-wheel set

Fits the following 2001-2005 BMW 325i submodels:

• 2004-2005: All Submodels; All Engines;
• 2001-2003: Base; All Engines;

ATE PREMIUMONE BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Restore stock brake performance with ATE PremiumOne brake pads. Made to a higher standard than conventional replacements, these pads use advanced OE engineered friction formulations that are application-matched for optimum fit and performance. Shims, chamfers, slots, and a pad underlayer design are normally added as features to reduce noise, vibration, and harshness (NVH). Where applicable, they also have OE safety and control components or hardware to ensure complete repair.

Features:

• Reduced-dust formulation
• Long pad life
• Minimized NVH
• Easy installation.

• Location: Front
• Material: Semi-metallic
• Series: ATE PremiumOne
• Type: OE replacement
• Quantity Sold: 2-wheel set
• Warranty: 12-month or 12,000-mile ATE limited warranty

Fits the following 2006-2006 BMW 325i submodels:

• 2006-2006: Base; All Engines;

Textar Original Brake Pads

The Textar OE formulated brake pads are designed and manufacturing to original equipment specifications, assuring superior quality and fit.

Textar brake pads are derived from 160 different formulations, some of these consisting of more than 20 different raw materials and each one carefully selected to meet the various requirements of a vehicle, its braking system, specific power, loads and braking characteristics.

• OE-Equivalent and Direct Fit application.
• Include the OE specified shims.
• Low noise and reduced vibrations.
• Formulated to OE Specifications.
• Superior friction qualities.
• Organic blended compound.

• Location: Rear
• Material: Semi-metallic
• Type: OE replacement
• Quantity Sold: 2-wheel set

Fits the following 2006-2006 BMW 325i submodels:

• 2006-2006: Base; 6 Cyl 3.0L;

Pagid Brake Pads

Pagid manufactures a full range of brake pads to give wide vehicle coverage and are manufactured to O.E. specifications including more than 20 types of noise correction materials and packaged accessories.

Pagid supplies high performance friction materials to sports car manufacturers such as Aston Martin, Audi, Ferrari and Porsche. In racing its products are used at all levels from the club racing competitor up to professional and factory-backed GT, sports car and touring racing teams.

Engineered to deliver exceptional performance, comfort and safety, Pagid is the first choice of many of the world’s vehicle manufacturers for original equipment brake friction.

• A powder coat finish gives a clean look and protects it from corrosion
• Specifically developed and calibrated for each vehicle application.
• The under-layer provides excellent shear strength and thermal barrier resistance.
• Disc cracking resistance and noise prevention
• The backing plates for brake pads meet the most demanding requirements

• Fit Note: Sedan, 4-Wheel ABS, RWD, Wagon, 4-Wheel ABS, RWD
• Location: Rear
• Material: Semi-metallic
• Type: OE replacement
• Quantity Sold: 2-wheel set

Fits the following 2001-2005 BMW 325i submodels:

• 2001-2005: Base; 6 Cyl 2.5L;

ATE Premium One Brake Pads

Friction just like the OE pads they replace, plus premium features for customer-pleasing brake performance. The ATE Premium One® advanced friction formulations reduce dusting and extend pad life, assuring quality and performance equal to or better than original equipment brake pads.

• OE engineered brake system technology assures optimum fit and performance
• Advanced friction formulations reduce dusting and extend pad life
• Application matched premium quality friction grade
• Underlayer design helps reduce noise, vibration and harshness
• Shims, chamfers, slots, wear sensors and other premium features included
• Restores original equipment pad performance, reduces wheel dusting and extends pad life.

• Fit Note: Convertible, 4-Wheel ABS, RWD, Sedan, 4-Wheel ABS, RWD, Wagon, 4-Wheel ABS, RWD
• Location: Front
• Material: Semi-metallic
• Type: OE replacement
• Quantity Sold: 2-wheel set

Fits the following 1992-2005 BMW 325i submodels:

• 1992-2005: Base; 6 Cyl 2.5L;