Ferrari F355 F1 Brake Pad Set

• Asbestos-free
• Made from a innovative blend of Kevlar fibers and enhanced ceramic particles
• Produces 60-90 percent less dust than OE pads
• Brake bite from cold is as good as OE or better
• Brake performance only increases as the pads heat up
• Built with shims, slots, and chamfers for silent braking
• Coated with Brake-In compound for faster break-in and greater initial braking effect

CENTRIC POSI QUIET EXTENDED WEAR SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Extended Wear Semi-Metallic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance, even at high temperatures
• Low rotor wear
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

• Asbestos-free
• Optimized for both race track and street use
• Excellent brake bite from cold
• Progressive feel
• Bonded to the steel backing plates with multiple high-strength interlock holes and unique chemical interlayer to increase bond strength factor by five
• Chemical interlayer process triples shear resistance versus common organic pads
• Easy on rotors, leaves rotors smooth not scored
• Minimal heat transfer
• Pre-bedded by heat scorching for faster bed-in, beds within 3-4 stops on the race track
• Outfitted with deep V-groves that catches unwanted dirt and dust while improving ventilation
• Impressive lifespan, capable of performing in 4 to 5 race events with total of 30 laps duration or 20,000 miles of street use

EBC ORANGESTUFF 9000 BRAKE PAD SETS

EBC Orangestuff 9000 Brake Pad Sets are specially engineered to provide high-quality stopping power with approximately 0.5 Mu at first brake and does not drop below 0.4 Mu, which is unnoticeable in closed circuit racing use. The formulations of these pads offers longer wear life by 40-60 percent, better initial bite, and better fade resistance at disc temperatures where rotor is radiant red. Made from premium semi-metallic compounds, these Orangestuff 9000 brake pads from EBC will definitely stop you whenever and wherever you want.

In addition, these pads are not made for any highway style driving, not European street legal, and not ECE R 90 street legal. But they are more designed to scrub-off speed on closed circuit racing use.

Features:

• Deep V-grooves for better venting and to catch dirt, debris, and dust for consistent braking performance
• 0.5 Mu rising to 0.6 Mu under load
• Hardwearing steel backing plate
• High strength granulated interlayer which improves bond strength and absorbs shocks

Notes:

• For closed circuit racing only or not road legal

• Intense resistance to fade under load
• Utterly resists brake disc vibration
• Exhibits a dust rating similar to OEM parts
• Shimmed to reduce noise
• Slotted to avoid heat cracks
• Chamfered to minimize low speed noise
• Coated with Brake-In compound for faster break-in and greater initial braking effect