BMW Brakes Replacement

EBC PREMIUM STREET KIT - STAGE 1 BRAKE DISC AND PAD KIT

Leave your braking problems behind with EBC Premium Street Stage 1 Brake Disc and Pad Kit. These kits are the perfect combination of OE replacement rotors and pads, making daily driving and stopping fast, safe, and easy.

EBC UPR Premium Brake Disc Details:

• Made from G3000 gray iron
• Precision machined
• Tested and inspected for quality and performance

EBC Ultimax Brake Pad Details:

• Unique Brake-In coating for instant braking efficiency on installation
• Powder coat finish provides lifetime resistance against corrosion and stops moisture build-up
• AF42/66 friction material for long lasting pad life

• Fit Note: Coupe, RWD, Rotor Dia. 10.7 In.
• Location: Rear
• Series: EBC Premium Street Kit - Stage 1
• Quantity Sold: 2-wheel set
• Warranty: 3-month or 5,000-mile EBC warranty excluding wear and tear or race use

Fits the following 1978-1982 BMW 633CSi submodels:

• 1978-1982: Base; 6 Cyl 3.2L;

Powerstop 1-Click Street Warrior Z26 Brake Kits were designed with the muscle car or tuner enthusiast in mind. It increases stopping power up to 20% over stock brake parts. The Carbon Fiber/Ceramic Matrix Brake Pad formula resists fade under the most demanding driving conditions. The Drilled and Slotted rotors provide added performance over OEM brake rotors through their Cross-Drilled construction and extra cooling benefits. The slots in the brake rotors wipe away gas and debris between the pad and the rotor to enhance pad bite.

• Proprietary Z26 Carbon Fiber/Ceramic Matrix brake pads enhance stopping power
• Each Powerstop kit includes necessary brake sensors and hardware where needed – up to a $100 value you’ll only find here! (see item details for specifics)
• Quiet, low-dust copper-free formula
• Up to 20 percent more stopping power than OEM equipment and other brands
• Recommended for performance street driving
• Adds extra stopping power to tame vehicles that have been enhanced with power adders or larger wheels
• Big Brake Performance without the Big Brake Kit price tag
• Powerstop has done the engineering so you don't have to - they match components to maximize performance

• Fit Note: Sedan, RWD
• Location: Front
• Series: Powerstop Street Warrior (Z26)
• Quantity Sold: 2-wheel set
• Warranty: 3-year / 36,000 Mile Powerstop Limited Warranty

Fits the following 1994-1995 BMW 540i submodels:

• 1994-1995: Base; 8 Cyl 4.0L;

CENTRIC PREMIUM BRAKE DISC, FLOATING TYPE, VENTED, SOLD INDIVIDUALLY

Get the most out of your stock braking system with Centric Premium OE replacement brake discs. These rotors are manufactured using OE specifications and processes under strict QS and ISO quality standards to give you an ever reliable braking performance. Furthermore, they are given machined finishes for smoother and cleaner appearance.

Specifications:

• 5 x 120 mm bolt pattern
• 286 mm disc diameter
• 15 mm bolt size
• 20.4 mm minimum thickness

Features:

• Manufactured to meet QS and ISO quality system standards
• Utilizes an electrocoating finish that provides long lasting corrosion protection
• Designed to withstand 400 hours of salt water exposure without rusting
• Double disc grinding ensures parallelism, eliminates run out, and provides near perfect disc thickness
• The double disc grinding also leaves a non-directional finish on the friction surface area for more effective pad-disc break in while providing quieter and smoother stops
• Center-split core casting offers proper heat transfer and thermal efficiency for superior braking and safety
• 100 percent fully machined hat delivers better disc balance
• Mill-corrected to a tolerance of less than 2 oz. per inch

• Location: Front
• Series: Centric Premium
• Quantity Sold: Sold individually
• Warranty: 90-day or 3,000-mile Centric limited warranty
• Design: Plain surface

Fits the following 1997-2002 BMW Z3 submodels:

• 2001-2002: Roadster; 6 Cyl 2.5L;
• 1997-2002: All Submodels; All Engines;

• 1999-2000: Coupe; All Engines;
• 1999-2000: Roadster; All Engines;
• 1997-1998: Roadster; 6 Cyl 2.8L;

Fits 3 more submodels. (Show All) Show less info

AKEBONO EURO ULTRA-PREMIUM BRAKE PADS, CERAMIC, 2-WHEEL SET

Return the braking power of your European car back to its optimum level with Akebono Euro Brake Pads. Made of highly advanced ceramic formulation, these pads offer superb stopping power, reduced dust, and extended disc life. Additionally, front Euro pads are post-cured to maximize initial braking effectiveness and eliminate the break-in process.

Features:

• Asbestos-free
• Vehicle-optimized European formulation provides superior performance
• Harmonically damped, chamfered, slotted, and shimmed for NVH control
• Causes only minimal rotor wear to prolong rotor life
• Backing plates are powdercoated for corrosion resistance
• Includes high-temperature resistant moly lube

• Location: Front
• Material: Ceramic
• Series: Akebono Euro
• Type: OE replacement
• Quantity Sold: 2-wheel set

Fits the following 2003-2008 BMW Z4 submodels:

• 2006-2008: Roadster 3.0i; All Engines;
• 2003-2005: All Submodels; All Engines;

HAWK PERFORMANCE HPS BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Increase the braking power of your street legal performance vehicle by 20-40 percent with Hawk High Performance Street (HPS) Brake Pads! The unique ferro-carbon compound of these pads has a higher coefficient of friction over OE pads and has a higher resistance to fade over standard aftermarket replacements - giving you increased stopping power, reduced dust production, and longer pad and rotor life.

Specifications:

• 0.56 in. thickness

Features:

• Asbestos-free
• Low-dust and long-wear ferro-carbon compound
• Higher coefficient of friction over stock brake pads
• Higher resistance to brake fade than standard replacements
• High friction/torque hot or cold
• Virtually noise free
• Prolonged rotor life

• Location: Front
• Material: Semi-metallic
• Series: Hawk HPS
• Type: Direct fit
• Quantity Sold: 2-wheel set
• Warranty: Lifetime Hawk Performance limited warranty

Fits the following 1977-1982 BMW 320i submodels:

• 1977-1982: All Submodels; All Engines;

BENDIX CQ BRAKE PADS, CERAMIC, 2-WHEEL SET

Bendix CQ Brake Pads are designed to meet OE specifications while utilizing non-asbestos organic (NAO) ceramic technology. Formulated to generate less performance-inhibiting brake dust, these pads provide smooth braking and greater stopping power. Additionally, most CQ Pads feature shims, chamfers, and slots to mirror or improve upon OE noise insulation design.

Features:

• Asbestos-free
• Low dust formulation
• Integrally molded
• Non-chamfered
• Slotted

This brake pad set comes with pad lubricant. Shims not included.

• Location: Front
• Material: Ceramic
• Series: Bendix CQ
• Type: OE replacement
• Quantity Sold: 2-wheel set

Fits the following 1985-1986 BMW 735i submodels:

• 1985-1986: Base; 6 Cyl 3.5L;

KOOL VUE CM SERIES BRAKE PADS, 2-WHEEL SET -- Made from high quality Kevlar fibre-based compound with ceramic particles that lasts longer; Offers more quiet and better braking than pre-ceramic compound pads; Minimizes brake dust up to 50 percent compared to standard pads; Comes with center line slots to prevent cracking; Perfect for high-speed spirited street driving; Suitable for highly tuned and high horsepower cars; Backed by 2-year Kool Vue limited warranty.

• Location: Front
• Material: Organic
• Series: Kool Vue CM
• Type: OE replacement
• Quantity Sold: 2-wheel set
• Warranty: 2-year Kool Vue limited warranty

Fits the following 1996-1998 BMW Z3 submodels:

• 1997-1998: Roadster; 6 Cyl 2.8L;
• 1996-1998: Roadster; 4 Cyl 1.9L;

BRAKE DISC, NATURAL FINISH, VENTED, SOLD INDIVIDUALLY

A high quality, OE replacement brake disc. This REPLACEMENT brake disc is made from premium material for optimum disc wear and manufactured to OE comparable design, fit and specifications for balance and reliability.

Specifications:

• 5 x 4.72 in. bolt pattern
• 11.87 in. outer diameter
• 3.11 in .inner diameter
• 0.59 in. bolt size
• 0.8 in. minimum thickness
• Non-directional

Features and Benefits:

• Vented construction

• Location: Front
• Quantity Sold: Sold individually
• Warranty: 1-year, unlimited-mileage warranty
• Design: Plain surface

Fits the following 1994-1995 BMW 530i submodels:

• 1994-1995: All Submodels; All Engines;

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

• Fit Note: Convertible, 4-Wheel ABS, RWD, Coupe, 4-Wheel ABS, RWD
• Location: Rear, Driver Or Passenger Side
• Quantity Sold: Sold individually
• Warranty: 2-year Brembo limited warranty
• Design: Plain surface

Fits the following 2001-2006 BMW 325Ci submodels:

• 2001-2006: Base; 6 Cyl 2.5L;

A1 CARDONE FRICTION CHOICE SEMI-LOADED BRAKE CALIPER, REMANUFACTURED, SOLD INDIVIDUALLY -- Includes bracket and mounting hardware for quick and easy installation; Does not include brake pads; Features OE quality seals, boots, and bleeder screws; 100 percent pressure tested for guaranteed performance; Undergone stringent quality control; Meets or exceeds OE specifications.

• Fit Note: With Metal Piston, With Mounting Bracket
• Location: Front, Passenger Side
• Series: A1 Cardone Friction Choice
• Type: Semi-loaded, OE replacement
• Color/Finish: Natural
• Condition: Remanufactured
• Quantity Sold: Sold individually
• Warranty: Lifetime A1 Cardone limited warranty

Fits the following 2003-2005 BMW Z4 submodels:

• 2003-2005: 2.5i; 6 Cyl 2.5L;

BOLTON PREMIERE SLOTTED AND DIMPLED BRAKE DISCS, VENTED, GOLD ZINC, SET OF 2

This Bolton Premiere product is manufactured from high quality and durable material to enhance the performance of your brake disc set. They come in gold zinc finish for great looks while preventing corrosion and are sold in pairs for either front or rear for a hassle-free buying experience.

Specifications:

• 5 x 4.72 in. bolt pattern
• 11.65 in. outer diameter

Features and Benefits:

• Slotted and dimpled design allows more effective cooling
• Less prone to cracking than the cross-drilled brake discs
• Lighter weight and provide the most performance benefit for acceleration
• Vented construction; the set of vanes pump air through the disc to provide cooling
• Run cooler and are essential for competition cars or any vehicle where dependable performance is very important

• Fit Note: Sedan, RWD, Wagon, RWD
• Location: Front, Driver And Passenger Side
• Material: Cast iron
• Quantity Sold: Set of 2
• Warranty: 1-year, unlimited-mileage Bolton Premiere warranty
• Design: Dimpled and slotted

Fits the following 2001-2003 BMW 525i submodels:

• 2001-2003: All Submodels; All Engines;
• 2001-2003: Base; 6 Cyl 2.5L;

KLEEN WHEELS BRAKE DUST SHIELDS, TURBO VENTED, MATTE BLACK, SET OF 2 -- Certified and approved by TUV in Germany; One-piece construction using aircraft grade aluminum; Fits securely between the hub and the wheel; Protects the wheels from brake dust for a constant shine; Will not affect new car warranty; Easy installation.

• Fit Note: 12 Double Spoke Design, Style 149, 20 in. Alloy Wheel, Wheel # 6764863
• Material: Aluminum
• Type: Direct fit
• Color/Finish: Matte black
• Quantity Sold: Set of 2
• Warranty: Lifetime Kleen Wheels limited warranty

Fits the following 2006-2008 BMW 750i submodels:

• 2006-2008: All Submodels; All Engines;

PRONTO BRAKE DISC, VENTED, SOLD INDIVIDUALLY

Repair your brake system with Pronto OE replacement brake discs. These are manufactured by ISO certified factories to meet OE fit, form, and function and ensure smooth and vibration-free braking. They are engineered to high metallurgical standards for consistent strength, quality, and performance. The discs are given a non-directional swirl finish to eliminate the need for machining prior to installation; and they feature precise hub hole chamfers to ensure a hub centric fit. All in all, you are assured of complete repair when you use Pronto OE replacements.

Specifications:

• 5 x 120 mm bolt pattern
• 324 mm disc diameter
• ISO certified

Features:

• Designed with multiple vane configurations for suitable heat dissipation and improved performance
• Precision balanced to guarantee smooth vibration-free performance and reduce brake noise
• Non-directional swirl finish does away with machining prior to installation
• Precise hub hole chamfers ensure hub centric fit

• Fit Note: Vehicle Made In Canada Or USA, Vehicle made in USA
• Location: Front
• Quantity Sold: Sold individually
• Design: Plain surface

Fits the following 1997-2000 BMW 540i submodels:

• 1997-2000: All Submodels; All Engines;

BECK ARNLEY PREMIUM BRAKE PADS, ORGANIC, 2-WHEEL SET

Restore the performance of your braking system with Beck Arnley Premium Brake Pads. These long lasting brake pads are made to be of exact fit and ready to install right out of the box. More than this, these pads are post-cured so that you don't need to have them broken in any more.

Features:

• Chamfered and/or slotted depending on OE design
• Formulated from rotor-friendly non-asbestos organic (NAO) friction materials
• Post-cured so there is no break-in required
• Pad assemblies are integrally molded and feature smooth-edged backing plates
• Precision-fit construction virtually eliminates noise and reduces dust output
• With chemically and mechanically bonded shims

• Fit Note: Thru Chassis Serial #1660621
• Location: Front
• Material: Organic
• Series: Beck Arnley Premium
• Type: OE replacement
• Quantity Sold: 2-wheel set
• Warranty: 36-month or 50,000-mile Beck Arnley limited warranty

Fits the following 1968-1969 BMW 2002 submodels:

• 1968-1969: All Submodels; All Engines;

WAGNER THERMOQUIET BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Replace your old and worn-down brake pads with Wagner ThermoQuiet, the most innovative and technologically-advanced brake pads available today. These feature a patented Integrally Molded Insulator (IMI) one-piece design that provides maximum noise damping and brake heat dissipation. Moreover, they are made using EDGE Laser-Shaped Friction technology that custom-shapes the friction material to focus caliper force, further reducing vibration and noise.

Features:

• Asbestos-free
• OE-match material and design
• Maximum noise damping
• Excellent heat dissipation during braking
• Superior stopping power
• Reduced dust
• Long lasting

• Location: Rear
• Material: Semi-metallic
• Series: Wagner ThermoQuiet
• Type: OE replacement
• Quantity Sold: 2-wheel set
• Warranty: Lifetime Wagner limited warranty

Fits the following 2003-2007 BMW Z4 submodels:

• 2006-2007: Coupe 3.0si; 6 Cyl 3.0L;
• 2006-2007: Roadster 3.0i; 6 Cyl 3.0L;

• 2006-2007: Roadster 3.0si; 6 Cyl 3.0L;
• 2003-2005: 2.5i; All Engines;
• 2003-2005: 3.0i; All Engines;

Fits 3 more submodels. (Show All) Show less info