Buick Electra Carburetor

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Not legal for sale or use on pollution controlled motor vehicles; Calibrated 2 percent leaner than Edelbrock number 1407; 750 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Electric non-EGR choke; For gasoline fuel; Air valve secondary type; Universal throttle linkage; Mid performance street and towing; Calibrated for economy with performance; Includes both timed and full vacuum ports for ignition advance, primary 0.110 and secondary 0.107 metering jets, 0.075 x 0.047 metering rods, and 5 in. Hg orange step-up spring; Designed for 402 c.i.d. and larger engines with Edelbrock Performer Manifolds and other brands of similar design; Recommended only for stock to performer level applications and not for use on RPM or Torker II intake manifolds; Provides excellent fuel economy; Use carb stud kits number 8008 or number 8024 if needed; With Edelbrock's limited 90-day warranty.

Fits the following 1977-1979 Buick Electra submodels:

• 1978-1979: Park Avenue; 8 Cyl 6.6L;
• 1977-1979: 225; 8 Cyl 6.6L;

• 1977-1979: Limited; 8 Cyl 6.6L;

Fits 1 more submodels. (Show all) Show less info

STREET PERFORMANCE CARBURETOR, 600 CFM -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Four Barrel, Easy Bolt On Installation, Vacuum Secondarys, Power Valve Blow-Out Protection, Wet-Flow Tested And Calibrated For Excellent Street Drivability, Vacuum Secondary, Square Flange, Model 4160, Use Adapter Part Number 17-6 When Using A Square Flange Carburetor With A Spread Bore Manifold

Fits the following 1970-1974 Buick Electra submodels:

• 1974-1974: 225 Custom; 8 Cyl 7.5L; "VIN W"
• 1974-1974: 225 Limited; 8 Cyl 7.5L; "VIN T"

• 1974-1974: 225 Limited; 8 Cyl 7.5L; "VIN U"

• 1974-1974: 225 Limited; 8 Cyl 7.5L; "VIN W"

• 1974-1974: 225; 8 Cyl 7.5L; "VIN W"

• 1972-1974: 225 Custom; 8 Cyl 7.5L; "VIN T"

• 1972-1974: 225; 8 Cyl 7.5L; "VIN T"

• 1971-1974: 225 Custom; 8 Cyl 7.5L; "VIN U"

• 1971-1974: 225; 8 Cyl 7.5L; "VIN U"

• 1973-1973: 225 Custom; 8 Cyl 7.5L; "VIN V"

• 1973-1973: 225; 8 Cyl 7.5L; "VIN V"

• 1973-1973: Base; 8 Cyl 7.5L; "VIN T"

• 1973-1973: Base; 8 Cyl 7.5L; "VIN V"

• 1970-1970: All Submodels; All Engines;

Fits 12 more submodels. (Show all) Show less info

49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Carb, 600 CFM, Leak Free Operation, Smooth Transition From Part To Full Throttle, Change Jets, Needles And Seats Or Adjust Floats On Car Without Draining Fuel, Sq-Flange, Electric Choke, With EGR, Includes Prim. Jet-0.086, Sec. Jet-0.095, Metering Rod-0.065x0.052

Fits the following 1977-1980 Buick Electra submodels:

• 1980-1980: Estate Wagon; 8 Cyl 5.7L;
• 1978-1980: Limited; 8 Cyl 5.7L;

• 1978-1980: Park Avenue; 8 Cyl 5.7L;

• 1978-1979: 225; 8 Cyl 5.7L;

• 1977-1977: 225; 8 Cyl 5.7L; "VIN J"

• 1977-1977: Limited; 8 Cyl 5.7L; "VIN J"

Fits 4 more submodels. (Show all) Show less info

STREET PERFORMANCE CARBURETOR, 750 CFM -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Four Barrel, Easy Bolt On Installation, Shiny Finish, Vacuum Secondarys, Power Valve Blow-Out Protection, Wet-Flow Tested And Calibrated For Excellent Street Drivability, Vacuum Secondary, Square Flange, Model 4160, Use Adapter Part Number 17-6 When Using A Square Flange Carburetor With A Spread Bore Manifold, Not For Use In California

Fits the following 1967-1969 Buick Electra submodels:

• 1967-1969: All Submodels; All Engines;

HOLLEY STREET CARBURETOR, POLISHED, NEW -- For off road use - Not legal for use on public roads and highways; 600 CFM; 4-barrel; Manual choke; Vacuum secondary type; Universal throttle linkage type; Single feed fuel inlet; Two corner idle system; Includes one timed spark port, one full vacuum, and one PCV port; Features next generation needle and seat design which eliminates the need for external float level adjustment; Calibrated for excellent street performance; Ford A/T kickdown, does not work with AOD transmissions.

Fits the following 1965-1969 Buick Electra submodels:

• 1968-1969: 225 Custom; 8 Cyl 7.0L;
• 1968-1969: 225; 8 Cyl 7.0L;

• 1965-1967: Base; 8 Cyl 7.0L;

• 1965-1966: Base; 8 Cyl 6.6L;

Fits 2 more submodels. (Show all) Show less info