Dodge Carburetor

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 600 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Manual non-EGR choke; For gasoline fuel; Air valve secondary type; Includes both timed and full vacuum ports for ignition advance, primary 0.100 and secondary 0.095 metering jets, metering rods, and 5 Hg orange step-up spring; Designed and calibrated for optimum street performance in small-block and some big-block engines; Matches with a variety of manifolds that include Edelbrock performer, performer EPS, performer RPM, RPM air-gap, Torker II, and other brands of similar design; Use carb stud kits part number 8008 or 8024 if needed; Electric choke part number 1478 can be added if needed.

Fits the following 1975-1988 Dodge W100 submodels:

• 1986-1988: Custom; 8 Cyl 5.9L;
• 1975-1977: Custom; 8 Cyl 7.2L;

HOLLEY STREET PERFORMANCE CARBURETOR, POLISHED, 600 CFM -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 4 Barrel, Features Vacuum Secondarys And Power Valve Blow-Out Protection, Wet-Flow Tested And Calibrated For Excellent Street Drivability, Comes With Square Flange, Model 4160, Electric Choke, Ford A/T Kickdown, 2 Full Manifold Vacuum Ports, And 1 Timed Banjo Push On Single Feed Inlet, Its Needle And Seat Design Eliminates The Need For External Float Adjustment, Easy Bolt-On Installation, Not For Use In California, With Holley's Limited Warranty

Fits the following 1966-1969 Dodge Charger submodels:

• 1969-1969: 500; 8 Cyl 6.3L; "VIN G"
• 1969-1969: SE; 8 Cyl 6.3L; "VIN G"

• 1967-1969: Base; 8 Cyl 6.3L; "VIN G"

• 1967-1969: R/T; 8 Cyl 6.3L; "VIN G"

• 1966-1966: Base; 8 Cyl 6.3L;

Fits 3 more submodels. (Show all) Show less info

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 600 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Electric choke; For gasoline fuel; Air valve secondary type; Includes both timed and full vacuum ports for ignition advance, primary 0.098 and secondary 0.095 metering jets, metering rods, and 4 Hg orange step-up spring; Designed and calibrated for optimum street performance in small-block and some big-block engines; Matches with a variety of manifolds that include Edelbrock performer, performer EPS, performer RPM, RPM air-gap, Torker II, and other brands of similar design; Use carb stud kits part number 8008 or 8024 if needed.

Fits the following 1975-1988 Dodge W100 submodels:

• 1986-1988: Custom; 8 Cyl 5.9L;
• 1975-1977: Custom; 8 Cyl 7.2L;

EDELBROCK THUNDER AVS SERIES CARBURETOR, CAST FINISH, 650 CFM -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; This Carburetor Is Built For Performance And Quality, Designed And Calibrated For Optimum Street Performance In Small-Block And Some Big-Block Engines, Matches With A Variety Of Manifolds That Include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II And Other Brands Of Similar Design, Comes With Primary 0.095 And Secondary 0.098 Metering Jets, 0.068 X 0.047 Metering Rods, And 5 in. HG Orange Step-Up Spring, May Need Carb Stud Kits #8008 Or #8024, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, With Exclusive 12-Month Edelbrock Thunder Series AVS Complete Satisfaction Warranty

Fits the following 1975-1988 Dodge W100 submodels:

• 1986-1988: Custom; 8 Cyl 5.9L;
• 1975-1977: Custom; 8 Cyl 7.2L;

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Not legal for sale or use on pollution controlled motor vehicles; Calibrated 2 percent leaner than Edelbrock number 1407; 750 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Electric non-EGR choke; For gasoline fuel; Air valve secondary type; Universal throttle linkage; Mid performance street and towing; Calibrated for economy with performance; Includes both timed and full vacuum ports for ignition advance, primary 0.110 and secondary 0.107 metering jets, 0.075 x 0.047 metering rods, and 5 in. Hg orange step-up spring; Designed for 402 c.i.d. and larger engines with Edelbrock Performer Manifolds and other brands of similar design; Recommended only for stock to performer level applications and not for use on RPM or Torker II intake manifolds; Provides excellent fuel economy; Use carb stud kits number 8008 or number 8024 if needed; With Edelbrock's limited 90-day warranty.

Fits the following 1978-1978 Dodge W150 submodels:

• 1978-1978: Base; 8 Cyl 7.2L;