Ford F-100 Pickup Carburetor

HOLLEY REMANUFACTURED CARBURETOR, MOTORCRAFT 2 BARREL -- Restored To OEM Specs Or Better With New Parts Then Flow Tested For Quality, Model 2100, Fits OEM Number D4Pe-Bfa, -Bfb, -Bga, -Pa, -Sa, -Ua, D4TE-Bca, -Ga, -Ha, -Ja, -Ra, -Sa, -Ta, D5Pe-Sa, D5TE-Asa, -Ata, Primary Throttle Plates, Shaft Bushings, Gaskets, Vacuum Diaphragms, Rubber Hoses, O-Rings, Electric Choke Cap And A New Viton Accelerator Pump Cup

Fits the following 1974 Ford F-100 Pickup submodels:

• 1974-1974: Base; 8 Cyl 5.9L; "GAS, VIN Y"
• 1974-1974: Base; 8 Cyl 6.4L; "GAS, VIN H"

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- 600 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Manual choke; For gasoline fuel; Air valve secondary type; Includes both timed and full vacuum ports for ignition advance, primary 0.100 and secondary 0.095 metering jets, 0.070 x 0.047 metering rods, and 5 Hg orange step-up spring; Designed and calibrated for optimum street performance in small-block and some big-block engines; Matches with a variety of manifolds that include Edelbrock performer, performer EPS, performer RPM, RPM air-gap, Torker II, and other brands of similar design; Use carb stud kits part number 8008 or 8024 if needed; Electric choke part number 1478 can be added if needed; With Edelbrock's limited 90-day warranty.

Fits the following 1973-1974 Ford F-100 Pickup submodels:

• 1973-1974: Base; 8 Cyl 7.5L; "GAS, CARB, VIN J"
• 1974-1974: Base; 8 Cyl 6.4L; "GAS, CARB, VIN M"

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- 600 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Electric choke; For gasoline fuel; Air valve secondary type; Includes both timed and full vacuum ports for ignition advance, primary 0.098 and secondary 0.095 metering jets, 0.075 x 0.047 metering rods, and 4 Hg orange step-up spring; Designed and calibrated for optimum street performance in small-block and some big-block engines; Matches with a variety of manifolds that include Edelbrock performer, performer EPS, performer RPM, RPM air-gap, Torker II, and other brands of similar design; Use carb stud kits part number 8008 or 8024 if needed; With Edelbrock's limited 90-day warranty.

Fits the following 1973-1974 Ford F-100 Pickup submodels:

• 1973-1974: Base; 8 Cyl 7.5L; "GAS, CARB, VIN J"
• 1974-1974: Base; 8 Cyl 6.4L; "GAS, CARB, VIN M"

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- Not legal for sale or use on pollution controlled motor vehicles; Calibrated 2 percent leaner than Edelbrock number 1407; 750 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Electric non-EGR choke; For gasoline fuel; Air valve secondary type; Universal throttle linkage; Mid performance street and towing; Calibrated for economy with performance; Includes both timed and full vacuum ports for ignition advance, primary 0.110 and secondary 0.107 metering jets, 0.075 x 0.047 metering rods, and 5 in. Hg orange step-up spring; Designed for 402 c.i.d. and larger engines with Edelbrock Performer Manifolds and other brands of similar design; Recommended only for stock to performer level applications and not for use on RPM or Torker II intake manifolds; Provides excellent fuel economy; Use carb stud kits number 8008 or number 8024 if needed; With Edelbrock's limited 90-day warranty.

Fits the following 1973-1974 Ford F-100 Pickup submodels:

• 1973-1974: Base; 8 Cyl 7.5L; "GAS, CARB, VIN J"

Thunder Series AVS, Carb, 650 CFM, Leak Free Operation, Smooth Transition From Part To Full Throttle, Change Jets, Needles And Seats Or Adjust Floats On Car Without Draining Fuel, Sq-Flange, Electric Choke, Without EGR, Includes Prim. Jet-0.095, Sec. Jet-0.098, MeteringRod-0.068x0.047, New, Not For Sale Or Use On Emissions Equipped Vehicles

Fits the following 1973-1974 Ford F-100 Pickup submodels:

• 1973-1974: Base; 8 Cyl 7.5L; "GAS, CARB, VIN J"
• 1974-1974: Base; 8 Cyl 6.4L; "GAS, CARB, VIN M"

Thunder Series AVS, Off-Road Carb, 650 CFM, Leak Free Operation, Smooth Transition From Part To Full Throttle, Change Jets, Needles And Seats Or Adjust Floats On Car Without Draining Fuel, Sq-Flange, Electric Choke, Without EGR, Prim. Jet-0.095, Sec. Jet-0.098, MeteringRod-0.068x0.047, New, Not For Sale Or Use On Emissions Equipped Vehicles

Fits the following 1973-1974 Ford F-100 Pickup submodels:

• 1973-1974: Base; 8 Cyl 7.5L; "GAS, CARB, VIN J"
• 1974-1974: Base; 8 Cyl 6.4L; "GAS, CARB, VIN M"

EDELBROCK THUNDER AVS SERIES CARBURETOR, CAST FINISH, 650 CFM -- This Carburetor Is Built For Performance And Quality, Designed And Calibrated For Optimum Street Performance In Small-Block And Some Big-Block Engines, Matches With A Variety Of Manifolds That Include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II And Other Brands Of Similar Design, Comes With Primary 0.095 And Secondary 0.098 Metering Jets, 0.068 X 0.047 Metering Rods, And 5 in. HG Orange Step-Up Spring, May Need Carb Stud Kits #8008 Or #8024, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, With Exclusive 12-Month Edelbrock Thunder Series AVS Complete Satisfaction Warranty

Fits the following 1973-1974 Ford F-100 Pickup submodels:

• 1973-1974: Base; 8 Cyl 7.5L; "GAS, CARB, VIN J"
• 1974-1974: Base; 8 Cyl 6.4L; "GAS, CARB, VIN M"