Plymouth Belvedere II Carburetor

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 600 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Manual non-EGR choke; For gasoline fuel; Air valve secondary type; Includes both timed and full vacuum ports for ignition advance, primary 0.100 and secondary 0.095 metering jets, metering rods, and 5 Hg orange step-up spring; Designed and calibrated for optimum street performance in small-block and some big-block engines; Matches with a variety of manifolds that include Edelbrock performer, performer EPS, performer RPM, RPM air-gap, Torker II, and other brands of similar design; Use carb stud kits part number 8008 or 8024 if needed; Electric choke part number 1478 can be added if needed.

Fits the following 1965-1967 Plymouth Belvedere II submodels:

• 1967-1967: Base; 8 Cyl 7.2L;
• 1965-1967: Base; 8 Cyl 7.0L;

HOLLEY STREET CARBURETOR, NEW -- For off road use - Not legal for use on public roads and highways; 850 CFM; 4-barrel; Electric choke; Vacuum secondary type; Universal throttle linkage type; Dual feed fuel inlet; Secondary power valve; Includes one timed spark port, one full vacuum, and one PCV port; Ford A/T kickdown, does not work with AOD transmissions; Perfect calibration for 502 crate motors.

Fits the following 1965-1967 Plymouth Belvedere II submodels:

• 1967-1967: Base; 8 Cyl 7.2L;
• 1965-1967: Base; 8 Cyl 4.5L;

• 1965-1967: Base; 8 Cyl 5.2L;

• 1965-1967: Base; 8 Cyl 6.3L;

• 1965-1967: Base; 8 Cyl 7.0L;

• 1966-1966: Base; 8 Cyl 5.9L;

Fits 4 more submodels. (Show all) Show less info

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 600 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Electric choke; For gasoline fuel; Air valve secondary type; Includes both timed and full vacuum ports for ignition advance, primary 0.098 and secondary 0.095 metering jets, metering rods, and 4 Hg orange step-up spring; Designed and calibrated for optimum street performance in small-block and some big-block engines; Matches with a variety of manifolds that include Edelbrock performer, performer EPS, performer RPM, RPM air-gap, Torker II, and other brands of similar design; Use carb stud kits part number 8008 or 8024 if needed.

Fits the following 1965-1967 Plymouth Belvedere II submodels:

• 1967-1967: Base; 8 Cyl 7.2L;
• 1965-1967: Base; 8 Cyl 7.0L;

EDELBROCK THUNDER AVS SERIES CARBURETOR, CAST FINISH, 650 CFM -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; This Carburetor Is Built For Performance And Quality, Designed And Calibrated For Optimum Street Performance In Small-Block And Some Big-Block Engines, Matches With A Variety Of Manifolds That Include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II And Other Brands Of Similar Design, Comes With Primary 0.095 And Secondary 0.098 Metering Jets, 0.068 X 0.047 Metering Rods, And 5 in. HG Orange Step-Up Spring, May Need Carb Stud Kits #8008 Or #8024, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, With Exclusive 12-Month Edelbrock Thunder Series AVS Complete Satisfaction Warranty

Fits the following 1965-1967 Plymouth Belvedere II submodels:

• 1967-1967: Base; 8 Cyl 7.2L;
• 1965-1967: Base; 8 Cyl 7.0L;

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Not legal for sale or use on pollution controlled motor vehicles; Calibrated 2 percent leaner than Edelbrock number 1407; 750 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Electric non-EGR choke; For gasoline fuel; Air valve secondary type; Universal throttle linkage; Mid performance street and towing; Calibrated for economy with performance; Includes both timed and full vacuum ports for ignition advance, primary 0.110 and secondary 0.107 metering jets, 0.075 x 0.047 metering rods, and 5 in. Hg orange step-up spring; Designed for 402 c.i.d. and larger engines with Edelbrock Performer Manifolds and other brands of similar design; Recommended only for stock to performer level applications and not for use on RPM or Torker II intake manifolds; Provides excellent fuel economy; Use carb stud kits number 8008 or number 8024 if needed; With Edelbrock's limited 90-day warranty.

Fits the following 1965-1967 Plymouth Belvedere II submodels:

• 1967-1967: Base; 8 Cyl 7.2L;
• 1965-1967: Base; 8 Cyl 7.0L;