Dodge 600 Catalytic Converter

CATCO DIRECT FIT CATALYTIC CONVERTER -- 49-state legal, pre-OBDII, not legal for sale or use in California; Cannot be shipped to California addresses; 2-bolt flange with Chrysler flare inlet; 1.875 in. outlet; Single inlet and outlet configuration; 40.5 in. overall length; With one air tube provision; Includes heat shield and necessary gasket for a complete installation; Ceramic monolith catalyst substrate; Oval stainless steel casing; Designed with 409 stainless steel pipes and shell for longer life; With Catco's 5-year or 50,000-mile warranty on converter body and 25,000-mile warranty on emissions.

Fits the following 1986-1988 Dodge 600 submodels:

• 1986-1986: ES; 4 Cyl 2.5L;
• 1986-1988: Base; 4 Cyl 2.5L;

• 1986-1988: SE; 4 Cyl 2.5L;

• 1987-1988: Base; 4 Cyl 2.2L;

• 1987-1988: SE; 4 Cyl 2.2L;

Fits 3 more submodels. (Show all) Show less info

CATCO DIRECT FIT CATALYTIC CONVERTER -- 49-state legal, pre-OBDII, not legal for sale or use in California; Cannot be shipped to California addresses; 2.5 in. inlet; 1.875 in. outlet; Single inlet and outlet configuration; 61 in. overall length; Includes heat shield and necessary gasket for a complete installation; Ceramic monolith catalyst substrate; Oval stainless steel casing; Designed with 409 stainless steel pipes and shell for longer life; With Catco's 5-year or 50,000-mile warranty on converter body and 25,000-mile warranty on emissions.

Fits the following 1987-1988 Dodge 600 submodels:

• 1987-1988: Base; 4 Cyl 2.2L;
• 1987-1988: SE; 4 Cyl 2.2L;

CATCO DIRECT FIT CATALYTIC CONVERTER -- 49-state legal, OBDII, not legal for sale or use in California; Cannot be shipped to California addresses; 2-bolt flange with Chrysler flare inlet; 1.875 in. outlet; Single inlet and outlet configuration; 39.5 in. overall length; Includes heat shield and necessary gasket for a complete installation; Ceramic monolith catalyst substrate; Oval stainless steel casing; Designed with 409 stainless steel pipes and shell for longer life; With Catco's 5-year or 50,000-mile warranty on converter body and 25,000-mile warranty on emissions.

Fits the following 1983-1985 Dodge 600 submodels:

• 1983-1985: Base; 4 Cyl 2.2L;
• 1983-1985: Base; 4 Cyl 2.6L;

• 1983-1985: ES; 4 Cyl 2.2L;

• 1983-1985: ES; 4 Cyl 2.6L;

• 1985-1985: SE; 4 Cyl 2.2L;

• 1985-1985: SE; 4 Cyl 2.6L;

Fits 4 more submodels. (Show all) Show less info

CATCO DIRECT FIT CATALYTIC CONVERTER -- 49-state legal, pre-OBDII, not legal for sale or use in California; Cannot be shipped to California addresses; 2 in. 2-bolt flange with Chrysler flare inlet; 1.875 in. outlet; Single inlet and outlet configuration; 40.75 in. overall length; With one air tube provision; Includes heat shield and necessary gasket for a complete installation; Ceramic monolith catalyst substrate; Round stainless steel casing; Designed with 409 stainless steel pipes and shell for longer life; With Catco's 5-year or 50,000-mile warranty on converter body and 25,000-mile warranty on emissions.

Fits the following 1983-1986 Dodge 600 submodels:

• 1983-1985: Base; 4 Cyl 2.6L;
• 1983-1985: ES; 4 Cyl 2.6L;

• 1983-1986: Base; 4 Cyl 2.2L;

• 1983-1986: ES; 4 Cyl 2.2L;

• 1985-1985: SE; 4 Cyl 2.6L;

• 1985-1986: SE; 4 Cyl 2.2L;

Fits 4 more submodels. (Show all) Show less info

MAGNAFLOW 91000 SERIES CATALYTIC CONVERTER -- 49-state legal, OBDII, EPA compliant, not for sale or use in California; Cannot be shipped to California addresses; 3-way catalyst style; 2 in. inlet and outlet; Single inlet and outlet configuration; 9 in. body length, 6.5 in. width, 4 in. thick, 13 in. overall length; 4,500 lb. GVW; Includes stainless steel heat shield; Ceramic honeycomb catalyst substrate; Oval stainless steel casing; Designed for use with small to medium sized engine displacements where space is limited; The main benefit of this catalytic converter is that one unit may cover a wide variety of vehicle makes and models; Installing this converter often requires the use of welding, cutting, and tube bending equipment that is readily available to most professional installers; With Magnaflow's limited warranty.

Fits the following 1984-1985 Dodge 600 submodels:

• 1984-1984: Base; 4 Cyl 2.2L; "Gas, CARB, Naturally Aspirated, VIN C"
• 1984-1984: ES; 4 Cyl 2.2L; "Gas, CARB, Naturally Aspirated, VIN C"

• 1984-1985: ES; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

• 1984-1985: ES; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

• 1985-1985: Base; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

• 1985-1985: Base; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

• 1985-1985: SE; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

• 1985-1985: SE; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

Fits 6 more submodels. (Show all) Show less info

MAGNAFLOW 91000 SERIES CATALYTIC CONVERTER -- 49-state legal, OBDII, EPA compliant, not for sale or use in California; Cannot be shipped to California addresses; 3-way catalyst style; 2.5 in. inlet and outlet; Single inlet and outlet configuration; 9 in. body length, 6.5 in. width, 4 in. thick, 13 in. overall length; 4,500 lb. GVW; Ceramic honeycomb catalyst substrate; Oval stainless steel casing; Designed for use with small to medium sized engine displacements where space is limited; The main benefit of this catalytic converter is that one unit may cover a wide variety of vehicle makes and models; Installing this converter often requires the use of welding, cutting, and tube bending equipment that is readily available to most professional installers; With Magnaflow's limited warranty.

Fits the following 1986-1988 Dodge 600 submodels:

• 1986-1986: ES; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"
• 1986-1986: ES; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

• 1986-1987: Base; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

• 1986-1988: Base; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

• 1986-1988: SE; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

• 1986-1988: SE; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

Fits 4 more submodels. (Show all) Show less info

MAGNAFLOW 94000 SERIES CATALYTIC CONVERTER -- 49-state legal, OBDII, EPA compliant, not for sale or use in California; Cannot be shipped to California addresses; 3-way catalyst style; 2 in. inlet and outlet; Single inlet and outlet configuration; 12 in. body length, 6.5 in. width, 4 in. thick, 16 in. overall length; 6,000 lb. GVW; Includes stainless steel heat shield; Ceramic honeycomb catalyst substrate; Oval stainless steel casing; The most versatile converter of Magnaflow; The main benefit of this catalytic converter is that one unit may cover a wide variety of vehicle makes and models; Installing this converter often requires the use of welding, cutting, and tube bending equipment that is readily available to most professional installers; With Magnaflow's limited warranty.

Fits the following 1983-1985 Dodge 600 submodels:

• 1983-1985: Base; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN G"
• 1983-1985: ES; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN G"

• 1985-1985: SE; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN G"

Fits 1 more submodels. (Show all) Show less info

MAGNAFLOW 94000 SERIES CATALYTIC CONVERTER, WITH SINGLE AIR TUBE -- 3-Way Plus Oxidation, 2 in. Center Inlet And Outlet, 12 in. X 6.5 in. Standard Oval Body, 16 in. Overall Length, The Most Versatile Converter Of Magnaflow, The Main Benefit Of This Catalytic Converter Is That One Unit May Cover A Wide Variety Of Vehicle Makes And Models, Installing This Converter Often Requires The Use Of Welding, Cutting And Tube Bending Equipment That Is Readily Available To Most Professional Installers, 49-State OBDII Legal, For Pre-OBDII Only When Used On California-Registered Vehicles, With Magnaflow's Limited Warranty

Fits the following 1983-1988 Dodge 600 submodels:

• 1983-1984: Base; 4 Cyl 2.2L; "Gas, CARB, Naturally Aspirated, VIN C"
• 1983-1984: ES; 4 Cyl 2.2L; "Gas, CARB, Naturally Aspirated, VIN C"

• 1984-1986: ES; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

• 1984-1986: ES; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

• 1985-1987: Base; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

• 1985-1988: Base; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

• 1985-1988: SE; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

• 1985-1988: SE; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

• 1986-1986: ES; 4 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN K"

• 1986-1988: Base; 4 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN K"

• 1986-1988: SE; 4 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN K"

Fits 9 more submodels. (Show all) Show less info

MAGNAFLOW DIRECT-FIT CATALYTIC CONVERTER -- 2 in. Chrysler Bead Spin Flange Inlet, 1.875 in. Outlet, 39.625 in. Overall Length, Designed To Exact Original Equipment Specifications, Easy Bolt-On Installation, 49-State OBDII Legal, For Pre-OBDII Only When Used On California-Registered Vehicles, With Magnaflow's Limited Warranty

Fits the following 1986-1988 Dodge 600 submodels:

• 1986-1986: ES; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"
• 1986-1986: ES; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

• 1986-1986: ES; 4 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN K"

• 1986-1987: Base; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

• 1986-1988: Base; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

• 1986-1988: Base; 4 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN K"

• 1986-1988: SE; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

• 1986-1988: SE; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

• 1986-1988: SE; 4 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN K"

Fits 7 more submodels. (Show all) Show less info

MAGNAFLOW DIRECT-FIT CATALYTIC CONVERTER -- 2.5 in. Chrysler Bead Spin Flange Inlet, 1.875 in. Outlet, 38.5 in. Overall Length, Designed To Exact Original Equipment Specifications, Easy Bolt-On Installation, 49-State OBDII Legal, For Pre-OBDII Only When Used On California-Registered Vehicles, With Magnaflow's Limited Warranty

Fits the following 1983-1985 Dodge 600 submodels:

• 1983-1985: Base; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN G"
• 1983-1985: ES; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN G"

• 1985-1985: SE; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN G"

Fits 1 more submodels. (Show all) Show less info

MAGNAFLOW DIRECT-FIT CATALYTIC CONVERTER -- 2 in. Chrysler Bead Spin Flange Inlet, 1.875 in. Outlet, 40.5 in. Overall Length, Designed To Exact Original Equipment Specifications, Easy Bolt-On Installation, 49-State OBDII Legal, For Pre-OBDII Only When Used On California-Registered Vehicles, With Magnaflow's Limited Warranty

Fits the following 1983-1984 Dodge 600 submodels:

• 1983-1984: Base; 4 Cyl 2.2L; "Gas, CARB, Naturally Aspirated, VIN C"
• 1983-1984: ES; 4 Cyl 2.2L; "Gas, CARB, Naturally Aspirated, VIN C"

• 1984-1984: ES; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

• 1984-1984: ES; 4 Cyl 2.2L; "Gas, FI, Naturally Aspirated, VIN D"

Fits 2 more submodels. (Show all) Show less info

CATALYTIC CONVERTER: DIRECT FIT -- An Industry Leader For Domestic And Import Applications, Designed For Fast, Easy Installation, Includes Thicker OE-Quality Flanges, Stainless Steel Body, Oxygen Sensor Fittings (if applicable), Heat Shield Pipe And Structural Brace For Enhanced Strength And Durability, Stock Replacement, Original Equipment Quality, Sold Individually

Fits the following 1986-1987 Dodge 600 submodels:

• 1986-1986: ES; 4 Cyl 2.2L; "GAS, FI, VIN D"
• 1986-1987: Base; 4 Cyl 2.2L; "GAS, FI, VIN D"

• 1986-1987: SE; 4 Cyl 2.2L; "GAS, FI, VIN D"

Fits 1 more submodels. (Show all) Show less info

CATALYTIC CONVERTER: DIRECT FIT -- An Industry Leader For Domestic And Import Applications, Designed For Fast, Easy Installation, Includes Thicker OE-Quality Flanges, Stainless Steel Body, Oxygen Sensor Fittings (if applicable), Heat Shield Pipe And Structural Brace For Enhanced Strength And Durability, Stock Replacement, Original Equipment Quality, Sold Individually

Fits the following 1987-1988 Dodge 600 submodels:

• 1987-1988: Base; 4 Cyl 2.5L;
• 1987-1988: SE; 4 Cyl 2.5L;

CATALYTIC CONVERTER: DIRECT FIT -- An Industry Leader For Domestic And Import Applications, Designed For Fast, Easy Installation, Includes Thicker OE-Quality Flanges, Stainless Steel Body, Oxygen Sensor Fittings (if applicable), Heat Shield Pipe And Structural Brace For Enhanced Strength And Durability, Stock Replacement, Original Equipment Quality, Sold Individually

Fits the following 1983-1984 Dodge 600 submodels:

• 1983-1984: Base; 4 Cyl 2.2L; "GAS, CARB, VIN C"
• 1983-1984: ES; 4 Cyl 2.2L; "GAS, CARB, VIN C"

• 1984-1984: Base; 4 Cyl 2.2L; "GAS, FI, VIN D"

• 1984-1984: ES; 4 Cyl 2.2L; "GAS, FI, VIN D"

Fits 2 more submodels. (Show all) Show less info